[PATCH v2 2/3] mmc: sdhci-esdhc-imx: advertise HS400 mode through MMC caps

[Lucas Stach]

Instead of having an indirection through the SDHCI layer and emulating
a capability bit, that isn't there in hardware, do the same same thing
as with HS400_ES and advertise the support for HS400 directly through
the MMC caps.

Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
 drivers/mmc/host/sdhci-esdhc-imx.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index a20459744d21..65a52586db36 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -427,9 +427,6 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
 					| FIELD_PREP(SDHCI_RETUNING_MODE_MASK,
 						     SDHCI_TUNING_MODE_3);
 
-			if (imx_data->socdata->flags & ESDHC_FLAG_HS400)
-				val |= SDHCI_SUPPORT_HS400;
-
 			/*
 			 * Do not advertise faster UHS modes if there are no
 			 * pinctrl states for 100MHz/200MHz.
@@ -1603,7 +1600,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 		host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
 
 	if (imx_data->socdata->flags & ESDHC_FLAG_HS400)
-		host->quirks2 |= SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400;
+		host->mmc->caps2 |= MMC_CAP2_HS400;
 
 	if (imx_data->socdata->flags & ESDHC_FLAG_BROKEN_AUTO_CMD23)
 		host->quirks2 |= SDHCI_QUIRK2_ACMD23_BROKEN;
-- 
2.31.1