[PATCH 02/11] ASoC: hdmi-codec: Rework to support more controls

Maxime Ripard maxime at cerno.tech
Fri May 7 07:03:25 PDT 2021


We're going to add more controls to support the IEC958 output, so let's
rework the control registration a bit to support more of them.

Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
 sound/soc/codecs/hdmi-codec.c | 43 ++++++++++++++++++++++-------------
 1 file changed, 27 insertions(+), 16 deletions(-)

diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
index 422539f933de..bc0d695d2df0 100644
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -621,21 +621,23 @@ static const struct snd_soc_dai_ops hdmi_codec_spdif_dai_ops = {
 			 SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE |\
 			 SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE)
 
-static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime *rtd,
-			      struct snd_soc_dai *dai)
-{
-	struct snd_soc_dai_driver *drv = dai->driver;
-	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
-	struct snd_kcontrol *kctl;
-	struct snd_kcontrol_new hdmi_eld_ctl = {
-		.access	= SNDRV_CTL_ELEM_ACCESS_READ |
-			  SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+struct snd_kcontrol_new hdmi_codec_controls[] = {
+	{
+		.access	= (SNDRV_CTL_ELEM_ACCESS_READ |
+			   SNDRV_CTL_ELEM_ACCESS_VOLATILE),
 		.iface	= SNDRV_CTL_ELEM_IFACE_PCM,
 		.name	= "ELD",
 		.info	= hdmi_eld_ctl_info,
 		.get	= hdmi_eld_ctl_get,
-		.device	= rtd->pcm->device,
-	};
+	},
+};
+
+static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime *rtd,
+			      struct snd_soc_dai *dai)
+{
+	struct snd_soc_dai_driver *drv = dai->driver;
+	struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
+	unsigned int i;
 	int ret;
 
 	ret =  snd_pcm_add_chmap_ctls(rtd->pcm, SNDRV_PCM_STREAM_PLAYBACK,
@@ -652,12 +654,21 @@ static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime *rtd,
 	hcp->chmap_info->chmap = hdmi_codec_stereo_chmaps;
 	hcp->chmap_idx = HDMI_CODEC_CHMAP_IDX_UNKNOWN;
 
-	/* add ELD ctl with the device number corresponding to the PCM stream */
-	kctl = snd_ctl_new1(&hdmi_eld_ctl, dai->component);
-	if (!kctl)
-		return -ENOMEM;
+	for (i = 0; i < ARRAY_SIZE(hdmi_codec_controls); i++) {
+		struct snd_kcontrol *kctl;
 
-	return snd_ctl_add(rtd->card->snd_card, kctl);
+		/* add ELD ctl with the device number corresponding to the PCM stream */
+		kctl = snd_ctl_new1(&hdmi_codec_controls[i], dai->component);
+		if (!kctl)
+			return -ENOMEM;
+
+		kctl->id.device = rtd->pcm->device;
+		ret = snd_ctl_add(rtd->card->snd_card, kctl);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
 }
 
 static int hdmi_dai_probe(struct snd_soc_dai *dai)
-- 
2.31.1




More information about the linux-arm-kernel mailing list