[PATCH v3 2/3] dt-bindings: power: rockchip: Convert to json-schema and extend
Johan Jonker
jbx6244 at gmail.com
Wed Mar 24 06:39:49 GMT 2021
On 3/24/21 4:23 AM, Elaine Zhang wrote:
> Convert the soc/rockchip/power_domain.txt binding document to
> json-schema and move to the power bindings directory.
> Add RK3568 SoCs for rockchip power binding document.
>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo at collabora.com>
> Signed-off-by: Elaine Zhang <zhangqing at rock-chips.com>
> ---
> .../power/rockchip,power-controller.yaml | 286 ++++++++++++++++++
> .../bindings/soc/rockchip/power_domain.txt | 136 ---------
> 2 files changed, 286 insertions(+), 136 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
> delete mode 100644 Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
>
> diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
> new file mode 100644
> index 000000000000..0d6b8962d098
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
> @@ -0,0 +1,286 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/rockchip,power-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip Power Domains
> +
> +maintainers:
> + - Elaine Zhang <zhangqing at rock-chips.com>
> + - Rob Herring <robh+dt at kernel.org>
> + - Heiko Stuebner <heiko at sntech.de>
> +
> +description: |
> + Rockchip processors include support for multiple power domains which can be
> + powered up/down by software based on different application scenes to save power.
scenes > scenarios ??
This is not a theater.
=====
Scenes:
1. Something seen by a viewer; a view or prospect.
2. The place where an action or event occurs: the scene of the crime.
=====
Scenarios:
1. An expected or supposed situation or sequence of events
> +
> + Power domains contained within power-controller node are generic power domain
> + providers documented in Documentation/devicetree/bindings/power/power-domain.yaml.
> +
> + IP cores belonging to a power domain should contain a 'power-domains'
> + property that is a phandle for the power domain node representing the domain.
> +
> +properties:
> + $nodename:
> + const: power-controller
> +
> + compatible:
> + enum:
> + - rockchip,px30-power-controller
> + - rockchip,rk3036-power-controller
> + - rockchip,rk3066-power-controller
> + - rockchip,rk3128-power-controller
> + - rockchip,rk3188-power-controller
> + - rockchip,rk3228-power-controller
> + - rockchip,rk3288-power-controller
> + - rockchip,rk3328-power-controller
> + - rockchip,rk3366-power-controller
> + - rockchip,rk3368-power-controller
> + - rockchip,rk3399-power-controller
> + - rockchip,rk3568-power-controller
Use separate patches for a YAML conversion and adding new compatibility
strings. One action per patch.
> +
> + '#power-domain-cells':
> + const: 1
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> +patternProperties:
> + "^pd_[0-9a-z_]{2,10}@[0-9a-f]+$":
Here you are using "", but elsewhere in this document '' is used.
Change all to "".
> + type: object
> + description: |
> + Represents the power domains within the power controller node as documented
> + in Documentation/devicetree/bindings/power/power-domain.yaml.
> +
> + properties:
> +
> + '#power-domain-cells':
> + description:
> + Must be 0 for nodes representing a single PM domain and 1 for nodes
> + providing multiple PM domains.
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + reg:
> + maxItems: 1
> + description: |
> + Power domain index. Valid values are defined in:
remove ":"
> + "include/dt-bindings/power/px30-power.h"
> + "include/dt-bindings/power/rk3036-power.h"
> + "include/dt-bindings/power/rk3066-power.h"
> + "include/dt-bindings/power/rk3128-power.h"
> + "include/dt-bindings/power/rk3188-power.h"
> + "include/dt-bindings/power/rk3228-power.h"
> + "include/dt-bindings/power/rk3288-power.h"
> + "include/dt-bindings/power/rk3328-power.h"
> + "include/dt-bindings/power/rk3366-power.h"
> + "include/dt-bindings/power/rk3368-power.h"
> + "include/dt-bindings/power/rk3399-power.h"
> + "include/dt-bindings/power/rk3399-power.h"
rk3399 > rk3568
"include/dt-bindings/power/rk3568-power.h"
Use separate patches for a YAML conversion and adding new compatibility
strings. One action per patch.
> +
> + clocks:
> + description: |
> + A number of phandles to clocks that need to be enabled while power domain
> + switches state.
> +
> + pm_qos:
> + description: |
> + A number of phandles to qos blocks which need to be saved and restored
> + while power domain switches state.
> +
> + patternProperties:
> + "^pd_[0-9a-z_]{2,10}@[0-9a-f]+$":
> + type: object
> + description: |
> + Represents a power domain child within a power domain parent node.
> +
> + properties:
> +
> + '#power-domain-cells':
> + description:
> + Must be 0 for nodes representing a single PM domain and 1 for nodes
> + providing multiple PM domains.
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + A number of phandles to clocks that need to be enabled while power domain
> + switches state.
