[PATCH v6 4/9] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750
dillon.minfei at gmail.com
dillon.minfei at gmail.com
Fri Mar 26 11:14:57 GMT 2021
From: dillon min <dillon.minfei at gmail.com>
This patch is intend to add support stm32h750 value line,
just add stm32h7-pinctrl.dtsi for extending, with following changes:
- rename stm32h743-pinctrl.dtsi to stm32h7-pinctrl.dtsi
- move compatible string "st,stm32h743-pinctrl" from stm32h7-pinctrl.dtsi
to stm32h743-pinctrl.dtsi
- move 'pin-controller' from stm32h7-pinctrl.dtsi to stm32h743.dtsi, to
fix make dtbs_check warrnings
arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: soc: 'i2c at 40005C00',
'i2c at 58001C00' do not match any of the regexes:
'@(0|[1-9a-f][0-9a-f]*)$', '^[^@]+$', 'pinctrl-[0-9]+'
Signed-off-by: dillon min <dillon.minfei at gmail.com>
---
v6:
- add gpiox{gpio-ranges, ngpios} in stm32h7-pinctrl.dtsi
- add status="disabled" in stm32h743.dtsi
arch/arm/boot/dts/stm32h7-pinctrl.dtsi | 341 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 307 +---------------------------
2 files changed, 347 insertions(+), 301 deletions(-)
create mode 100644 arch/arm/boot/dts/stm32h7-pinctrl.dtsi
diff --git a/arch/arm/boot/dts/stm32h7-pinctrl.dtsi b/arch/arm/boot/dts/stm32h7-pinctrl.dtsi
new file mode 100644
index 000000000000..a5c295eca081
--- /dev/null
+++ b/arch/arm/boot/dts/stm32h7-pinctrl.dtsi
@@ -0,0 +1,341 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue at st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&pinctrl {
+
+ gpioa: gpio at 58020000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio at 58020400 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio at 58020800 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio at 58020c00 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio at 58021000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio at 58021400 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio at 58021800 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio at 58021c00 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio at 58022000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 128 16>;
+ };
+
+ gpioj: gpio at 58022400 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 144 16>;
+ };
+
+ gpiok: gpio at 58022800 {
+ status = "okay";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl 0 160 8>;
+ };
+
+ i2c1_pins_a: i2c1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
+ <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ ethernet_rmii: rmii-0 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 11, AF11)>,
+ <STM32_PINMUX('G', 13, AF11)>,
+ <STM32_PINMUX('G', 12, AF11)>,
+ <STM32_PINMUX('C', 4, AF11)>,
+ <STM32_PINMUX('C', 5, AF11)>,
+ <STM32_PINMUX('A', 7, AF11)>,
+ <STM32_PINMUX('C', 1, AF11)>,
+ <STM32_PINMUX('A', 2, AF11)>,
+ <STM32_PINMUX('A', 1, AF11)>;
+ slew-rate = <2>;
+ };
+ };
+
+ sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2{
+ pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <3>;
+ drive-open-drain;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+ };
+ };
+
+ sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('D', 6, AF11)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 7, AF11)>; /* SDMMC1_CMD */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('D', 6, AF11)>; /* SDMMC1_CK */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2{
+ pinmux = <STM32_PINMUX('D', 7, AF11)>; /* SDMMC1_CMD */
+ slew-rate = <3>;
+ drive-open-drain;
+ bias-disable;
+ };
+ };
+
+ sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('D', 6, ANALOG)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 7, ANALOG)>; /* SDMMC1_CMD */
+ };
+ };
+
+ sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2{
+ pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */
+ bias-pull-up;
+ };
+ };
+
+ sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+ <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */
+ };
+ };
+
+ usart1_pins: usart1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 15, AF4)>; /* USART1_RX */
+ bias-disable;
+ };
+ };
+
+ usart2_pins: usart2-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
+ bias-disable;
+ };
+ };
+
+ usart3_pins: usart3-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+ <STM32_PINMUX('D', 12, AF7)>; /* USART3_RTS_DE */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 11, AF7)>, /* USART3_RX */
+ <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
+ bias-disable;
+ };
+ };
+
+ uart4_pins: uart4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('A', 0, AF8)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('I', 9, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ usbotg_hs_pins_a: usbotg-hs-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 4, AF10)>, /* ULPI_NXT */
+ <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
+ <STM32_PINMUX('C', 0, AF10)>, /* ULPI_STP> */
+ <STM32_PINMUX('A', 5, AF10)>, /* ULPI_CK> */
+ <STM32_PINMUX('A', 3, AF10)>, /* ULPI_D0> */
+ <STM32_PINMUX('B', 0, AF10)>, /* ULPI_D1> */
+ <STM32_PINMUX('B', 1, AF10)>, /* ULPI_D2> */
+ <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */
+ <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */
+ <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */
+ <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */
+ <STM32_PINMUX('B', 5, AF10)>; /* ULPI_D7> */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
+
+ spi1_pins: spi1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('A', 5, AF5)>,
+ /* SPI1_CLK */
+ <STM32_PINMUX('B', 5, AF5)>;
+ /* SPI1_MOSI */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('G', 9, AF5)>;
+ /* SPI1_MISO */
+ bias-disable;
+ };
+ };
+};
+
diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
index fa5dcb6a5fdd..6b1e115307b9 100644
--- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
@@ -1,306 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright 2017 - Alexandre Torgue <alexandre.torgue at st.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue at st.com> for STMicroelectronics.
