[PATCH] arm64: dts: imx8mp-evk: Add PMIC device

Uwe Kleine-König u.kleine-koenig at pengutronix.de
Mon Mar 29 13:34:09 BST 2021


The imx8mp-evk uses an PCA9450C as PMIC that supplies various
regulators.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
Hello,

this is formally v2 of https://lore.kernel.org/r/20210326142459.30679-1-u.kleine-koenig@pengutronix.de
where I claimed there was no binding for the PMIC but Fabio caught me
:-)

Best regards
Uwe

 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 99 ++++++++++++++++++++
 1 file changed, 99 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 7db4273cc88b..3488d7dd14e5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -102,6 +102,92 @@ ethphy1: ethernet-phy at 1 {
 	};
 };
 
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic at 25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <720000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <720000>;
+				regulator-max-microvolt = <1025000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1045000>;
+				regulator-max-microvolt = <1155000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1710000>;
+				regulator-max-microvolt = <1890000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
 &i2c3 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -227,6 +313,13 @@ MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x19
 		>;
 	};
 
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c3
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3
@@ -234,6 +327,12 @@ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3
 		>;
 	};
 
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x000001c0
+		>;
+	};
+
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x41
-- 
2.29.2




More information about the linux-arm-kernel mailing list