[PATCH v6 09/11] dt-bindings: power: rockchip: Convert to json-schema
Johan Jonker
jbx6244 at gmail.com
Fri Mar 26 11:43:26 GMT 2021
Hi Elaine,
You've changed the license ones again.
Could someone advise about GPL2.0 and legal stuff here?
On 3/26/21 11:30 AM, Elaine Zhang wrote:
> Convert the soc/rockchip/power_domain.txt binding document to
> json-schema and move to the power bindings directory.
>
> Signed-off-by: Elaine Zhang <zhangqing at rock-chips.com>
> From: Enric Balletbo i Serra <enric.balletbo at collabora.com>
Is this the correct position for that?
> Link:https://patchwork.kernel.org/project/linux-rockchip/patch/20210225102643.653095-1-enric.balletbo@collabora.com/
Normally the original author of a patch should be honored with help of
this command below:
git commit --amend --author="Enric Balletbo i Serra
<enric.balletbo at collabora.com>"
This places a "From: ...." on top of the commit message.
But this is still a conversion/restyle to YAML.
Meanwhile various other authors in the past have made
contributions/comments to this document as well that was GPL2.0 only at
the time.
(I'm just saying: Claiming to be the only author sounds a bit strange here)
Johan
> ---
> .../power/rockchip,power-controller.yaml | 291 ++++++++++++++++++
> .../bindings/soc/rockchip/power_domain.txt | 136 --------
> 2 files changed, 291 insertions(+), 136 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
> delete mode 100644 Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
>
> diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
> new file mode 100644
> index 000000000000..9fec9e227432
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
> @@ -0,0 +1,291 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
This is a conversion of an excising document.
When distributing derived works, the source code of the work must be
made available under the same license.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/rockchip,power-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip Power Domains
> +
> +maintainers:
> + - Elaine Zhang <zhangqing at rock-chips.com>
> + - Heiko Stuebner <heiko at sntech.de>
> +
> +description: |
> + Rockchip processors include support for multiple power domains which can be
> + powered up/down by software based on different application scenarios to save power.
> +
> + Power domains contained within power-controller node are generic power domain
> + providers documented in Documentation/devicetree/bindings/power/power-domain.yaml.
> +
> + IP cores belonging to a power domain should contain a "power-domains"
> + property that is a phandle for the power domain node representing the domain.
> +
> +properties:
> + $nodename:
> + const: power-controller
> +
> + compatible:
> + enum:
> + - rockchip,px30-power-controller
> + - rockchip,rk3036-power-controller
> + - rockchip,rk3066-power-controller
> + - rockchip,rk3128-power-controller
> + - rockchip,rk3188-power-controller
> + - rockchip,rk3228-power-controller
> + - rockchip,rk3288-power-controller
> + - rockchip,rk3328-power-controller
> + - rockchip,rk3366-power-controller
> + - rockchip,rk3368-power-controller
> + - rockchip,rk3399-power-controller
> +
> + "#power-domain-cells":
> + const: 1
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + clocks: true
> +
> + assigned-clocks:
> + minItems: 1
> +
> + assigned-clock-parents:
> + minItems: 1
> +
> +patternProperties:
> + "^power-domain@[0-9a-f]+$":
> + type: object
> + description: |
> + Represents the power domains within the power controller node as documented
> + in Documentation/devicetree/bindings/power/power-domain.yaml.
> +
> + properties:
> +
> + "#power-domain-cells":
> + description:
> + Must be 0 for nodes representing a single PM domain and 1 for nodes
> + providing multiple PM domains.
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + reg:
> + maxItems: 1
> + description: |
> + Power domain index. Valid values are defined in
> + "include/dt-bindings/power/px30-power.h"
> + "include/dt-bindings/power/rk3036-power.h"
> + "include/dt-bindings/power/rk3066-power.h"
> + "include/dt-bindings/power/rk3128-power.h"
> + "include/dt-bindings/power/rk3188-power.h"
> + "include/dt-bindings/power/rk3228-power.h"
> + "include/dt-bindings/power/rk3288-power.h"
> + "include/dt-bindings/power/rk3328-power.h"
> + "include/dt-bindings/power/rk3366-power.h"
> + "include/dt-bindings/power/rk3368-power.h"
> + "include/dt-bindings/power/rk3399-power.h"
> +
> + clocks:
> + description: |
> + A number of phandles to clocks that need to be enabled while power domain
> + switches state.
> +
> + pm_qos:
> + description: |
> + A number of phandles to qos blocks which need to be saved and restored
> + while power domain switches state.
> +
> + patternProperties:
> + "^power-domain@[0-9a-f]+$":
> + type: object
> + description: |
> + Represents a power domain child within a power domain parent node.
> +
> + properties:
> +
> + "#power-domain-cells":
> + description:
> + Must be 0 for nodes representing a single PM domain and 1 for nodes
> + providing multiple PM domains.
