[PATCH v12 1/2] scsi: ufs: Enable power management for wlun
Adrian Hunter
adrian.hunter at intel.com
Tue Mar 23 06:12:17 GMT 2021
On 22/03/21 9:53 pm, Asutosh Das (asd) wrote:
> On 3/19/2021 10:47 AM, Adrian Hunter wrote:
>> On 19/03/21 2:35 am, Asutosh Das wrote:
>>> During runtime-suspend of ufs host, the scsi devices are
>>> already suspended and so are the queues associated with them.
>>> But the ufs host sends SSU to wlun during its runtime-suspend.
>>> During the process blk_queue_enter checks if the queue is not in
>>> suspended state. If so, it waits for the queue to resume, and never
>>> comes out of it.
>>> The commit
>>> (d55d15a33: scsi: block: Do not accept any requests while suspended)
>>> adds the check if the queue is in suspended state in blk_queue_enter().
>>>
>>> Call trace:
>>> __switch_to+0x174/0x2c4
>>> __schedule+0x478/0x764
>>> schedule+0x9c/0xe0
>>> blk_queue_enter+0x158/0x228
>>> blk_mq_alloc_request+0x40/0xa4
>>> blk_get_request+0x2c/0x70
>>> __scsi_execute+0x60/0x1c4
>>> ufshcd_set_dev_pwr_mode+0x124/0x1e4
>>> ufshcd_suspend+0x208/0x83c
>>> ufshcd_runtime_suspend+0x40/0x154
>>> ufshcd_pltfrm_runtime_suspend+0x14/0x20
>>> pm_generic_runtime_suspend+0x28/0x3c
>>> __rpm_callback+0x80/0x2a4
>>> rpm_suspend+0x308/0x614
>>> rpm_idle+0x158/0x228
>>> pm_runtime_work+0x84/0xac
>>> process_one_work+0x1f0/0x470
>>> worker_thread+0x26c/0x4c8
>>> kthread+0x13c/0x320
>>> ret_from_fork+0x10/0x18
>>>
>>> Fix this by registering ufs device wlun as a scsi driver and
>>> registering it for block runtime-pm. Also make this as a
>>> supplier for all other luns. That way, this device wlun
>>> suspends after all the consumers and resumes after
>>> hba resumes.
>>>
>>> Co-developed-by: Can Guo <cang at codeaurora.org>
>>> Signed-off-by: Can Guo <cang at codeaurora.org>
>>> Signed-off-by: Asutosh Das <asutoshd at codeaurora.org>
>>
>> I have some more comments that may help straighten things out.
>>
>> Also please look at ufs_debugfs_get_user_access() and
>> ufs_debugfs_put_user_access() that now need to scsi_autopm_get/put_device
>> sdev_ufs_device.
>>
>> It would also be good if you could re-base on linux-next.
>>
>
> Hi Adrian
> Thanks for the comments.
>
> I agree moving the code to wlun probe and other changes.
> But it looks to me that it may not fully solve the issue.
>
> Please let me explain my understanding on this:
>
> (Please refer to the logs in v10)
> scsi_autopm_*() are invoked on a sdev.
> pm_runtime_get_suppliers()/rpm_put_suppliers() are on the supplier device.
>
> For the device wlun:
> slave_configure():
> - doesn't set the rpm_autosuspend
> - pm_runtime_getnoresume()
> scsi_sysfs_add_sdev():
> - pm_runtime_forbid()
> - scsi_autopm_get_device()
> - device_add()
> - ufshcd_wl_probe()
> - scsi_autopm_put_device()
>
> For all other scsi devices:
> slave_alloc():
> - ufshcd_setup_links()
> Say all link_add: pm_runtime_put(&hba->sdev_ufs_device->sdev_gendev);
With DL_FLAG_RPM_ACTIVE, links will 'get' not 'put'
> slave_configure():
> - set rpm_autosuspend
> scsi_sysfs_add_sdev():
> - scsi_autopm_get_device()
> - device_add() -> schedules an async probe()
> - scsi_autopm_put_device() - (1)
>
> Now the rpm_put_suppliers() can be invoked *after* pm_runtime_get_suppliers() of the async probe(), since both are running in different contexts.
Only if the sd device suspends.
> In that case, the usage_count of supplier would be decremented until rpm_active of this link becomes 1.
Right, because the sd device suspended.
> Now the pm_runtime_get_suppliers() expects the link_active to be more than 1.
Not sure what you mean here. pm_runtime_*put*_suppliers() won't do anything if the link count is 1.
> Now then, there comes a time, that when sd_probe() schedules a suspend, the supplier usage_count becomes 0 and the link_active becomes 1.
> And the supplier suspends before the consumer.
sd probe first resumes the sd device which will resume the supplier.
>
> So I was wondering, what'd make sure that the pm_runtime_get_suppliers() from driver_probe_device() is invoked after scsi_autopm_put_device() (1) finishes the rpm_put_suppliers().
>
> Am not sure if I'm missing something in this.
> Do you think, the current changes alone can fix the above issue?
Yes, but let's see.
>
> -asd
>
>>> ---
>>> drivers/scsi/ufs/cdns-pltfrm.c | 2 +
>>> drivers/scsi/ufs/tc-dwc-g210-pci.c | 2 +
>>> drivers/scsi/ufs/ufs-debugfs.c | 2 +-
>>> drivers/scsi/ufs/ufs-debugfs.h | 2 +-
>>> drivers/scsi/ufs/ufs-exynos.c | 2 +
>>> drivers/scsi/ufs/ufs-hisi.c | 2 +
>>> drivers/scsi/ufs/ufs-mediatek.c | 12 +-
>>> drivers/scsi/ufs/ufs-qcom.c | 2 +
>>> drivers/scsi/ufs/ufs_bsg.c | 6 +-
>>> drivers/scsi/ufs/ufshcd-pci.c | 36 +--
>>> drivers/scsi/ufs/ufshcd.c | 622 ++++++++++++++++++++++++++-----------
>>> drivers/scsi/ufs/ufshcd.h | 6 +
>>> include/trace/events/ufs.h | 20 ++
>>> 13 files changed, 491 insertions(+), 225 deletions(-)
>>>
>>> diff --git a/drivers/scsi/ufs/cdns-pltfrm.c b/drivers/scsi/ufs/cdns-pltfrm.c
>>> index 149391f..3e70c23 100644
>>> --- a/drivers/scsi/ufs/cdns-pltfrm.c
>>> +++ b/drivers/scsi/ufs/cdns-pltfrm.c
>>> @@ -319,6 +319,8 @@ static const struct dev_pm_ops cdns_ufs_dev_pm_ops = {
>>> .runtime_suspend = ufshcd_pltfrm_runtime_suspend,
>>> .runtime_resume = ufshcd_pltfrm_runtime_resume,
>>> .runtime_idle = ufshcd_pltfrm_runtime_idle,
>>> + .prepare = ufshcd_suspend_prepare,
>>> + .complete = ufshcd_resume_complete,
>>> };
>>> static struct platform_driver cdns_ufs_pltfrm_driver = {
>>> diff --git a/drivers/scsi/ufs/tc-dwc-g210-pci.c b/drivers/scsi/ufs/tc-dwc-g210-pci.c
>>> index 67a6a61..b01db12 100644
>>> --- a/drivers/scsi/ufs/tc-dwc-g210-pci.c
>>> +++ b/drivers/scsi/ufs/tc-dwc-g210-pci.c
>>> @@ -148,6 +148,8 @@ static const struct dev_pm_ops tc_dwc_g210_pci_pm_ops = {
>>> .runtime_suspend = tc_dwc_g210_pci_runtime_suspend,
