[PATCH v5 11/13] arm: dts: mt7629: harmonize node names and compatibles

[Matthias Brugger]

On 16/03/2021 10:22, Chunfeng Yun wrote:
> This is used to fix dtbs_check warning
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>

Applied now to v5.12-next/dts32

> ---
> v2~v5: no changes
> ---
>  arch/arm/boot/dts/mt7629.dtsi | 12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi
> index 5cbb3d244c75..874043f0490d 100644
> --- a/arch/arm/boot/dts/mt7629.dtsi
> +++ b/arch/arm/boot/dts/mt7629.dtsi
> @@ -329,8 +329,9 @@
>  			status = "disabled";
>  		};
>  
> -		u3phy0: usb-phy at 1a0c4000 {
> -			compatible = "mediatek,generic-tphy-v2";
> +		u3phy0: t-phy at 1a0c4000 {
> +			compatible = "mediatek,mt7629-tphy",
> +				     "mediatek,generic-tphy-v2";
>  			#address-cells = <1>;
>  			#size-cells = <1>;
>  			ranges = <0 0x1a0c4000 0xe00>;
> @@ -413,14 +414,15 @@
>  			};
>  		};
>  
> -		pciephy1: pcie-phy at 1a14a000 {
> -			compatible = "mediatek,generic-tphy-v2";
> +		pciephy1: t-phy at 1a14a000 {
> +			compatible = "mediatek,mt7629-tphy",
> +				     "mediatek,generic-tphy-v2";
>  			#address-cells = <1>;
>  			#size-cells = <1>;
>  			ranges = <0 0x1a14a000 0x1000>;
>  			status = "disabled";
>  
> -			pcieport1: port1phy at 0 {
> +			pcieport1: pcie-phy at 0 {
>  				reg = <0 0x1000>;
>  				clocks = <&clk20m>;
>  				clock-names = "ref";
>