> +
> + pm_qos:
> + description: |
> + A number of phandles to qos blocks which need to be saved and restored
> + while power domain switches state.
> +
> + patternProperties:
> + "^pd_[0-9a-z_]{2,10}@[0-9a-f]+$":
> + type: object
> + description: |
> + Represents a power domain child within a power domain parent node.
> +
> + properties:
> +
> + '#power-domain-cells':
> + description:
> + Must be 0 for nodes representing a single PM domain and 1 for nodes
> + providing multiple PM domains.
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + A number of phandles to clocks that need to be enabled while power domain
> + switches state.
> +
> + pm_qos:
> + description: |
> + A number of phandles to qos blocks which need to be saved and restored
> + while power domain switches state.
> +
> + required:
> + - reg
> +
> + additionalProperties: false
> +
> + required:
> + - reg
> +
> + additionalProperties: false
> +
> + required:
> + - reg
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - '#power-domain-cells'
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/rk3399-cru.h>
> + #include <dt-bindings/power/rk3399-power.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + qos_hdcp: qos at ffa90000 {
> + compatible = "rockchip,rk3399-qos", "syscon";
> + reg = <0x0 0xffa90000 0x0 0x20>;
> + };
> +
> + qos_iep: qos at ffa98000 {
> + compatible = "rockchip,rk3399-qos", "syscon";
> + reg = <0x0 0xffa98000 0x0 0x20>;
> + };
> +
> + qos_rga_r: qos at ffab0000 {
> + compatible = "rockchip,rk3399-qos", "syscon";
> + reg = <0x0 0xffab0000 0x0 0x20>;
> + };
> +
> + qos_rga_w: qos at ffab0080 {
> + compatible = "rockchip,rk3399-qos", "syscon";
> + reg = <0x0 0xffab0080 0x0 0x20>;
> + };
> +
> + qos_video_m0: qos at ffab8000 {
> + compatible = "rockchip,rk3399-qos", "syscon";
> + reg = <0x0 0xffab8000 0x0 0x20>;
> + };
> +
> + qos_video_m1_r: qos at ffac0000 {
> + compatible = "rockchip,rk3399-qos", "syscon";
> + reg = <0x0 0xffac0000 0x0 0x20>;
> + };
> +
> + qos_video_m1_w: qos at ffac0080 {
> + compatible = "rockchip,rk3399-qos", "syscon";
> + reg = <0x0 0xffac0080 0x0 0x20>;
> + };
> +
> + power-management at ff310000 {
> + compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
> + reg = <0x0 0xff310000 0x0 0x1000>;
> +
> + power-controller {
> + compatible = "rockchip,rk3399-power-controller";
> + #power-domain-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* These power domains are grouped by VD_CENTER */
> + pd_iep at RK3399_PD_IEP {
> + reg = <RK3399_PD_IEP>;
> + clocks = <&cru ACLK_IEP>,
> + <&cru HCLK_IEP>;
> + pm_qos = <&qos_iep>;
> + #power-domain-cells = <0>;
> + };
> + pd_rga at RK3399_PD_RGA {
> + reg = <RK3399_PD_RGA>;
> + clocks = <&cru ACLK_RGA>,
> + <&cru HCLK_RGA>;
> + pm_qos = <&qos_rga_r>,
> + <&qos_rga_w>;
> + #power-domain-cells = <0>;
> + };
> + pd_vcodec at RK3399_PD_VCODEC {
> + reg = <RK3399_PD_VCODEC>;
> + clocks = <&cru ACLK_VCODEC>,
> + <&cru HCLK_VCODEC>;
> + pm_qos = <&qos_video_m0>;
> + #power-domain-cells = <0>;
> + };
> + pd_vdu at RK3399_PD_VDU {
> + reg = <RK3399_PD_VDU>;
> + clocks = <&cru ACLK_VDU>,
> + <&cru HCLK_VDU>;
> + pm_qos = <&qos_video_m1_r>,
> + <&qos_video_m1_w>;
> + #power-domain-cells = <0>;
> + };
> + pd_vio at RK3399_PD_VIO {
> + reg = <RK3399_PD_VIO>;
> + #power-domain-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pd_hdcp at RK3399_PD_HDCP {
> + reg = <RK3399_PD_HDCP>;
> + clocks = <&cru ACLK_HDCP>,
> + <&cru HCLK_HDCP>,
> + <&cru PCLK_HDCP>;
> + pm_qos = <&qos_hdcp>;
> + #power-domain-cells = <0>;
> + };
> + };
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
> deleted file mode 100644
> index 8304eceb62e4..000000000000
> --- a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
> +++ /dev/null
> @@ -1,136 +0,0 @@
> -* Rockchip Power Domains
> -
> -Rockchip processors include support for multiple power domains which can be
> -powered up/down by software based on different application scenes to save power.
> -
> -Required properties for power domain controller:
> -- compatible: Should be one of the following.
