[PATCH v4 2/3] IB/mthca: Disable parity reporting

[Bjorn Helgaas]

From: Heiner Kallweit <hkallweit1 at gmail.com>

For Mellanox Tavor devices, we previously set dev->broken_parity_status,
which does not change the device's behavior; it merely prevents the EDAC
PCI error reporting from warning about Master Data Parity Error, Signaled
System Error, or Detected Parity Error for this device.

Instead, disable Parity Error Response so the device doesn't report
parity errors in the first place.

[bhelgaas: split out pci_disable_parity(), commit log, keep quirk static]
Link: https://lore.kernel.org/r/d375987c-ea4f-dd98-4ef8-99b2fbfe7c33@gmail.com
---
 drivers/pci/quirks.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 653660e3ba9e..6aa9df411604 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -206,16 +206,11 @@ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
 				PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);
 
 /*
- * The Mellanox Tavor device gives false positive parity errors.  Mark this
- * device with a broken_parity_status to allow PCI scanning code to "skip"
- * this now blacklisted device.
+ * The Mellanox Tavor device gives false positive parity errors.  Disable
+ * parity error reporting.
  */
-static void quirk_mellanox_tavor(struct pci_dev *dev)
-{
-	dev->broken_parity_status = 1;	/* This device gives false positives */
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR, quirk_mellanox_tavor);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE, quirk_mellanox_tavor);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR, pci_disable_parity);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE, pci_disable_parity);
 
 /*
  * Deal with broken BIOSes that neglect to enable passive release,
-- 
2.25.1