*/
-#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+#include "stm32h7-pinctrl.dtsi"
-/ {
- soc {
- pin-controller {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,stm32h743-pinctrl";
- ranges = <0 0x58020000 0x3000>;
- interrupt-parent = <&exti>;
- st,syscfg = <&syscfg 0x8>;
- pins-are-numbered;
-
- gpioa: gpio at 58020000 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x0 0x400>;
- clocks = <&rcc GPIOA_CK>;
- st,bank-name = "GPIOA";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpiob: gpio at 58020400 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x400 0x400>;
- clocks = <&rcc GPIOB_CK>;
- st,bank-name = "GPIOB";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpioc: gpio at 58020800 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x800 0x400>;
- clocks = <&rcc GPIOC_CK>;
- st,bank-name = "GPIOC";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpiod: gpio at 58020c00 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0xc00 0x400>;
- clocks = <&rcc GPIOD_CK>;
- st,bank-name = "GPIOD";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpioe: gpio at 58021000 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x1000 0x400>;
- clocks = <&rcc GPIOE_CK>;
- st,bank-name = "GPIOE";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpiof: gpio at 58021400 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x1400 0x400>;
- clocks = <&rcc GPIOF_CK>;
- st,bank-name = "GPIOF";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpiog: gpio at 58021800 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x1800 0x400>;
- clocks = <&rcc GPIOG_CK>;
- st,bank-name = "GPIOG";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpioh: gpio at 58021c00 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x1c00 0x400>;
- clocks = <&rcc GPIOH_CK>;
- st,bank-name = "GPIOH";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpioi: gpio at 58022000 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x2000 0x400>;
- clocks = <&rcc GPIOI_CK>;
- st,bank-name = "GPIOI";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpioj: gpio at 58022400 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x2400 0x400>;
- clocks = <&rcc GPIOJ_CK>;
- st,bank-name = "GPIOJ";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpiok: gpio at 58022800 {
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x2800 0x400>;
- clocks = <&rcc GPIOK_CK>;
- st,bank-name = "GPIOK";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- i2c1_pins_a: i2c1-0 {
- pins {
- pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
- <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- ethernet_rmii: rmii-0 {
- pins {
- pinmux = <STM32_PINMUX('G', 11, AF11)>,
- <STM32_PINMUX('G', 13, AF11)>,
- <STM32_PINMUX('G', 12, AF11)>,
- <STM32_PINMUX('C', 4, AF11)>,
- <STM32_PINMUX('C', 5, AF11)>,
- <STM32_PINMUX('A', 7, AF11)>,
- <STM32_PINMUX('C', 1, AF11)>,
- <STM32_PINMUX('A', 2, AF11)>,
- <STM32_PINMUX('A', 1, AF11)>;
- slew-rate = <2>;
- };
- };
-
- sdmmc1_b4_pins_a: sdmmc1-b4-0 {
- pins {
- pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
- <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
- <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
- <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
- <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
- <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
- slew-rate = <3>;
- drive-push-pull;
- bias-disable;
- };
- };
-
- sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
- pins1 {
- pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
- <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
- <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
- <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
- <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
- slew-rate = <3>;
- drive-push-pull;
- bias-disable;
- };
- pins2{
- pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
- slew-rate = <3>;
- drive-open-drain;
- bias-disable;
- };
- };
-
- sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
- <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
- <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
- <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
- <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
- <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
- };
- };
-
- sdmmc1_dir_pins_a: sdmmc1-dir-0 {
- pins1 {
- pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */
- <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
- <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */
- slew-rate = <3>;
- drive-push-pull;
- bias-pull-up;
- };
- pins2{
- pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */
- bias-pull-up;
- };
- };
-
- sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */
- <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
- <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
- <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */
- };
- };
-
- usart1_pins: usart1-0 {
- pins1 {
- pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('B', 15, AF4)>; /* USART1_RX */
- bias-disable;
- };
- };
-
- usart2_pins: usart2-0 {
- pins1 {
- pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
- bias-disable;
- };
- };
-
- usbotg_hs_pins_a: usbotg-hs-0 {
- pins {
- pinmux = <STM32_PINMUX('H', 4, AF10)>, /* ULPI_NXT */
- <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
- <STM32_PINMUX('C', 0, AF10)>, /* ULPI_STP> */
- <STM32_PINMUX('A', 5, AF10)>, /* ULPI_CK> */
- <STM32_PINMUX('A', 3, AF10)>, /* ULPI_D0> */
- <STM32_PINMUX('B', 0, AF10)>, /* ULPI_D1> */
- <STM32_PINMUX('B', 1, AF10)>, /* ULPI_D2> */
- <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */
- <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */
- <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */
- <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */
- <STM32_PINMUX('B', 5, AF10)>; /* ULPI_D7> */
- bias-disable;
- drive-push-pull;
- slew-rate = <2>;
- };
- };
- };
- };
+&pinctrl{
+ compatible = "st,stm32h743-pinctrl";
};
--
2.7.4
More information about the linux-arm-kernel
mailing list