[PATCH] ARM: dts: rockchip: Remove more clock-names from PWM nodes A test with the command below gives this error:

[Johan Jonker]

/arch/arm/boot/dts/rk3228-evb.dt.yaml:
pwm at 110b0020: clock-names: ['pwm'] is too short

Devices with only one PWM clock use it to both to derive the functional
clock for the device and as the bus clock. The driver does not need
"clock-names" to get a handle, so remove them all.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml

Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
---
 arch/arm/boot/dts/rk322x.dtsi | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 9fbd96c3f..61028a5c9 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -384,7 +384,6 @@
 		reg = <0x110b0000 0x10>;
 		#pwm-cells = <3>;
 		clocks = <&cru PCLK_PWM>;
-		clock-names = "pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm0_pin>;
 		status = "disabled";
@@ -395,7 +394,6 @@
 		reg = <0x110b0010 0x10>;
 		#pwm-cells = <3>;
 		clocks = <&cru PCLK_PWM>;
-		clock-names = "pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm1_pin>;
 		status = "disabled";
@@ -406,7 +404,6 @@
 		reg = <0x110b0020 0x10>;
 		#pwm-cells = <3>;
 		clocks = <&cru PCLK_PWM>;
-		clock-names = "pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm2_pin>;
 		status = "disabled";
@@ -417,7 +414,6 @@
 		reg = <0x110b0030 0x10>;
 		#pwm-cells = <2>;
 		clocks = <&cru PCLK_PWM>;
-		clock-names = "pwm";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm3_pin>;
 		status = "disabled";
-- 
2.11.0