[PATCH next] ARM: dts: BCM5301X: Fix Linksys EA9500 partitions

[Rafał Miłecki]

From: Rafał Miłecki <rafal at milecki.pl>

Partitions are basically fixed indeed but firmware ones don't have
hardcoded function ("firmware" vs "failsafe"). Actual function depends
on bootloader configuration. Use a proper binding for that.

While at it fix numbers formatting to avoid:
arch/arm/boot/dts/bcm47094-linksys-panamera.dt.yaml: partitions: 'partition at 1F00000' does not match any of the regexes: '^partition@[0-9a-f]+$', 'pinctrl-[0-9]+'
        From schema: Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml

Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
 arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 1dc0cb0fae22..8b77efd2224e 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -279,7 +279,7 @@ &usb3_phy {
 
 &nandcs {
 	partitions {
-		compatible = "fixed-partitions";
+		compatible = "linksys,ns-partitions";
 		#address-cells = <1>;
 		#size-cells = <1>;
 
@@ -300,20 +300,18 @@ partition at 180000{
 		};
 
 		partition at 200000 {
-			label = "firmware";
-			reg = <0x0200000 0x01D00000>;
-			compatible = "brcm,trx";
+			reg = <0x0200000 0x01d00000>;
+			compatible = "linksys,ns-firmware", "brcm,trx";
 		};
 
-		partition at 1F00000 {
-			label = "failsafe";
-			reg = <0x01F00000 0x01D00000>;
-			read-only;
+		partition at 1f00000 {
+			reg = <0x01f00000 0x01d00000>;
+			compatible = "linksys,ns-firmware", "brcm,trx";
 		};
 
 		partition at 5200000 {
 			label = "system";
-			reg = <0x05200000 0x02E00000>;
+			reg = <0x05200000 0x02e00000>;
 		};
 	};
 };
-- 
2.26.2