[PATCH V2 2/4] ARM: dts: stm32: Fill GPIO line names on AV96

[Marek Vasut]

Fill in the custom GPIO line names used by DH.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Alexandre Torgue <alexandre.torgue at foss.st.com>
Cc: Patrice Chotard <patrice.chotard at foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
Cc: linux-stm32 at st-md-mailman.stormreply.com
To: linux-arm-kernel at lists.infradead.org
---
V2: Rename the GPIOs to AV96-n where n is the GPIO-n pin matching
    1.1.5 Low Speed Expansion Connector in
https://raw.githubusercontent.com/96boards/documentation/master/consumer/avenger96/hardware-docs/files/avenger96-hardware-user-manual.pdf
---
 .../boot/dts/stm32mp15xx-dhcor-avenger96.dtsi | 35 +++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
index b09e87fe901a..64dca5b7f748 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -162,6 +162,41 @@ phy0: ethernet-phy at 7 {
 	};
 };
 
+&gpioa {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "AV96-K",
+			  "AV96-I", "", "AV96-A", "";
+};
+
+&gpiob {
+	gpio-line-names = "", "", "", "",
+			  "", "AV96-J", "", "",
+			  "", "", "", "AV96-B",
+			  "", "AV96-L", "", "";
+};
+
+&gpioc {
+	gpio-line-names = "", "", "", "AV96-C",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&gpiod {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "AV96-D", "", "", "",
+			  "", "", "AV96-E", "AV96-F";
+};
+
+&gpiof {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "AV96-G", "AV96-H", "", "";
+};
+
 &i2c1 {	/* X6 I2C1 */
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins_b>;
-- 
2.30.2