>>> .runtime_resume = tc_dwc_g210_pci_runtime_resume,
>>> .runtime_idle = tc_dwc_g210_pci_runtime_idle,
>>> + .prepare = ufshcd_suspend_prepare,
>>> + .complete = ufshcd_resume_complete,
>>> };
>>> static const struct pci_device_id tc_dwc_g210_pci_tbl[] = {
>>> diff --git a/drivers/scsi/ufs/ufs-debugfs.c b/drivers/scsi/ufs/ufs-debugfs.c
>>> index dee98dc..06457d5 100644
>>> --- a/drivers/scsi/ufs/ufs-debugfs.c
>>> +++ b/drivers/scsi/ufs/ufs-debugfs.c
>>> @@ -13,7 +13,7 @@ void __init ufs_debugfs_init(void)
>>> ufs_debugfs_root = debugfs_create_dir("ufshcd", NULL);
>>> }
>>> -void __exit ufs_debugfs_exit(void)
>>> +void ufs_debugfs_exit(void)
>>> {
>>> debugfs_remove_recursive(ufs_debugfs_root);
>>> }
>>> diff --git a/drivers/scsi/ufs/ufs-debugfs.h b/drivers/scsi/ufs/ufs-debugfs.h
>>> index f35b39c..12c2730 100644
>>> --- a/drivers/scsi/ufs/ufs-debugfs.h
>>> +++ b/drivers/scsi/ufs/ufs-debugfs.h
>>> @@ -9,7 +9,7 @@ struct ufs_hba;
>>> #ifdef CONFIG_DEBUG_FS
>>> void __init ufs_debugfs_init(void);
>>> -void __exit ufs_debugfs_exit(void);
>>> +void ufs_debugfs_exit(void);
>>> void ufs_debugfs_hba_init(struct ufs_hba *hba);
>>> void ufs_debugfs_hba_exit(struct ufs_hba *hba);
>>> #else
>>> diff --git a/drivers/scsi/ufs/ufs-exynos.c b/drivers/scsi/ufs/ufs-exynos.c
>>> index 267943a1..45c0b02 100644
>>> --- a/drivers/scsi/ufs/ufs-exynos.c
>>> +++ b/drivers/scsi/ufs/ufs-exynos.c
>>> @@ -1268,6 +1268,8 @@ static const struct dev_pm_ops exynos_ufs_pm_ops = {
>>> .runtime_suspend = ufshcd_pltfrm_runtime_suspend,
>>> .runtime_resume = ufshcd_pltfrm_runtime_resume,
>>> .runtime_idle = ufshcd_pltfrm_runtime_idle,
>>> + .prepare = ufshcd_suspend_prepare,
>>> + .complete = ufshcd_resume_complete,
>>> };
>>> static struct platform_driver exynos_ufs_pltform = {
>>> diff --git a/drivers/scsi/ufs/ufs-hisi.c b/drivers/scsi/ufs/ufs-hisi.c
>>> index 0aa5813..d463b44 100644
>>> --- a/drivers/scsi/ufs/ufs-hisi.c
>>> +++ b/drivers/scsi/ufs/ufs-hisi.c
>>> @@ -574,6 +574,8 @@ static const struct dev_pm_ops ufs_hisi_pm_ops = {
>>> .runtime_suspend = ufshcd_pltfrm_runtime_suspend,
>>> .runtime_resume = ufshcd_pltfrm_runtime_resume,
>>> .runtime_idle = ufshcd_pltfrm_runtime_idle,
>>> + .prepare = ufshcd_suspend_prepare,
>>> + .complete = ufshcd_resume_complete,
>>> };
>>> static struct platform_driver ufs_hisi_pltform = {
>>> diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
>>> index c55202b..51c82e3 100644
>>> --- a/drivers/scsi/ufs/ufs-mediatek.c
>>> +++ b/drivers/scsi/ufs/ufs-mediatek.c
>>> @@ -810,12 +810,10 @@ static int ufs_mtk_post_link(struct ufs_hba *hba)
>>> /* enable unipro clock gating feature */
>>> ufs_mtk_cfg_unipro_cg(hba, true);
>>> - /* configure auto-hibern8 timer to 10ms */
>>> - if (ufshcd_is_auto_hibern8_supported(hba)) {
>>> - ufshcd_auto_hibern8_update(hba,
>>> - FIELD_PREP(UFSHCI_AHIBERN8_TIMER_MASK, 10) |
>>> - FIELD_PREP(UFSHCI_AHIBERN8_SCALE_MASK, 3));
>>> - }
>>> + /* will be configured during probe hba */
>>> + if (ufshcd_is_auto_hibern8_supported(hba))
>>> + hba->ahit = FIELD_PREP(UFSHCI_AHIBERN8_TIMER_MASK, 10) |
>>> + FIELD_PREP(UFSHCI_AHIBERN8_SCALE_MASK, 3);
>>> ufs_mtk_setup_clk_gating(hba);
>>> @@ -1097,6 +1095,8 @@ static const struct dev_pm_ops ufs_mtk_pm_ops = {
>>> .runtime_suspend = ufshcd_pltfrm_runtime_suspend,
>>> .runtime_resume = ufshcd_pltfrm_runtime_resume,
>>> .runtime_idle = ufshcd_pltfrm_runtime_idle,
>>> + .prepare = ufshcd_suspend_prepare,
>>> + .complete = ufshcd_resume_complete,
>>> };
>>> static struct platform_driver ufs_mtk_pltform = {
>>> diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
>>> index f97d7b0..9aa098a 100644
>>> --- a/drivers/scsi/ufs/ufs-qcom.c
>>> +++ b/drivers/scsi/ufs/ufs-qcom.c
>>> @@ -1546,6 +1546,8 @@ static const struct dev_pm_ops ufs_qcom_pm_ops = {
>>> .runtime_suspend = ufshcd_pltfrm_runtime_suspend,
>>> .runtime_resume = ufshcd_pltfrm_runtime_resume,
>>> .runtime_idle = ufshcd_pltfrm_runtime_idle,
>>> + .prepare = ufshcd_suspend_prepare,
>>> + .complete = ufshcd_resume_complete,
>>> };
>>> static struct platform_driver ufs_qcom_pltform = {
>>> diff --git a/drivers/scsi/ufs/ufs_bsg.c b/drivers/scsi/ufs/ufs_bsg.c
>>> index 5b2bc1a..cbb5a90 100644
>>> --- a/drivers/scsi/ufs/ufs_bsg.c
>>> +++ b/drivers/scsi/ufs/ufs_bsg.c
>>> @@ -97,7 +97,7 @@ static int ufs_bsg_request(struct bsg_job *job)
>>> bsg_reply->reply_payload_rcv_len = 0;
>>> - pm_runtime_get_sync(hba->dev);
>>> + scsi_autopm_get_device(hba->sdev_ufs_device);
>>> msgcode = bsg_request->msgcode;
>>> switch (msgcode) {
>>> @@ -106,7 +106,7 @@ static int ufs_bsg_request(struct bsg_job *job)
>>> ret = ufs_bsg_alloc_desc_buffer(hba, job, &desc_buff,
>>> &desc_len, desc_op);
>>> if (ret) {
>>> - pm_runtime_put_sync(hba->dev);
>>> + scsi_autopm_put_device(hba->sdev_ufs_device);
>>> goto out;
>>> }
>>> @@ -138,7 +138,7 @@ static int ufs_bsg_request(struct bsg_job *job)
>>> break;
>>> }
>>> - pm_runtime_put_sync(hba->dev);
>>> + scsi_autopm_put_device(hba->sdev_ufs_device);
>>> if (!desc_buff)
>>> goto out;
>>> diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c
>>> index fadd566..5d4ffd2 100644
>>> --- a/drivers/scsi/ufs/ufshcd-pci.c
>>> +++ b/drivers/scsi/ufs/ufshcd-pci.c
>>> @@ -247,29 +247,6 @@ static int ufshcd_pci_resume(struct device *dev)
>>> return ufshcd_system_resume(dev_get_drvdata(dev));
>>> }
>>> -/**
>>> - * ufshcd_pci_poweroff - suspend-to-disk poweroff function
>>> - * @dev: pointer to PCI device handle
>>> - *
>>> - * Returns 0 if successful
>>> - * Returns non-zero otherwise
>>> - */
>>> -static int ufshcd_pci_poweroff(struct device *dev)
>>> -{
>>> - struct ufs_hba *hba = dev_get_drvdata(dev);
>>> - int spm_lvl = hba->spm_lvl;
>>> - int ret;
>>> -
>>> - /*
>>> - * For poweroff we need to set the UFS device to PowerDown mode.