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + A number of phandles to clocks that need to be enabled while power domain
> + switches state.
> +
> + pm_qos:
> + description: |
> + A number of phandles to qos blocks which need to be saved and restored
> + while power domain switches state.
> +
> + patternProperties:
> + "^power-domain@[0-9a-f]+$":
> + type: object
> + description: |
> + Represents a power domain child within a power domain parent node.
> +
> + properties:
> +
> + "#power-domain-cells":
> + description:
> + Must be 0 for nodes representing a single PM domain and 1 for nodes
> + providing multiple PM domains.
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + A number of phandles to clocks that need to be enabled while power domain
> + switches state.
> +
> + pm_qos:
> + description: |
> + A number of phandles to qos blocks which need to be saved and restored
> + while power domain switches state.
> +
> + required:
> + - reg
> +
> + additionalProperties: false
> +
> + required:
> + - reg
> +
> + additionalProperties: false
> +
> + required:
> + - reg
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - "#power-domain-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/rk3399-cru.h>
> + #include <dt-bindings/power/rk3399-power.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + qos_hdcp: qos at ffa90000 {
> + compatible = "rockchip,rk3399-qos", "syscon";
> + reg = <0x0 0xffa90000 0x0 0x20>;
> + };
> +
> + qos_iep: qos at ffa98000 {
> + compatible = "rockchip,rk3399-qos", "syscon";
> + reg = <0x0 0xffa98000 0x0 0x20>;
> + };
> +
> + qos_rga_r: qos at ffab0000 {
> + compatible = "rockchip,rk3399-qos", "syscon";
> + reg = <0x0 0xffab0000 0x0 0x20>;
> + };
> +
> + qos_rga_w: qos at ffab0080 {
> + compatible = "rockchip,rk3399-qos", "syscon";
> + reg = <0x0 0xffab0080 0x0 0x20>;
> + };
> +
> + qos_video_m0: qos at ffab8000 {
> + compatible = "rockchip,rk3399-qos", "syscon";
> + reg = <0x0 0xffab8000 0x0 0x20>;
> + };
> +
> + qos_video_m1_r: qos at ffac0000 {
> + compatible = "rockchip,rk3399-qos", "syscon";
> + reg = <0x0 0xffac0000 0x0 0x20>;
> + };
> +
> + qos_video_m1_w: qos at ffac0080 {
> + compatible = "rockchip,rk3399-qos", "syscon";
> + reg = <0x0 0xffac0080 0x0 0x20>;
> + };
> +
> + power-management at ff310000 {
> + compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
> + reg = <0x0 0xff310000 0x0 0x1000>;
> +
> + power-controller {
> + compatible = "rockchip,rk3399-power-controller";
> + #power-domain-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* These power domains are grouped by VD_CENTER */
> + power-domain at RK3399_PD_IEP {
> + reg = <RK3399_PD_IEP>;
> + clocks = <&cru ACLK_IEP>,
> + <&cru HCLK_IEP>;
> + pm_qos = <&qos_iep>;
> + #power-domain-cells = <0>;
> + };
> + power-domain at RK3399_PD_RGA {
> + reg = <RK3399_PD_RGA>;
> + clocks = <&cru ACLK_RGA>,
> + <&cru HCLK_RGA>;
> + pm_qos = <&qos_rga_r>,
> + <&qos_rga_w>;
> + #power-domain-cells = <0>;
> + };
> + power-domain at RK3399_PD_VCODEC {
> + reg = <RK3399_PD_VCODEC>;
> + clocks = <&cru ACLK_VCODEC>,
> + <&cru HCLK_VCODEC>;
> + pm_qos = <&qos_video_m0>;
> + #power-domain-cells = <0>;
> + };
> + power-domain at RK3399_PD_VDU {
> + reg = <RK3399_PD_VDU>;
> + clocks = <&cru ACLK_VDU>,
> + <&cru HCLK_VDU>;
> + pm_qos = <&qos_video_m1_r>,
> + <&qos_video_m1_w>;
> + #power-domain-cells = <0>;
> + };
> + power-domain at RK3399_PD_VIO {
> + reg = <RK3399_PD_VIO>;
> + #power-domain-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + power-domain at RK3399_PD_HDCP {
> + reg = <RK3399_PD_HDCP>;
> + clocks = <&cru ACLK_HDCP>,
> + <&cru HCLK_HDCP>,
> + <&cru PCLK_HDCP>;
> + pm_qos = <&qos_hdcp>;
> + #power-domain-cells = <0>;
> + };
> + };
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
> deleted file mode 100644
> index 8304eceb62e4..000000000000
> --- a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
> +++ /dev/null
> @@ -1,136 +0,0 @@
> -* Rockchip Power Domains
> -
> -Rockchip processors include support for multiple power domains which can be
> -powered up/down by software based on different application scenes to save power.
> -
> -Required properties for power domain controller:
> -- compatible: Should be one of the following.
