[RESEND PATCH 1/2] arm64: defconfig: Allow mt8173-based boards to boot from usb

[Enric Balletbo i Serra]

Enable the option necessary to boot mt8173-based boards to boot from
usb devices, like its phy and the regulators needed to have proper
support.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo at collabora.com>
---
This is only a resend rebased on top of mainline to fix some trivial
conflicts.

 arch/arm64/configs/defconfig | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index d612f633b771..7b4be3807b6d 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -448,6 +448,7 @@ CONFIG_I2C_GPIO=m
 CONFIG_I2C_IMX=y
 CONFIG_I2C_IMX_LPI2C=y
 CONFIG_I2C_MESON=y
+CONFIG_I2C_MT65XX=y
 CONFIG_I2C_MV64XXX=y
 CONFIG_I2C_OMAP=y
 CONFIG_I2C_OWL=y
@@ -594,6 +595,7 @@ CONFIG_MFD_EXYNOS_LPASS=m
 CONFIG_MFD_HI6421_PMIC=y
 CONFIG_MFD_HI655X_PMIC=y
 CONFIG_MFD_MAX77620=y
+CONFIG_MFD_MT6397=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_RK808=y
 CONFIG_MFD_SEC_CORE=y
@@ -611,6 +613,8 @@ CONFIG_REGULATOR_HI655X=y
 CONFIG_REGULATOR_MAX77620=y
 CONFIG_REGULATOR_MAX8973=y
 CONFIG_REGULATOR_MP8859=y
+CONFIG_REGULATOR_MT6358=y
+CONFIG_REGULATOR_MT6397=y
 CONFIG_REGULATOR_PCA9450=y
 CONFIG_REGULATOR_PF8X00=y
 CONFIG_REGULATOR_PFUZE100=y
@@ -787,6 +791,7 @@ CONFIG_USB_RENESAS_USBHS_HCD=m
 CONFIG_USB_RENESAS_USBHS=m
 CONFIG_USB_ACM=m
 CONFIG_USB_STORAGE=y
+CONFIG_USB_MTU3=y
 CONFIG_USB_MUSB_HDRC=y
 CONFIG_USB_MUSB_SUNXI=y
 CONFIG_USB_DWC3=y
@@ -988,6 +993,7 @@ CONFIG_OWL_PM_DOMAINS=y
 CONFIG_RASPBERRYPI_POWER=y
 CONFIG_FSL_DPAA=y
 CONFIG_FSL_MC_DPIO=y
+CONFIG_MTK_PMIC_WRAP=y
 CONFIG_QCOM_AOSS_QMP=y
 CONFIG_QCOM_COMMAND_DB=y
 CONFIG_QCOM_GENI_SE=y
@@ -1064,6 +1070,7 @@ CONFIG_PHY_HI6220_USB=y
 CONFIG_PHY_HISTB_COMBPHY=y
 CONFIG_PHY_HISI_INNO_USB2=y
 CONFIG_PHY_MVEBU_CP110_COMPHY=y
+CONFIG_PHY_MTK_TPHY=y
 CONFIG_PHY_QCOM_QMP=m
 CONFIG_PHY_QCOM_QUSB2=m
 CONFIG_PHY_QCOM_USB_HS=y
-- 
2.30.2