>>> - * Force spm_lvl to ensure that.
>>> - */
>>> - hba->spm_lvl = 5;
>>> - ret = ufshcd_system_suspend(hba);
>>> - hba->spm_lvl = spm_lvl;
>>> - return ret;
>>> -}
>>> -
>>> #endif /* !CONFIG_PM_SLEEP */
>>> #ifdef CONFIG_PM
>>> @@ -365,17 +342,14 @@ ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>>> }
>>> static const struct dev_pm_ops ufshcd_pci_pm_ops = {
>>> -#ifdef CONFIG_PM_SLEEP
>>> - .suspend = ufshcd_pci_suspend,
>>> - .resume = ufshcd_pci_resume,
>>> - .freeze = ufshcd_pci_suspend,
>>> - .thaw = ufshcd_pci_resume,
>>> - .poweroff = ufshcd_pci_poweroff,
>>> - .restore = ufshcd_pci_resume,
>>> -#endif
>>> SET_RUNTIME_PM_OPS(ufshcd_pci_runtime_suspend,
>>> ufshcd_pci_runtime_resume,
>>> ufshcd_pci_runtime_idle)
>>> + SET_SYSTEM_SLEEP_PM_OPS(ufshcd_pci_suspend, ufshcd_pci_resume)
>>> +#ifdef CONFIG_PM_SLEEP
>>> + .prepare = ufshcd_suspend_prepare,
>>> + .complete = ufshcd_resume_complete,
>>> +#endif
>>> };
>>> static const struct pci_device_id ufshcd_pci_tbl[] = {
>>> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
>>> index 45624c7..7106cb8 100644
>>> --- a/drivers/scsi/ufs/ufshcd.c
>>> +++ b/drivers/scsi/ufs/ufshcd.c
>>> @@ -16,6 +16,7 @@
>>> #include <linux/bitfield.h>
>>> #include <linux/blk-pm.h>
>>> #include <linux/blkdev.h>
>>> +#include <scsi/scsi_driver.h>
>>> #include "ufshcd.h"
>>> #include "ufs_quirks.h"
>>> #include "unipro.h"
>>> @@ -78,6 +79,8 @@
>>> /* Polling time to wait for fDeviceInit */
>>> #define FDEVICEINIT_COMPL_TIMEOUT 1500 /* millisecs */
>>> +#define wlun_dev_to_hba(dv) shost_priv(to_scsi_device(dv)->host)
>>> +
>>> #define ufshcd_toggle_vreg(_dev, _vreg, _on) \
>>> ({ \
>>> int _ret; \
>>> @@ -1556,7 +1559,7 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev,
>>> if (value == hba->clk_scaling.is_enabled)
>>> goto out;
>>> - pm_runtime_get_sync(hba->dev);
>>> + scsi_autopm_get_device(hba->sdev_ufs_device);
>>> ufshcd_hold(hba, false);
>>> hba->clk_scaling.is_enabled = value;
>>> @@ -1572,7 +1575,7 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev,
>>> }
>>> ufshcd_release(hba);
>>> - pm_runtime_put_sync(hba->dev);
>>> + scsi_autopm_put_device(hba->sdev_ufs_device);
>>> out:
>>> up(&hba->host_sem);
>>> return err ? err : count;
>>> @@ -2572,6 +2575,17 @@ static inline u16 ufshcd_upiu_wlun_to_scsi_wlun(u8 upiu_wlun_id)
>>> return (upiu_wlun_id & ~UFS_UPIU_WLUN_ID) | SCSI_W_LUN_BASE;
>>> }
>>> +static inline bool is_rpmb_wlun(struct scsi_device *sdev)
>>> +{
>>> + return (sdev->lun == ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_RPMB_WLUN));
>>> +}
>>> +
>>> +static inline bool is_device_wlun(struct scsi_device *sdev)
>>> +{
>>> + return (sdev->lun ==
>>> + ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_UFS_DEVICE_WLUN));
>>> +}
>>> +
>>> static void ufshcd_init_lrb(struct ufs_hba *hba, struct ufshcd_lrb *lrb, int i)
>>> {
>>> struct utp_transfer_cmd_desc *cmd_descp = hba->ucdl_base_addr;
>>> @@ -4106,11 +4120,11 @@ void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit)
>>> spin_unlock_irqrestore(hba->host->host_lock, flags);
>>> if (update && !pm_runtime_suspended(hba->dev)) {
>>> - pm_runtime_get_sync(hba->dev);
>>> + scsi_autopm_get_device(hba->sdev_ufs_device);
>>> ufshcd_hold(hba, false);
>>> ufshcd_auto_hibern8_enable(hba);
>>> ufshcd_release(hba);
>>> - pm_runtime_put(hba->dev);
>>> + scsi_autopm_put_device(hba->sdev_ufs_device);
>>> }
>>> }
>>> EXPORT_SYMBOL_GPL(ufshcd_auto_hibern8_update);
>>> @@ -4808,6 +4822,41 @@ static inline void ufshcd_get_lu_power_on_wp_status(struct ufs_hba *hba,
>>> }
>>> /**
>>> + * ufshcd_setup_links - associate link b/w device wlun and other luns
>>> + * @sdev: pointer to SCSI device
>>> + * @hba: pointer to ufs hba
>>> + */
>>> +static void ufshcd_setup_links(struct ufs_hba *hba, struct scsi_device *sdev)
>>> +{
>>> + struct device_link *link;
>>> +
>>> + /*
>>> + * device wlun is the supplier & rest of the luns are consumers
>>> + * This ensures that device wlun suspends after all other luns.
>>> + */
>>> + if (hba->sdev_ufs_device) {
>>> + link = device_link_add(&sdev->sdev_gendev,
>>> + &hba->sdev_ufs_device->sdev_gendev,
>>> + DL_FLAG_PM_RUNTIME|DL_FLAG_RPM_ACTIVE);
>>> + if (!link) {
>>> + dev_err(&sdev->sdev_gendev, "Failed establishing link - %s\n",
>>> + dev_name(&hba->sdev_ufs_device->sdev_gendev));
>>> + return;
>>> + }
>>> + hba->luns_avail--;
>>> + /* Ignore REPORT_LUN wlun probing */
>>> + if (hba->luns_avail != 1) {
>>
>> The condition here is the wrong way around. i.e. should be
>>
>> if (hba->luns_avail == 1) {
>>
>>> + pm_runtime_put_noidle(&hba->sdev_ufs_device->sdev_gendev);
>>
>> If the usage_count is zero here, then we should let it suspend i.e. make this:
>>
>> pm_runtime_put(&hba->sdev_ufs_device->sdev_gendev);
>>
>> Note this pairs with the pm_runtime_get_noresume() that needs to be added
>> to ufshcd_slave_configure. Please see comments for ufshcd_slave_configure().
>>
>>
>>> + pm_runtime_allow(&hba->sdev_ufs_device->sdev_gendev);
>>
>> This pm_runtime_allow should not be here. It should be in ufshcd_wl_probe().
>> Please see comments for ufshcd_wl_probe().
>>
>>> + return;
>>> + }
>>> + } else {
>>> + /* device wlun is probed */
>>> + hba->luns_avail--;
>>> + }
>>> +}
>>> +
>>> +/**
>>> * ufshcd_slave_alloc - handle initial SCSI device configurations
>>> * @sdev: pointer to SCSI device
>>> *
>>> @@ -4838,6 +4887,8 @@ static int ufshcd_slave_alloc(struct scsi_device *sdev)
>>> ufshcd_get_lu_power_on_wp_status(hba, sdev);
>>> + ufshcd_setup_links(hba, sdev);
>>> +
>>> return 0;
>>> }
>>> @@ -4869,8 +4920,13 @@ static int ufshcd_slave_configure(struct scsi_device *sdev)
>>> blk_queue_update_dma_pad(q, PRDT_DATA_BYTE_COUNT_PAD - 1);
>>> if (hba->quirks & UFSHCD_QUIRK_ALIGN_SG_WITH_PAGE_SIZE)
>>> blk_queue_update_dma_alignment(q, PAGE_SIZE - 1);
>>> -
>>> - if (ufshcd_is_rpm_autosuspend_allowed(hba))
>>> + /*
>>> + * Block runtime-pm until all consumers are added.