> - "rockchip,px30-power-controller" - for PX30 SoCs.
> - "rockchip,rk3036-power-controller" - for RK3036 SoCs.
> - "rockchip,rk3066-power-controller" - for RK3066 SoCs.
> - "rockchip,rk3128-power-controller" - for RK3128 SoCs.
> - "rockchip,rk3188-power-controller" - for RK3188 SoCs.
> - "rockchip,rk3228-power-controller" - for RK3228 SoCs.
> - "rockchip,rk3288-power-controller" - for RK3288 SoCs.
> - "rockchip,rk3328-power-controller" - for RK3328 SoCs.
> - "rockchip,rk3366-power-controller" - for RK3366 SoCs.
> - "rockchip,rk3368-power-controller" - for RK3368 SoCs.
> - "rockchip,rk3399-power-controller" - for RK3399 SoCs.
> -- #power-domain-cells: Number of cells in a power-domain specifier.
> - Should be 1 for multiple PM domains.
> -- #address-cells: Should be 1.
> -- #size-cells: Should be 0.
> -
> -Required properties for power domain sub nodes:
> -- reg: index of the power domain, should use macros in:
> - "include/dt-bindings/power/px30-power.h" - for PX30 type power domain.
> - "include/dt-bindings/power/rk3036-power.h" - for RK3036 type power domain.
> - "include/dt-bindings/power/rk3066-power.h" - for RK3066 type power domain.
> - "include/dt-bindings/power/rk3128-power.h" - for RK3128 type power domain.
> - "include/dt-bindings/power/rk3188-power.h" - for RK3188 type power domain.
> - "include/dt-bindings/power/rk3228-power.h" - for RK3228 type power domain.
> - "include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
> - "include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain.
> - "include/dt-bindings/power/rk3366-power.h" - for RK3366 type power domain.
> - "include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain.
> - "include/dt-bindings/power/rk3399-power.h" - for RK3399 type power domain.
> -- clocks (optional): phandles to clocks which need to be enabled while power domain
> - switches state.
> -- pm_qos (optional): phandles to qos blocks which need to be saved and restored
> - while power domain switches state.
> -
> -Qos Example:
> -
> - qos_gpu: qos_gpu at ffaf0000 {
> - compatible ="syscon";
> - reg = <0x0 0xffaf0000 0x0 0x20>;
> - };
> -
> -Example:
> -
> - power: power-controller {
> - compatible = "rockchip,rk3288-power-controller";
> - #power-domain-cells = <1>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - pd_gpu {
> - reg = <RK3288_PD_GPU>;
> - clocks = <&cru ACLK_GPU>;
> - pm_qos = <&qos_gpu>;
> - };
> - };
> -
> - power: power-controller {
> - compatible = "rockchip,rk3368-power-controller";
> - #power-domain-cells = <1>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - pd_gpu_1 {
> - reg = <RK3368_PD_GPU_1>;
> - clocks = <&cru ACLK_GPU_CFG>;
> - };
> - };
> -
> -Example 2:
> - power: power-controller {
> - compatible = "rockchip,rk3399-power-controller";
> - #power-domain-cells = <1>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - pd_vio {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - reg = <RK3399_PD_VIO>;
> -
> - pd_vo {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - reg = <RK3399_PD_VO>;
> -
> - pd_vopb {
> - reg = <RK3399_PD_VOPB>;
> - };
> -
> - pd_vopl {
> - reg = <RK3399_PD_VOPL>;
> - };
> - };
> - };
> - };
> -
> -Node of a device using power domains must have a power-domains property,
> -containing a phandle to the power device node and an index specifying which
> -power domain to use.
> -The index should use macros in:
> - "include/dt-bindings/power/px30-power.h" - for px30 type power domain.
> - "include/dt-bindings/power/rk3036-power.h" - for rk3036 type power domain.
> - "include/dt-bindings/power/rk3128-power.h" - for rk3128 type power domain.
> - "include/dt-bindings/power/rk3128-power.h" - for rk3228 type power domain.
> - "include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
> - "include/dt-bindings/power/rk3328-power.h" - for rk3328 type power domain.
> - "include/dt-bindings/power/rk3366-power.h" - for rk3366 type power domain.
> - "include/dt-bindings/power/rk3368-power.h" - for rk3368 type power domain.
> - "include/dt-bindings/power/rk3399-power.h" - for rk3399 type power domain.
> -
> -Example of the node using power domain:
> -
> - node {
> - /* ... */
> - power-domains = <&power RK3288_PD_GPU>;
> - /* ... */
> - };
> -
> - node {
> - /* ... */
> - power-domains = <&power RK3368_PD_GPU_1>;
> - /* ... */
> - };
> -
> - node {
> - /* ... */
> - power-domains = <&power RK3399_PD_VOPB>;
> - /* ... */
> - };
>
More information about the linux-arm-kernel
mailing list