[PATCH 0/4] arm64: dts: rockchip: rk3328: Enable USB3 on some SBCs

[Chen-Yu Tsai]

From: Chen-Yu Tsai <wens at csie.org>

Hi everyone,

Here are some patches that enable USB3 on RK3328 SBCs that I own. The
changes are quite straightforward, except for the NanoPi R2S, which
has a USB3 Ethernet chip attached. I am aware that there's already a
patch [1] for that. This is my spin on things using the USB device
binding, with comments on how the USB ports are arranged, that I had
done but couldn't find the time to send out.

The last patch also results in some warnings from checkpatch.pl:

    WARNING: DT compatible string "usbbda,8153" appears un-documented -- 
	check ./Documentation/devicetree/bindings/
    #88: FILE: arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts:398:
    +               compatible = "usbbda,8153";

    WARNING: DT compatible string vendor "usbbda" appears un-documented -- 
	check ./Documentation/devicetree/bindings/vendor-prefixes.yaml
    #88: FILE: arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts:398:
    +               compatible = "usbbda,8153";

At least the first warning should be covered by the USB device binding

    Documentation/devicetree/bindings/usb/usb-device.yaml

while we probably should add an exception to vendor-prefixes.yaml for
the second warning.

Please let me know what you think.


Regards
ChenYu

[1] https://lore.kernel.org/linux-rockchip/20210405093423.16149-1-cnsztl@gmail.com/


Cameron Nemo (1):
  arm64: dts: rockchip: rk3328: Enable USB3 for Rock64

Chen-Yu Tsai (3):
  arm64: dts: rockchip: rk3328: Enable USB3 for ROC-RK3328-CC
  arm64: dts: rockchip: rk3328: Enable USB3 for Rock Pi E
  arm64: dts: rockchip: rk3328: Enable USB3 Ethernet on NanoPi R2S

 .../boot/dts/rockchip/rk3328-nanopi-r2s.dts   | 32 +++++++++++++++++++
 .../arm64/boot/dts/rockchip/rk3328-roc-cc.dts |  5 +++
 .../boot/dts/rockchip/rk3328-rock-pi-e.dts    |  5 +++
 .../arm64/boot/dts/rockchip/rk3328-rock64.dts |  5 +++
 4 files changed, 47 insertions(+)

-- 
2.31.1