>>> + * Refer ufshcd_setup_links().
>>> + */
>>> + if (is_device_wlun(sdev))
>>> + pm_runtime_forbid(&sdev->sdev_gendev);
>>
>> Since rpm_autosuspend is not being set for sdev_ufs_device, scsi_sysfs_add_sdev()
>> will pm_runtime_forbid() it anyway. We should increase the usage_count instead
>> i.e.
>>
>> pm_runtime_get_noresume(&sdev->sdev_gendev);
>>
>>> + else if (ufshcd_is_rpm_autosuspend_allowed(hba))
>>> sdev->rpm_autosuspend = 1;
>>> ufshcd_crypto_setup_rq_keyslot_manager(hba, q);
>>> @@ -4985,15 +5041,9 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
>>> * UFS device needs urgent BKOPs.
>>> */
>>> if (!hba->pm_op_in_progress &&
>>> - ufshcd_is_exception_event(lrbp->ucd_rsp_ptr) &&
>>> - schedule_work(&hba->eeh_work)) {
>>> - /*
>>> - * Prevent suspend once eeh_work is scheduled
>>> - * to avoid deadlock between ufshcd_suspend
>>> - * and exception event handler.
>>> - */
>>> - pm_runtime_get_noresume(hba->dev);
>>> - }
>>> + ufshcd_is_exception_event(lrbp->ucd_rsp_ptr))
>>> + /* Flushed in suspend */
>>> + schedule_work(&hba->eeh_work);
>>> break;
>>> case UPIU_TRANSACTION_REJECT_UPIU:
>>> /* TODO: handle Reject UPIU Response */
>>> @@ -5589,8 +5639,8 @@ static void ufshcd_rpm_dev_flush_recheck_work(struct work_struct *work)
>>> * after a certain delay to recheck the threshold by next runtime
>>> * suspend.
>>> */
>>> - pm_runtime_get_sync(hba->dev);
>>> - pm_runtime_put_sync(hba->dev);
>>> + scsi_autopm_get_device(hba->sdev_ufs_device);
>>> + scsi_autopm_put_device(hba->sdev_ufs_device);
>>> }
>>> /**
>>> @@ -5607,7 +5657,6 @@ static void ufshcd_exception_event_handler(struct work_struct *work)
>>> u32 status = 0;
>>> hba = container_of(work, struct ufs_hba, eeh_work);
>>> - pm_runtime_get_sync(hba->dev);
>>> ufshcd_scsi_block_requests(hba);
>>> err = ufshcd_get_ee_status(hba, &status);
>>> if (err) {
>>> @@ -5623,14 +5672,6 @@ static void ufshcd_exception_event_handler(struct work_struct *work)
>>> out:
>>> ufshcd_scsi_unblock_requests(hba);
>>> - /*
>>> - * pm_runtime_get_noresume is called while scheduling
>>> - * eeh_work to avoid suspend racing with exception work.
>>> - * Hence decrement usage counter using pm_runtime_put_noidle
>>> - * to allow suspend on completion of exception event handler.
>>> - */
>>> - pm_runtime_put_noidle(hba->dev);
>>> - pm_runtime_put(hba->dev);
>>> return;
>>> }
>>> @@ -5755,12 +5796,13 @@ static void ufshcd_clk_scaling_suspend(struct ufs_hba *hba, bool suspend)
>>> static void ufshcd_err_handling_prepare(struct ufs_hba *hba)
>>> {
>>> - pm_runtime_get_sync(hba->dev);
>>> - if (pm_runtime_status_suspended(hba->dev) || hba->is_sys_suspended) {
>>> + scsi_autopm_get_device(hba->sdev_ufs_device);
>>> + if (pm_runtime_status_suspended(&hba->sdev_ufs_device->sdev_gendev) ||
>>> + hba->is_sys_suspended) {
>>> enum ufs_pm_op pm_op;
>>> /*
>>> - * Don't assume anything of pm_runtime_get_sync(), if
>>> + * Don't assume anything of resume, if
>>> * resume fails, irq and clocks can be OFF, and powers
>>> * can be OFF or in LPM.
>>> */
>>> @@ -5789,7 +5831,7 @@ static void ufshcd_err_handling_unprepare(struct ufs_hba *hba)
>>> ufshcd_release(hba);
>>> if (ufshcd_is_clkscaling_supported(hba))
>>> ufshcd_clk_scaling_suspend(hba, false);
>>> - pm_runtime_put(hba->dev);
>>> + pm_runtime_put(&hba->sdev_ufs_device->sdev_gendev);
>>> }
>>> static inline bool ufshcd_err_handling_should_stop(struct ufs_hba *hba)
>>> @@ -5810,14 +5852,14 @@ static void ufshcd_recover_pm_error(struct ufs_hba *hba)
>>> hba->is_sys_suspended = false;
>>> /*
>>> - * Set RPM status of hba device to RPM_ACTIVE,
>>> + * Set RPM status of wlun device to RPM_ACTIVE,
>>> * this also clears its runtime error.
>>> */
>>> - ret = pm_runtime_set_active(hba->dev);
>>> + ret = pm_runtime_set_active(&hba->sdev_ufs_device->sdev_gendev);
>>> /*
>>> - * If hba device had runtime error, we also need to resume those
>>> - * scsi devices under hba in case any of them has failed to be
>>> - * resumed due to hba runtime resume failure. This is to unblock
>>> + * If wlun device had runtime error, we also need to resume those
>>> + * consumer scsi devices in case any of them has failed to be
>>> + * resumed due to supplier runtime resume failure. This is to unblock
>>> * blk_queue_enter in case there are bios waiting inside it.
>>> */
>>> if (!ret) {
>>> @@ -7207,11 +7249,12 @@ static void ufshcd_set_active_icc_lvl(struct ufs_hba *hba)
>>> static inline void ufshcd_blk_pm_runtime_init(struct scsi_device *sdev)
>>> {
>>> + int dly = is_device_wlun(sdev) ? 0:RPM_AUTOSUSPEND_DELAY_MS;
>>> +
>>> scsi_autopm_get_device(sdev);
>>> blk_pm_runtime_init(sdev->request_queue, &sdev->sdev_gendev);
>>> if (sdev->rpm_autosuspend)
>>> - pm_runtime_set_autosuspend_delay(&sdev->sdev_gendev,
>>> - RPM_AUTOSUSPEND_DELAY_MS);
>>> + pm_runtime_set_autosuspend_delay(&sdev->sdev_gendev, dly);
>>> scsi_autopm_put_device(sdev);
>>> }
>>> @@ -7253,6 +7296,7 @@ static int ufshcd_scsi_add_wlus(struct ufs_hba *hba)
>>> hba->sdev_ufs_device = NULL;
>>> goto out;
>>> }
>>> + scsi_autopm_get_device(hba->sdev_ufs_device);
>>> ufshcd_blk_pm_runtime_init(hba->sdev_ufs_device);
>>
>> Let's drop both scsi_autopm_get_device() and ufshcd_blk_pm_runtime_init()
>> here and instead do things in ufshcd_wl_probe() - see comments for ufshcd_wl_probe()
>>
>>> scsi_device_put(hba->sdev_ufs_device);
>>> @@ -7417,6 +7461,9 @@ static int ufs_get_device_desc(struct ufs_hba *hba)
>>> goto out;
>>> }
>>> + hba->luns_avail = desc_buf[DEVICE_DESC_PARAM_NUM_LU] +
>>> + desc_buf[DEVICE_DESC_PARAM_NUM_WLU];
>>> +
>>> ufs_fixup_device_setup(hba);
>>> ufshcd_wb_probe(hba, desc_buf);
>>> @@ -7892,6 +7939,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool async)
>>> ufshcd_set_ufs_dev_active(hba);
>>> ufshcd_force_reset_auto_bkops(hba);
>>> hba->wlun_dev_clr_ua = true;
>>> + hba->wlun_rpmb_clr_ua = true;
>>> /* Gear up to HS gear if supported */
>>> if (hba->max_pwr_info.is_valid) {
>>> @@ -8475,7 +8523,8 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
>>> * handling context.