> - "rockchip,px30-power-controller" - for PX30 SoCs.
> - "rockchip,rk3036-power-controller" - for RK3036 SoCs.
> - "rockchip,rk3066-power-controller" - for RK3066 SoCs.
> - "rockchip,rk3128-power-controller" - for RK3128 SoCs.
> - "rockchip,rk3188-power-controller" - for RK3188 SoCs.
> - "rockchip,rk3228-power-controller" - for RK3228 SoCs.
> - "rockchip,rk3288-power-controller" - for RK3288 SoCs.
> - "rockchip,rk3328-power-controller" - for RK3328 SoCs.
> - "rockchip,rk3366-power-controller" - for RK3366 SoCs.
> - "rockchip,rk3368-power-controller" - for RK3368 SoCs.
> - "rockchip,rk3399-power-controller" - for RK3399 SoCs.
> -- #power-domain-cells: Number of cells in a power-domain specifier.
> - Should be 1 for multiple PM domains.
> -- #address-cells: Should be 1.
> -- #size-cells: Should be 0.
> -
> -Required properties for power domain sub nodes:
> -- reg: index of the power domain, should use macros in:
> - "include/dt-bindings/power/px30-power.h" - for PX30 type power domain.
> - "include/dt-bindings/power/rk3036-power.h" - for RK3036 type power domain.
> - "include/dt-bindings/power/rk3066-power.h" - for RK3066 type power domain.
> - "include/dt-bindings/power/rk3128-power.h" - for RK3128 type power domain.
> - "include/dt-bindings/power/rk3188-power.h" - for RK3188 type power domain.
> - "include/dt-bindings/power/rk3228-power.h" - for RK3228 type power domain.
> - "include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
> - "include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain.
> - "include/dt-bindings/power/rk3366-power.h" - for RK3366 type power domain.
> - "include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain.
> - "include/dt-bindings/power/rk3399-power.h" - for RK3399 type power domain.
> -- clocks (optional): phandles to clocks which need to be enabled while power domain
> - switches state.
> -- pm_qos (optional): phandles to qos blocks which need to be saved and restored
> - while power domain switches state.
> -
> -Qos Example:
> -
> - qos_gpu: qos_gpu at ffaf0000 {
> - compatible ="syscon";
> - reg = <0x0 0xffaf0000 0x0 0x20>;
> - };
> -
> -Example:
> -
> - power: power-controller {
> - compatible = "rockchip,rk3288-power-controller";
> - #power-domain-cells = <1>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - pd_gpu {
> - reg = <RK3288_PD_GPU>;
> - clocks = <&cru ACLK_GPU>;
> - pm_qos = <&qos_gpu>;
> - };
> - };
> -
> - power: power-controller {
> - compatible = "rockchip,rk3368-power-controller";
> - #power-domain-cells = <1>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - pd_gpu_1 {
> - reg = <RK3368_PD_GPU_1>;
> - clocks = <&cru ACLK_GPU_CFG>;
> - };
> - };
> -
> -Example 2:
> - power: power-controller {
> - compatible = "rockchip,rk3399-power-controller";
> - #power-domain-cells = <1>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - pd_vio {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - reg = <RK3399_PD_VIO>;
> -
> - pd_vo {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - reg = <RK3399_PD_VO>;
> -
> - pd_vopb {
> - reg = <RK3399_PD_VOPB>;
> - };
> -
> - pd_vopl {
> - reg = <RK3399_PD_VOPL>;
> - };
> - };
> - };
> - };
> -
> -Node of a device using power domains must have a power-domains property,
> -containing a phandle to the power device node and an index specifying which
> -power domain to use.
> -The index should use macros in:
> - "include/dt-bindings/power/px30-power.h" - for px30 type power domain.
> - "include/dt-bindings/power/rk3036-power.h" - for rk3036 type power domain.
> - "include/dt-bindings/power/rk3128-power.h" - for rk3128 type power domain.
> - "include/dt-bindings/power/rk3128-power.h" - for rk3228 type power domain.
> - "include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
> - "include/dt-bindings/power/rk3328-power.h" - for rk3328 type power domain.
> - "include/dt-bindings/power/rk3366-power.h" - for rk3366 type power domain.
> - "include/dt-bindings/power/rk3368-power.h" - for rk3368 type power domain.
> - "include/dt-bindings/power/rk3399-power.h" - for rk3399 type power domain.
> -
> -Example of the node using power domain:
> -
> - node {
> - /* ... */
> - power-domains = <&power RK3288_PD_GPU>;
> - /* ... */
> - };
> -
> - node {
> - /* ... */
> - power-domains = <&power RK3368_PD_GPU_1>;
> - /* ... */
> - };
> -
> - node {
> - /* ... */
> - power-domains = <&power RK3399_PD_VOPB>;
> - /* ... */
> - };
>
More information about the linux-arm-kernel
mailing list