[PATCH v3 1/2] dt-bindings: pwm: Add Xilinx AXI Timer

[Sean Anderson]

This adds a binding for the Xilinx LogiCORE IP AXI Timer. This device is
a "soft" block, so it has many parameters which would not be
configurable in most hardware. This binding is usually automatically
generated by Xilinx's tools, so the names and values of some properties
must be kept as they are. Replacement properties have been provided for
new device trees.

Because we need to init timer devices so early in boot, the easiest way
to configure things is to use a device tree property. For the moment
this is 'xlnx,pwm', but this could be extended/renamed/etc. in the
future if these is a need for a generic property.

Signed-off-by: Sean Anderson <sean.anderson at seco.com>
---
How should the clocking situation be documented? For the moment I have
just left clock as optional, but should clock-frequency be documented?

Changes in v3:
- Mark all boolean-as-int properties as deprecated
- Add xlnx,pwm and xlnx,gen?-active-low properties.
- Make newer replacement properties mutually-exclusive with what they
  replace
- Add an example with non-deprecated properties only.

Changes in v2:
- Use 32-bit addresses for example binding

 .../bindings/pwm/xlnx,axi-timer.yaml          | 142 ++++++++++++++++++
 1 file changed, 142 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pwm/xlnx,axi-timer.yaml

diff --git a/Documentation/devicetree/bindings/pwm/xlnx,axi-timer.yaml b/Documentation/devicetree/bindings/pwm/xlnx,axi-timer.yaml
new file mode 100644
index 000000000000..a5e90658e31a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/xlnx,axi-timer.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/xlnx,axi-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx LogiCORE IP AXI Timer Device Tree Binding
+
+maintainers:
+  - Sean Anderson <sean.anderson at seco.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+        - const: xlnx,axi-timer-2.0
+        - const: xlnx,xps-timer-1.00.a
+      - const: xlnx,xps-timer-1.00.a
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: s_axi_aclk
+
+  reg:
+    maxItems: 1
+
+  xlnx,count-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 8
+    maximum: 32
+    description:
+      The width of the counter(s), in bits.
+
+  xlnx,gen0-assert:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    default: 1
+    deprecated: true
+    description:
+      The polarity of the generateout0 signal. 0 for active-low, 1 for active-high.
+
+  xlnx,gen0-active-low:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The generate0 signal is active-low.
+
+  xlnx,gen1-assert:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    default: 1
+    deprecated: true
+    description:
+      The polarity of the generateout1 signal. 0 for active-low, 1 for active-high.
+
+  xlnx,gen1-active-low:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The generate1 signal is active-low.
+
+  xlnx,one-timer-only:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    deprecated: true
+    description:
+      Whether only one timer is present in this block.
+
+  xlnx,single-timer:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Only one timer is present in this block.
+
+  xlnx,pwm:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      This timer should be configured as a PWM.
+
+required:
+  - compatible
+  - reg
+  - xlnx,count-width
+
+allOf:
+  - if:
+      required:
+        - clocks
+    then:
+      required:
+        - clock-names
+
+  - if:
+      required:
+        - xlnx,gen0-active-low
+    then:
+      not:
+        required:
+          - xlnx,gen0-assert
+
+  - if:
+      required:
+        - xlnx,gen0-active-low
+    then:
+      not:
+        required:
+          - xlnx,gen0-assert
+
+  - if:
+      required:
+        - xlnx,one-timer-only
+    then:
+      not:
+        required:
+          - xlnx,single-timer
+
+additionalProperties: true
+
+examples:
+  - |
+    axi_timer_0: timer at 800e0000 {
+        clock-names = "s_axi_aclk";
+        clocks = <&zynqmp_clk 71>;
+        compatible = "xlnx,axi-timer-2.0", "xlnx,xps-timer-1.00.a";
+        reg = <0x800e0000 0x10000>;
+        xlnx,count-width = <0x20>;
+        xlnx,gen0-assert = <0x1>;
+        xlnx,gen1-assert = <0x1>;
+        xlnx,one-timer-only = <0x0>;
+        xlnx,trig0-assert = <0x1>;
+        xlnx,trig1-assert = <0x1>;
+    };
+
+  - |
+    axi_timer_0: timer at 800e0000 {
+        clock-names = "s_axi_aclk";
+        clocks = <&zynqmp_clk 71>;
+        compatible = "xlnx,axi-timer-2.0", "xlnx,xps-timer-1.00.a";
+        reg = <0x800e0000 0x10000>;
+        xlnx,count-width = <0x20>;
+        xlnx,gen0-active-low;
+        xlnx,single-timer;
+    };
-- 
2.25.1