>>> */
>>> hba->host->eh_noresume = 1;
>>> - ufshcd_clear_ua_wluns(hba);
>>> + if (hba->wlun_dev_clr_ua)
>>> + ufshcd_clear_ua_wlun(hba, UFS_UPIU_UFS_DEVICE_WLUN);
>>> cmd[4] = pwr_mode << 4;
>>> @@ -8650,23 +8699,7 @@ static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba)
>>> ufshcd_setup_hba_vreg(hba, true);
>>> }
>>> -/**
>>> - * ufshcd_suspend - helper function for suspend operations
>>> - * @hba: per adapter instance
>>> - * @pm_op: desired low power operation type
>>> - *
>>> - * This function will try to put the UFS device and link into low power
>>> - * mode based on the "rpm_lvl" (Runtime PM level) or "spm_lvl"
>>> - * (System PM level).
>>> - *
>>> - * If this function is called during shutdown, it will make sure that
>>> - * both UFS device and UFS link is powered off.
>>> - *
>>> - * NOTE: UFS device & link must be active before we enter in this function.
>>> - *
>>> - * Returns 0 for success and non-zero for failure
>>> - */
>>> -static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>> +static int __ufshcd_wl_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>> {
>>> int ret = 0;
>>> int check_for_bkops;
>>> @@ -8674,7 +8707,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>> enum ufs_dev_pwr_mode req_dev_pwr_mode;
>>> enum uic_link_state req_link_state;
>>> - hba->pm_op_in_progress = 1;
>>> + hba->pm_op_in_progress = true;
>>> if (!ufshcd_is_shutdown_pm(pm_op)) {
>>> pm_lvl = ufshcd_is_runtime_pm(pm_op) ?
>>> hba->rpm_lvl : hba->spm_lvl;
>>> @@ -8697,17 +8730,17 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>> if (req_dev_pwr_mode == UFS_ACTIVE_PWR_MODE &&
>>> req_link_state == UIC_LINK_ACTIVE_STATE) {
>>> - goto disable_clks;
>>> + goto enable_scaling;
>>> }
>>> if ((req_dev_pwr_mode == hba->curr_dev_pwr_mode) &&
>>> (req_link_state == hba->uic_link_state))
>>> - goto enable_gating;
>>> + goto enable_scaling;
>>> /* UFS device & link must be active before we enter in this function */
>>> if (!ufshcd_is_ufs_dev_active(hba) || !ufshcd_is_link_active(hba)) {
>>> ret = -EINVAL;
>>> - goto enable_gating;
>>> + goto enable_scaling;
>>> }
>>> if (ufshcd_is_runtime_pm(pm_op)) {
>>> @@ -8719,7 +8752,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>> */
>>> ret = ufshcd_urgent_bkops(hba);
>>> if (ret)
>>> - goto enable_gating;
>>> + goto enable_scaling;
>>> } else {
>>> /* make sure that auto bkops is disabled */
>>> ufshcd_disable_auto_bkops(hba);
>>> @@ -8747,7 +8780,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>> if (!hba->dev_info.b_rpm_dev_flush_capable) {
>>> ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
>>> if (ret)
>>> - goto enable_gating;
>>> + goto enable_scaling;
>>> }
>>> }
>>> @@ -8760,7 +8793,6 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>> if (ret)
>>> goto set_dev_active;
>>> -disable_clks:
>>> /*
>>> * Call vendor specific suspend callback. As these callbacks may access
>>> * vendor specific host controller register space call them before the
>>> @@ -8769,28 +8801,9 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>> ret = ufshcd_vops_suspend(hba, pm_op);
>>> if (ret)
>>> goto set_link_active;
>>> - /*
>>> - * Disable the host irq as host controller as there won't be any
>>> - * host controller transaction expected till resume.
>>> - */
>>> - ufshcd_disable_irq(hba);
>>> -
>>> - ufshcd_setup_clocks(hba, false);
>>> -
>>> - if (ufshcd_is_clkgating_allowed(hba)) {
>>> - hba->clk_gating.state = CLKS_OFF;
>>> - trace_ufshcd_clk_gating(dev_name(hba->dev),
>>> - hba->clk_gating.state);
>>> - }
>>> -
>>> - ufshcd_vreg_set_lpm(hba);
>>> -
>>> - /* Put the host controller in low power mode if possible */
>>> - ufshcd_hba_vreg_set_lpm(hba);
>>> goto out;
>>> set_link_active:
>>> - ufshcd_vreg_set_hpm(hba);
>>> /*
>>> * Device hardware reset is required to exit DeepSleep. Also, for
>>> * DeepSleep, the link is off so host reset and restore will be done
>>> @@ -8812,57 +8825,32 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>> }
>>> if (!ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE))
>>> ufshcd_disable_auto_bkops(hba);
>>> -enable_gating:
>>> +enable_scaling:
>>> if (ufshcd_is_clkscaling_supported(hba))
>>> ufshcd_clk_scaling_suspend(hba, false);
>>> - hba->clk_gating.is_suspended = false;
>>> hba->dev_info.b_rpm_dev_flush_capable = false;
>>> - ufshcd_clear_ua_wluns(hba);
>>> - ufshcd_release(hba);
>>> out:
>>> if (hba->dev_info.b_rpm_dev_flush_capable) {
>>> schedule_delayed_work(&hba->rpm_dev_flush_recheck_work,
>>> msecs_to_jiffies(RPM_DEV_FLUSH_RECHECK_WORK_DELAY_MS));
>>> }
>>> - hba->pm_op_in_progress = 0;
>>> -
>>> - if (ret)
>>> - ufshcd_update_evt_hist(hba, UFS_EVT_SUSPEND_ERR, (u32)ret);
>>> + if (ret) {
>>> + ufshcd_update_evt_hist(hba, UFS_EVT_WL_SUSP_ERR, (u32)ret);
>>> + hba->clk_gating.is_suspended = false;
>>> + ufshcd_release(hba);
>>> + }
>>> + hba->pm_op_in_progress = false;
>>> return ret;
>>> }
>>> -/**
>>> - * ufshcd_resume - helper function for resume operations
>>> - * @hba: per adapter instance
>>> - * @pm_op: runtime PM or system PM
>>> - *
>>> - * This function basically brings the UFS device, UniPro link and controller
>>> - * to active state.
