[PATCH 1/6] dt-bindings: PCI: ti, am65: Add PCIe host mode dt-bindings for TI's AM65 SoC

[Kishon Vijay Abraham I]

Add PCIe host mode dt-bindings for TI's AM65 SoC.

Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
---
 .../bindings/pci/ti,am65-pci-host.yaml        | 111 ++++++++++++++++++
 1 file changed, 111 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml

diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
new file mode 100644
index 000000000000..b77e492886fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/ti,am65-pci-host.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI AM65 PCI Host
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon at ti.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,am654-pcie-rc
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: app
+      - const: dbics
+      - const: config
+      - const: atu
+
+  power-domains:
+    maxItems: 1
+
+  ti,syscon-pcie-id:
+    description: Phandle to the SYSCON entry required for getting PCIe device/vendor ID
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  ti,syscon-pcie-mode:
+    description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  msi-map: true
+
+  dma-coherent: true
+
+patternProperties:
+  "interrupt-controller":
+    type: object
+    description: interrupt controller to handle legacy interrupts.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - max-link-speed
+  - num-lanes
+  - power-domains
+  - ti,syscon-pcie-id
+  - ti,syscon-pcie-mode
+  - msi-map
+  - ranges
+  - reset-gpios
+  - phys
+  - phy-names
+  - dma-coherent
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie0_rc: pcie at 5500000 {
+                compatible = "ti,am654-pcie-rc";
+                reg =  <0x0 0x5500000 0x0 0x1000>,
+                       <0x0 0x5501000 0x0 0x1000>,
+                       <0x0 0x10000000 0x0 0x2000>,
+                       <0x0 0x5506000 0x0 0x1000>;
+                reg-names = "app", "dbics", "config", "atu";
+                power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+                #address-cells = <3>;
+                #size-cells = <2>;
+                ranges = <0x81000000 0 0          0x0 0x10020000 0 0x00010000>,
+                         <0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>;
+                ti,syscon-pcie-id = <&pcie_devid>;
+                ti,syscon-pcie-mode = <&pcie0_mode>;
+                bus-range = <0x0 0xff>;
+                num-viewport = <16>;
+                max-link-speed = <2>;
+                dma-coherent;
+                interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+                msi-map = <0x0 &gic_its 0x0 0x10000>;
+                #interrupt-cells = <1>;
+                interrupt-map-mask = <0 0 0 7>;
+                interrupt-map = <0 0 0 1 &pcie0_intc 0>, /* INT A */
+                                <0 0 0 2 &pcie0_intc 0>, /* INT B */
+                                <0 0 0 3 &pcie0_intc 0>, /* INT C */
+                                <0 0 0 4 &pcie0_intc 0>; /* INT D */
+
+                pcie0_intc: interrupt-controller {
+                        interrupt-controller;
+                        #interrupt-cells = <1>;
+                        interrupt-parent = <&gic500>;
+                        interrupts = <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>;
+                };
+        };
-- 
2.17.1