[PATCH v3 1/6] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators

[Rob Herring]

On Fri, Mar 26, 2021 at 03:18:59PM -0400, Jim Quinlan wrote:
> Similar to the regulator bindings found in "rockchip-pcie-host.txt", this
> allows optional regulators to be attached and controlled by the PCIe RC
> driver.  That being said, this driver searches in the DT subnode (the EP
> node, eg pci at 0,0) for the regulator property.
> 
> The use of a regulator property in the pcie EP subnode such as
> "vpcie12v-supply" depends on a pending pullreq to the pci-bus.yaml
> file at
> 
> https://github.com/devicetree-org/dt-schema/pull/54
> 
> Signed-off-by: Jim Quinlan <jim2101024 at gmail.com>
> ---
>  Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> index f90557f6deb8..ea3e6f55e365 100644
> --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> @@ -156,5 +156,11 @@ examples:
>                                   <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
>                      brcm,enable-ssc;
>                      brcm,scb-sizes =  <0x0000000080000000 0x0000000080000000>;
> +
> +                    pcie-ep at 0,0 {
> +                            reg = <0x0 0x0 0x0 0x0 0x0>;
> +                            compatible = "pci14e4,1688";
> +                            vpcie12v-supply: <&vreg12>;

For other cases, these properties are in the host bridge node. If these 
are standard PCI rails, then I think that's where they belong unless we 
define slot nodes.

Rob