>>> - *
>>> - * Returns 0 for success and non-zero for failure
>>> - */
>>> -static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>> +static int __ufshcd_wl_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>> {
>>> int ret;
>>> - enum uic_link_state old_link_state;
>>> + enum uic_link_state old_link_state = hba->uic_link_state;
>>> - hba->pm_op_in_progress = 1;
>>> - old_link_state = hba->uic_link_state;
>>> -
>>> - ufshcd_hba_vreg_set_hpm(hba);
>>> - ret = ufshcd_vreg_set_hpm(hba);
>>> - if (ret)
>>> - goto out;
>>> -
>>> - /* Make sure clocks are enabled before accessing controller */
>>> - ret = ufshcd_setup_clocks(hba, true);
>>> - if (ret)
>>> - goto disable_vreg;
>>> -
>>> - /* enable the host irq as host controller would be active soon */
>>> - ufshcd_enable_irq(hba);
>>> + hba->pm_op_in_progress = true;
>>> /*
>>> * Call vendor specific resume callback. As these callbacks may access
>>> @@ -8871,7 +8859,7 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>> */
>>> ret = ufshcd_vops_resume(hba, pm_op);
>>> if (ret)
>>> - goto disable_irq_and_vops_clks;
>>> + goto out;
>>> /* For DeepSleep, the only supported option is to have the link off */
>>> WARN_ON(ufshcd_is_ufs_dev_deepsleep(hba) && !ufshcd_is_link_off(hba));
>>> @@ -8916,31 +8904,147 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>> */
>>> ufshcd_urgent_bkops(hba);
>>> - hba->clk_gating.is_suspended = false;
>>> -
>>> - if (ufshcd_is_clkscaling_supported(hba))
>>> - ufshcd_clk_scaling_suspend(hba, false);
>>> -
>>> - /* Enable Auto-Hibernate if configured */
>>> - ufshcd_auto_hibern8_enable(hba);
>>> + if (hba->clk_scaling.is_allowed)
>>> + ufshcd_resume_clkscaling(hba);
>>> if (hba->dev_info.b_rpm_dev_flush_capable) {
>>> hba->dev_info.b_rpm_dev_flush_capable = false;
>>> cancel_delayed_work(&hba->rpm_dev_flush_recheck_work);
>>> }
>>> - ufshcd_clear_ua_wluns(hba);
>>> -
>>> - /* Schedule clock gating in case of no access to UFS device yet */
>>> - ufshcd_release(hba);
>>> -
>>> + /* Enable Auto-Hibernate if configured */
>>> + ufshcd_auto_hibern8_enable(hba);
>>> goto out;
>>> set_old_link_state:
>>> ufshcd_link_state_transition(hba, old_link_state, 0);
>>> vendor_suspend:
>>> ufshcd_vops_suspend(hba, pm_op);
>>> -disable_irq_and_vops_clks:
>>> +out:
>>> + if (ret)
>>> + ufshcd_update_evt_hist(hba, UFS_EVT_WL_RES_ERR, (u32)ret);
>>> + hba->clk_gating.is_suspended = false;
>>> + ufshcd_release(hba);
>>> + hba->pm_op_in_progress = false;
>>> + return ret;
>>> +}
>>> +
>>> +static int ufshcd_wl_runtime_suspend(struct device *dev)
>>> +{
>>> + struct scsi_device *sdev = to_scsi_device(dev);
>>> + struct ufs_hba *hba;
>>> + int ret;
>>> + ktime_t start = ktime_get();
>>> +
>>> + hba = shost_priv(sdev->host);
>>> +
>>> + ret = __ufshcd_wl_suspend(hba, UFS_RUNTIME_PM);
>>> + if (ret)
>>> + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret);
>>> +
>>> + trace_ufshcd_wl_runtime_suspend(dev_name(dev), ret,
>>> + ktime_to_us(ktime_sub(ktime_get(), start)),
>>> + hba->curr_dev_pwr_mode, hba->uic_link_state);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static int ufshcd_wl_runtime_resume(struct device *dev)
>>> +{
>>> + struct scsi_device *sdev = to_scsi_device(dev);
>>> + struct ufs_hba *hba;
>>> + int ret = 0;
>>> + ktime_t start = ktime_get();
>>> +
>>> + hba = shost_priv(sdev->host);
>>> +
>>> + ret = __ufshcd_wl_resume(hba, UFS_RUNTIME_PM);
>>> + if (ret)
>>> + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret);
>>> +
>>> + trace_ufshcd_wl_runtime_resume(dev_name(dev), ret,
>>> + ktime_to_us(ktime_sub(ktime_get(), start)),
>>> + hba->curr_dev_pwr_mode, hba->uic_link_state);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +#ifdef CONFIG_PM_SLEEP
>>> +static int ufshcd_wl_suspend(struct device *dev)
>>> +{
>>> + struct scsi_device *sdev = to_scsi_device(dev);
>>> + struct ufs_hba *hba;
>>> + int ret;
>>> + ktime_t start = ktime_get();
>>> +
>>> + hba = shost_priv(sdev->host);
>>> + ret = __ufshcd_wl_suspend(hba, UFS_SYSTEM_PM);
>>> + if (ret)
>>> + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret);
>>> +
>>> + trace_ufshcd_wl_suspend(dev_name(dev), ret,
>>> + ktime_to_us(ktime_sub(ktime_get(), start)),
>>> + hba->curr_dev_pwr_mode, hba->uic_link_state);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static int ufshcd_wl_resume(struct device *dev)
>>> +{
>>> + struct scsi_device *sdev = to_scsi_device(dev);
>>> + struct ufs_hba *hba;
>>> + int ret = 0;
>>> + ktime_t start = ktime_get();
>>> +
>>> + if (pm_runtime_suspended(dev))
>>> + return 0;
>>> + hba = shost_priv(sdev->host);
>>> +
>>> + ret = __ufshcd_wl_resume(hba, UFS_SYSTEM_PM);
>>> + if (ret)
>>> + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret);
>>> +
>>> + trace_ufshcd_wl_resume(dev_name(dev), ret,
>>> + ktime_to_us(ktime_sub(ktime_get(), start)),
>>> + hba->curr_dev_pwr_mode, hba->uic_link_state);
>>> +
>>> + return ret;
>>> +}
>>> +#endif
>>> +
>>> +static void ufshcd_wl_shutdown(struct device *dev)
>>> +{
>>> + struct scsi_device *sdev = to_scsi_device(dev);
>>> + struct ufs_hba *hba;
>>> +
>>> + hba = shost_priv(sdev->host);
>>> + /* Turn on everything while shutting down */
>>> + scsi_autopm_get_device(sdev);
>>> + scsi_device_quiesce(sdev);
>>> + shost_for_each_device(sdev, hba->host) {
>>> + if (sdev == hba->sdev_ufs_device)
>>> + continue;
>>> + scsi_device_quiesce(sdev);
>>> + }
>>> + __ufshcd_wl_suspend(hba, UFS_SHUTDOWN_PM);
>>> +}
>>> +
>>> +/**
>>> + * ufshcd_suspend - helper function for suspend operations
>>> + * @hba: per adapter instance
>>> + *
>>> + * This function will put disable irqs, turn off clocks
>>> + * and set vreg and hba-vreg in lpm mode.
>>> + * Also check the description of __ufshcd_wl_suspend().
>>> + */
>>> +static void ufshcd_suspend(struct ufs_hba *hba)
>>> +{
>>> + hba->pm_op_in_progress = 1;
>>> +
>>> + /*
>>> + * Disable the host irq as host controller as there won't be any
>>> + * host controller transaction expected till resume.
>>> + */
>>> ufshcd_disable_irq(hba);
>>> ufshcd_setup_clocks(hba, false);
>>> if (ufshcd_is_clkgating_allowed(hba)) {
>>> @@ -8948,6 +9052,43 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>> trace_ufshcd_clk_gating(dev_name(hba->dev),
>>> hba->clk_gating.state);
>>> }
>>> +
>>> + ufshcd_vreg_set_lpm(hba);
>>> + /* Put the host controller in low power mode if possible */
>>> + ufshcd_hba_vreg_set_lpm(hba);
>>> + hba->pm_op_in_progress = 0;
>>> +}
>>> +
>>> +/**
>>> + * ufshcd_resume - helper function for resume operations
>>> + * @hba: per adapter instance
>>> + *
>>> + * This function basically turns on the regulators, clocks and
>>> + * irqs of the hba.
>>> + * Also check the description of __ufshcd_wl_resume().
>>> + *
>>> + * Returns 0 for success and non-zero for failure
>>> + */
>>> +static int ufshcd_resume(struct ufs_hba *hba)
>>> +{
>>> + int ret;
>>> +
>>> + hba->pm_op_in_progress = 1;
>>> +
>>> + ufshcd_hba_vreg_set_hpm(hba);
>>> + ret = ufshcd_vreg_set_hpm(hba);
>>> + if (ret)
>>> + goto out;
>>> +
>>> + /* Make sure clocks are enabled before accessing controller */
>>> + ret = ufshcd_setup_clocks(hba, true);
>>> + if (ret)
>>> + goto disable_vreg;
>>> +
>>> + /* enable the host irq as host controller would be active soon */
>>> + ufshcd_enable_irq(hba);
>>> + goto out;
>>> +
>>> disable_vreg:
>>> ufshcd_vreg_set_lpm(hba);
>>> out:
>>> @@ -8962,6 +9103,7 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>>> * @hba: per adapter instance
>>> *
>>> * Check the description of ufshcd_suspend() function for more details.
>>> + * Also check the description of __ufshcd_wl_suspend().
>>> *
>>> * Returns 0 for success and non-zero for failure
>>> */
>>> @@ -8987,21 +9129,7 @@ int ufshcd_system_suspend(struct ufs_hba *hba)
>>> !hba->dev_info.b_rpm_dev_flush_capable)
>>> goto out;
>>> - if (pm_runtime_suspended(hba->dev)) {
>>> - /*
>>> - * UFS device and/or UFS link low power states during runtime
>>> - * suspend seems to be different than what is expected during
>>> - * system suspend. Hence runtime resume the devic & link and
>>> - * let the system suspend low power states to take effect.
