[PATCH 1/1] arm64: dts: mt8183-kukui: Enable thermal Tboard

Michael Kao michael.kao at mediatek.com
Wed May 5 22:11:44 PDT 2021


Hi Maintainers,

Gentle pin for this patch.

Thanks

On Fri, 2021-04-09 at 15:16 +0800, Hsin-Yi Wang wrote:
> On Fri, Apr 9, 2021 at 3:12 PM Michael Kao <michael.kao at mediatek.com>
> wrote:
> > 
> > Add Tboard thermal sensor settings.
> > 
> > pull-up voltage: 1800 mv
> > pull-up resistor: 75K
> > 
> > Vsense = pull-up voltage * Rntc / ( pull-up resistor + Rntc )
> > AuxIn = Vsense * 4096 / 1500
> > 
> > TEST=boot kukui
> >      check /sys/class/thermal/thermal_zone*/type
> >      check /sys/class/thermal/thermal_zone*/temp
> 
> the TEST lines can be removed.
> 
> > 
> > Signed-off-by: Michael Kao <michael.kao at mediatek.com>
> > Signed-off-by: Nicolas Boichat <drinkcat at chromium.org>
> > ---
> 
> Tested-by: Hsin-Yi Wang <hsinyi at chromium.org>
> 
> This removes following error:
> [   10.882325] generic-adc-thermal thermal-sensor1: Thermal zone
> sensor register failed: -19
> [   10.911912] generic-adc-thermal thermal-sensor2: Thermal zone
> sensor register failed: -19
> 
> >  arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 14 ++++++++++++++
> >  arch/arm64/boot/dts/mediatek/mt8183.dtsi       |  2 +-
> >  2 files changed, 15 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> > index bf2ad1294dd3..202acb542b12 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> > @@ -801,6 +801,20 @@
> >         status = "okay";
> >  };
> > 
> > +&thermal_zones {
> > +       Tboard1 {
> > +               polling-delay = <1000>; /* milliseconds */
> > +               polling-delay-passive = <0>; /* milliseconds */
> > +               thermal-sensors = <&tboard_thermistor1>;
> > +       };
> > +
> > +       Tboard2 {
> > +               polling-delay = <1000>; /* milliseconds */
> > +               polling-delay-passive = <0>; /* milliseconds */
> > +               thermal-sensors = <&tboard_thermistor2>;
> > +       };
> > +};
> > +
> >  &u3phy {
> >         status = "okay";
> >  };
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > index 1ad0a1d55d53..f0719dbef249 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> > @@ -673,7 +673,7 @@
> >                         nvmem-cell-names = "calibration-data";
> >                 };
> > 
> > -               thermal-zones {
> > +               thermal_zones: thermal-zones {
> >                         cpu_thermal: cpu_thermal {
> >                                 polling-delay-passive = <100>;
> >                                 polling-delay = <500>;
> > --
> > 2.18.0
> > 


More information about the linux-arm-kernel mailing list