[v3 RESEND, PATCH 3/3] drm/mediatek: dpi: add bus format negotiation

[Chun-Kuang Hu]

Hi, Rex:

Rex-BC Chen <rex-bc.chen at mediatek.com> 於 2021年4月29日 週四 下午12:16寫道：
>
> Add the atomic_get_output_bus_fmts, atomic_get_input_bus_fmts to negotiate
> the possible output and input formats for the current mode and monitor,
> and use the negotiated formats in a basic atomic_check callback.
>
> Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
> Signed-off-by: Rex-BC Chen <rex-bc.chen at mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 92 ++++++++++++++++++++++++++++--
>  1 file changed, 87 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index c548780dd3a5..8822d9448ae8 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -536,6 +536,87 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
>         return 0;
>  }
>
> +#define MAX_OUTPUT_SEL_FORMATS 2
> +
> +static u32 *mtk_dpi_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge,
> +                                       struct drm_bridge_state *bridge_state,
> +                                       struct drm_crtc_state *crtc_state,
> +                                       struct drm_connector_state *conn_state,
> +                                       unsigned int *num_output_fmts)
> +{
> +       u32 *output_fmts;
> +       struct mtk_dpi *dpi = bridge_to_dpi(bridge);
> +
> +       *num_output_fmts = 0;
> +
> +       output_fmts = kcalloc(MAX_OUTPUT_SEL_FORMATS, sizeof(*output_fmts),
> +                             GFP_KERNEL);
> +       if (!output_fmts)
> +               return NULL;
> +
> +       /* Default 8bit RGB fallback */
> +       if (dpi->conf->dual_edge) {
> +               output_fmts[0] =  MEDIA_BUS_FMT_RGB888_2X12_LE;
> +               output_fmts[1] =  MEDIA_BUS_FMT_RGB888_2X12_BE;
> +               *num_output_fmts = 2;
> +       } else {
> +               output_fmts[0] =  MEDIA_BUS_FMT_RGB888_1X24;
> +               *num_output_fmts = 1;
> +       }
> +
> +       return output_fmts;
> +}
> +
> +#define MAX_INPUT_SEL_FORMATS  1
> +
> +static u32 *mtk_dpi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
> +                                       struct drm_bridge_state *bridge_state,
> +                                       struct drm_crtc_state *crtc_state,
> +                                       struct drm_connector_state *conn_state,
> +                                       u32 output_fmt,
> +                                       unsigned int *num_input_fmts)
> +{
> +       u32 *input_fmts;
> +
> +       *num_input_fmts = 0;
> +
> +       input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts),
> +                            GFP_KERNEL);
> +       if (!input_fmts)
> +               return NULL;
> +
> +       *num_input_fmts = 1;
> +       input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
> +
> +       return input_fmts;
> +}
> +
> +static int mtk_dpi_bridge_atomic_check(struct drm_bridge *bridge,
> +                                      struct drm_bridge_state *bridge_state,
> +                                      struct drm_crtc_state *crtc_state,
> +                                      struct drm_connector_state *conn_state)
> +{
> +       struct mtk_dpi *dpi = bridge->driver_private;
> +       unsigned int out_bus_format;
> +
> +       out_bus_format = bridge_state->output_bus_cfg.format;
> +
> +       dev_dbg(dpi->dev, "input format 0x%04x, output format 0x%04x\n",
> +               bridge_state->input_bus_cfg.format,
> +               bridge_state->output_bus_cfg.format);
> +
> +       dpi->ddr_edge_sel = (out_bus_format == MEDIA_BUS_FMT_RGB888_2X12_LE) ?
> +                               true : false;

I would like to keep the out_bus_format rather than keep ddr_edge_sel,
and in mtk_dpi_dual_edge() use dpi->out_bus_format to decide edge
selection.

Regards,
Chun-Kuang.

> +
> +       dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
> +       dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
> +       dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
> +       dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> +
> +       return 0;
> +}
> +
>  static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
>                                  enum drm_bridge_attach_flags flags)
>  {
>
> @@ -574,6 +655,12 @@ static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = {
>         .mode_set = mtk_dpi_bridge_mode_set,
>         .disable = mtk_dpi_bridge_disable,
>         .enable = mtk_dpi_bridge_enable,
> +       .atomic_check = mtk_dpi_bridge_atomic_check,
> +       .atomic_get_output_bus_fmts = mtk_dpi_bridge_atomic_get_output_bus_fmts,
> +       .atomic_get_input_bus_fmts = mtk_dpi_bridge_atomic_get_input_bus_fmts,
> +       .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
> +       .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
> +       .atomic_reset = drm_atomic_helper_bridge_reset,
>  };
>
>  void mtk_dpi_start(struct device *dev)
> @@ -620,11 +707,6 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
>         }
>         drm_connector_attach_encoder(dpi->connector, &dpi->encoder);
>
> -       dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
> -       dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
> -       dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
> -       dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> -
>         return 0;
>
>  err_cleanup:
> --
> 2.18.0
>