>>> - * TODO: If resume takes longer time, we might have optimize
>>> - * it in future by not resuming everything if possible.
>>> - */
>>> - ret = ufshcd_runtime_resume(hba);
>>> - if (ret)
>>> - goto out;
>>> - }
>>> -
>>> - ret = ufshcd_suspend(hba, UFS_SYSTEM_PM);
>>> + ufshcd_suspend(hba);
>>> out:
>>> trace_ufshcd_system_suspend(dev_name(hba->dev), ret,
>>> ktime_to_us(ktime_sub(ktime_get(), start)),
>>> @@ -9023,7 +9151,6 @@ EXPORT_SYMBOL(ufshcd_system_suspend);
>>> int ufshcd_system_resume(struct ufs_hba *hba)
>>> {
>>> - int ret = 0;
>>> ktime_t start = ktime_get();
>>> if (!hba)
>>> @@ -9034,22 +9161,18 @@ int ufshcd_system_resume(struct ufs_hba *hba)
>>> down(&hba->host_sem);
>>> }
>>> - if (!hba->is_powered || pm_runtime_suspended(hba->dev))
>>> - /*
>>> - * Let the runtime resume take care of resuming
>>> - * if runtime suspended.
>>> - */
>>> + if (!hba->is_powered)
>>> goto out;
>>> else
>>> - ret = ufshcd_resume(hba, UFS_SYSTEM_PM);
>>> + ufshcd_resume(hba);
>>> out:
>>> - trace_ufshcd_system_resume(dev_name(hba->dev), ret,
>>> + trace_ufshcd_system_resume(dev_name(hba->dev), 0,
>>> ktime_to_us(ktime_sub(ktime_get(), start)),
>>> hba->curr_dev_pwr_mode, hba->uic_link_state);
>>> - if (!ret)
>>> - hba->is_sys_suspended = false;
>>> +
>>> + hba->is_sys_suspended = false;
>>> up(&hba->host_sem);
>>> - return ret;
>>> + return 0;
>>> }
>>> EXPORT_SYMBOL(ufshcd_system_resume);
>>> @@ -9058,12 +9181,12 @@ EXPORT_SYMBOL(ufshcd_system_resume);
>>> * @hba: per adapter instance
>>> *
>>> * Check the description of ufshcd_suspend() function for more details.
>>> + * Also check the description of __ufshcd_wl_suspend().
>>> *
>>> * Returns 0 for success and non-zero for failure
>>> */
>>> int ufshcd_runtime_suspend(struct ufs_hba *hba)
>>> {
>>> - int ret = 0;
>>> ktime_t start = ktime_get();
>>> if (!hba)
>>> @@ -9072,12 +9195,12 @@ int ufshcd_runtime_suspend(struct ufs_hba *hba)
>>> if (!hba->is_powered)
>>> goto out;
>>> else
>>> - ret = ufshcd_suspend(hba, UFS_RUNTIME_PM);
>>> + ufshcd_suspend(hba);
>>> out:
>>> - trace_ufshcd_runtime_suspend(dev_name(hba->dev), ret,
>>> + trace_ufshcd_runtime_suspend(dev_name(hba->dev), 0,
>>> ktime_to_us(ktime_sub(ktime_get(), start)),
>>> hba->curr_dev_pwr_mode, hba->uic_link_state);
>>> - return ret;
>>> + return 0;
>>> }
>>> EXPORT_SYMBOL(ufshcd_runtime_suspend);
>>> @@ -9085,26 +9208,14 @@ EXPORT_SYMBOL(ufshcd_runtime_suspend);
>>> * ufshcd_runtime_resume - runtime resume routine
>>> * @hba: per adapter instance
>>> *
>>> - * This function basically brings the UFS device, UniPro link and controller
>>> + * This function basically brings controller
>>> * to active state. Following operations are done in this function:
>>> *
>>> * 1. Turn on all the controller related clocks
>>> - * 2. Bring the UniPro link out of Hibernate state
>>> - * 3. If UFS device is in sleep state, turn ON VCC rail and bring the UFS device
>>> - * to active state.
>>> - * 4. If auto-bkops is enabled on the device, disable it.
>>> - *
>>> - * So following would be the possible power state after this function return
>>> - * successfully:
>>> - * S1: UFS device in Active state with VCC rail ON
>>> - * UniPro link in Active state
>>> - * All the UFS/UniPro controller clocks are ON
>>> - *
>>> - * Returns 0 for success and non-zero for failure
>>> + * 2. Turn ON VCC rail
>>> */
>>> int ufshcd_runtime_resume(struct ufs_hba *hba)
>>> {
>>> - int ret = 0;
>>> ktime_t start = ktime_get();
>>> if (!hba)
>>> @@ -9113,12 +9224,12 @@ int ufshcd_runtime_resume(struct ufs_hba *hba)
>>> if (!hba->is_powered)
>>> goto out;
>>> else
>>> - ret = ufshcd_resume(hba, UFS_RUNTIME_PM);
>>> + ufshcd_resume(hba);
>>> out:
>>> - trace_ufshcd_runtime_resume(dev_name(hba->dev), ret,
>>> + trace_ufshcd_runtime_resume(dev_name(hba->dev), 0,
>>> ktime_to_us(ktime_sub(ktime_get(), start)),
>>> hba->curr_dev_pwr_mode, hba->uic_link_state);
>>> - return ret;
>>> + return 0;
>>> }
>>> EXPORT_SYMBOL(ufshcd_runtime_resume);
>>> @@ -9132,14 +9243,13 @@ EXPORT_SYMBOL(ufshcd_runtime_idle);
>>> * ufshcd_shutdown - shutdown routine
>>> * @hba: per adapter instance
>>> *
>>> - * This function would power off both UFS device and UFS link.
>>> + * This function would turn off both UFS device and UFS hba
>>> + * regulators. It would also disable clocks.
>>> *
>>> * Returns 0 always to allow force shutdown even in case of errors.
>>> */
>>> int ufshcd_shutdown(struct ufs_hba *hba)
>>> {
>>> - int ret = 0;
>>> -
>>> down(&hba->host_sem);
>>> hba->shutting_down = true;
>>> up(&hba->host_sem);
>>> @@ -9152,10 +9262,8 @@ int ufshcd_shutdown(struct ufs_hba *hba)
>>> pm_runtime_get_sync(hba->dev);
>>> - ret = ufshcd_suspend(hba, UFS_SHUTDOWN_PM);
>>> + ufshcd_suspend(hba);
>>> out:
>>> - if (ret)
>>> - dev_err(hba->dev, "%s failed, err %d\n", __func__, ret);
>>> hba->is_powered = false;
>>> /* allow force shutdown even in case of errors */
>>> return 0;
>>> @@ -9477,15 +9585,163 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
>>> }
>>> EXPORT_SYMBOL_GPL(ufshcd_init);
>>> +void ufshcd_resume_complete(struct device *dev)
>>> +{
>>> + struct ufs_hba *hba = dev_get_drvdata(dev);
>>> +
>>> + pm_runtime_put_noidle(&hba->sdev_ufs_device->sdev_gendev);
>>> +}
>>> +EXPORT_SYMBOL_GPL(ufshcd_resume_complete);
>>> +
>>> +int ufshcd_suspend_prepare(struct device *dev)
>>> +{
>>> + struct ufs_hba *hba = dev_get_drvdata(dev);
>>> +
>>> + /*
>>> + * SCSI assumes that runtime-pm and system-pm for scsi drivers
>>> + * are same. And it doesn't wake up the device for system-suspend
>>> + * if it's runtime suspended. But ufs doesn't follow that.
>>> + * The rpm-lvl and spm-lvl can be different in ufs.
>>> + * Force it to honor system-suspend.
>>> + */
>>> + scsi_autopm_get_device(hba->sdev_ufs_device);
>>> + /* Refer ufshcd_resume_complete() */
>>> + pm_runtime_get_noresume(&hba->sdev_ufs_device->sdev_gendev);
>>> + scsi_autopm_put_device(hba->sdev_ufs_device);
>>> + return 0;
>>> +}
>>> +EXPORT_SYMBOL_GPL(ufshcd_suspend_prepare);
>>> +
>>> +#ifdef CONFIG_PM_SLEEP
>>> +static int ufshcd_wl_poweroff(struct device *dev)
>>> +{
>>> + ufshcd_wl_shutdown(dev);
>>> + return 0;
>>> +}
>>> +#endif
>>> +
>>> +static int ufshcd_wl_probe(struct device *dev)
>>> +{
>>> + return is_device_wlun(to_scsi_device(dev)) ? 0 : -ENODEV;
>>
>> The "ufs_device_wlun" driver owns PM for sdev_ufs_device because it
>> provides the dev_pm_ops. This is where the pm_runtime_allow() belongs
>> and it is symmetrical with the pm_runtime_forbid() in ufshcd_wl_remove().
>>
>> if (!is_device_wlun(to_scsi_device(dev)))
>> return -ENODEV;
>> blk_pm_runtime_init(dev);
>> pm_runtime_set_autosuspend_delay(dev, 0);
>> pm_runtime_allow(dev);
>>
>> Note sdev_ufs_device will not runtime suspend here unless the
>> device links have been added and all consumers have suspended.
>> That is handled separately by the pm_runtime_get_noresume() in
>> ufshcd_slave_configure() and the pm_runtime_put() when luns_avail == 1
>> in ufshcd_setup_links().
>>
>>> +}
>>> +
>>> +static int ufshcd_wl_remove(struct device *dev)
>>> +{
>>> + pm_runtime_forbid(dev);
>>> + return 0;
>>> +}
>>> +
>>> +static const struct dev_pm_ops ufshcd_wl_pm_ops = {
>>> +#ifdef CONFIG_PM_SLEEP
>>> + .suspend = ufshcd_wl_suspend,
>>> + .resume = ufshcd_wl_resume,
>>> + .freeze = ufshcd_wl_suspend,
>>> + .thaw = ufshcd_wl_resume,
>>> + .poweroff = ufshcd_wl_poweroff,
>>> + .restore = ufshcd_wl_resume,
>>> +#endif
>>> + SET_RUNTIME_PM_OPS(ufshcd_wl_runtime_suspend, ufshcd_wl_runtime_resume, NULL)
>>> +};
>>> +
>>> +/**
>>> + * ufs_dev_wlun_template - describes ufs device wlun
>>> + * ufs-device wlun - used to send pm commands
>>> + * All luns are consumers of ufs-device wlun.
>>> + *
>>> + * Currently, no sd driver is present for wluns.
>>> + * Hence the no specific pm operations are performed.
>>> + * With ufs design, SSU should be sent to ufs-device wlun.
>>> + * Hence register a scsi driver for ufs wluns only.
>>> + */
>>> +static struct scsi_driver ufs_dev_wlun_template = {
>>> + .gendrv = {
>>> + .name = "ufs_device_wlun",
>>> + .owner = THIS_MODULE,
>>> + .probe = ufshcd_wl_probe,
>>> + .remove = ufshcd_wl_remove,
>>> + .pm = &ufshcd_wl_pm_ops,
>>> + .shutdown = ufshcd_wl_shutdown,
>>> + },
>>> +};
>>> +
>>> +static int ufshcd_rpmb_probe(struct device *dev)
>>> +{
>>> + return is_rpmb_wlun(to_scsi_device(dev)) ? 0 : -ENODEV;
>>> +}
>>> +
>>> +static inline int ufshcd_clear_rpmb_uac(struct ufs_hba *hba)
>>> +{
>>> + int ret = 0;
>>> +
>>> + if (!hba->wlun_rpmb_clr_ua)
>>> + return 0;
>>> + ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN);
>>> + if (!ret)
>>> + hba->wlun_rpmb_clr_ua = 0;
>>> + return ret;
>>> +}
>>> +
>>> +static int ufshcd_rpmb_runtime_resume(struct device *dev)
>>> +{
>>> + struct ufs_hba *hba = wlun_dev_to_hba(dev);
>>> +
>>> + if (hba->sdev_rpmb)
>>> + return ufshcd_clear_rpmb_uac(hba);
>>> + return 0;
>>> +}
>>> +
>>> +static int ufshcd_rpmb_resume(struct device *dev)
>>> +{
>>> + struct ufs_hba *hba = wlun_dev_to_hba(dev);
>>> +
>>> + if (hba->sdev_rpmb && !pm_runtime_suspended(dev))
>>> + return ufshcd_clear_rpmb_uac(hba);
>>> + return 0;
>>> +}
>>> +
>>> +static const struct dev_pm_ops ufs_rpmb_pm_ops = {
>>> + SET_RUNTIME_PM_OPS(NULL, ufshcd_rpmb_runtime_resume, NULL)
>>> + SET_SYSTEM_SLEEP_PM_OPS(NULL, ufshcd_rpmb_resume)
>>> +};
>>> +
>>> +/**
>>> + * Describes the ufs rpmb wlun.
>>> + * Used only to send uac.
>>> + */
>>> +static struct scsi_driver ufs_rpmb_wlun_template = {
>>> + .gendrv = {
>>> + .name = "ufs_rpmb_wlun",
>>> + .owner = THIS_MODULE,
>>> + .probe = ufshcd_rpmb_probe,
>>> + .pm = &ufs_rpmb_pm_ops,
>>> + },
>>> +};
>>> +
>>> static int __init ufshcd_core_init(void)
>>> {
>>> + int ret;
>>> +
>>> ufs_debugfs_init();
>>> +
>>> + ret = scsi_register_driver(&ufs_dev_wlun_template.gendrv);
>>> + if (ret) {
>>> + ufs_debugfs_exit();
>>> + return ret;
>>> + }
>>> + ret = scsi_register_driver(&ufs_rpmb_wlun_template.gendrv);
>>> + if (ret) {
>>> + ufs_debugfs_exit();
>>> + scsi_unregister_driver(&ufs_dev_wlun_template.gendrv);
>>> + return ret;
>>> + }
>>> return 0;
>>> }
>>> static void __exit ufshcd_core_exit(void)
>>> {
>>> ufs_debugfs_exit();
>>> + scsi_unregister_driver(&ufs_dev_wlun_template.gendrv);
>>> + scsi_unregister_driver(&ufs_rpmb_wlun_template.gendrv);
>>> }
>>> module_init(ufshcd_core_init);
>>> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
>>> index ee61f82..7841b2a 100644
>>> --- a/drivers/scsi/ufs/ufshcd.h
>>> +++ b/drivers/scsi/ufs/ufshcd.h
>>> @@ -72,6 +72,8 @@ enum ufs_event_type {
>>> UFS_EVT_LINK_STARTUP_FAIL,
>>> UFS_EVT_RESUME_ERR,
>>> UFS_EVT_SUSPEND_ERR,
>>> + UFS_EVT_WL_SUSP_ERR,
>>> + UFS_EVT_WL_RES_ERR,
>>> /* abnormal events */
>>> UFS_EVT_DEV_RESET,
>>> @@ -804,6 +806,7 @@ struct ufs_hba {
>>> struct list_head clk_list_head;
>>> bool wlun_dev_clr_ua;
>>> + bool wlun_rpmb_clr_ua;
>>> /* Number of requests aborts */
>>> int req_abort_count;
>>> @@ -841,6 +844,7 @@ struct ufs_hba {
>>> #ifdef CONFIG_DEBUG_FS
>>> struct dentry *debugfs_root;
>>> #endif
>>> + u32 luns_avail;
>>> };
>>> /* Returns true if clocks can be gated. Otherwise false */
>>> @@ -1100,6 +1104,8 @@ int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba,
>>> enum query_opcode desc_op);
>>> int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable);
>>> +int ufshcd_suspend_prepare(struct device *dev);
>>> +void ufshcd_resume_complete(struct device *dev);
>>> /* Wrapper functions for safely calling variant operations */
>>> static inline const char *ufshcd_get_var_name(struct ufs_hba *hba)
>>> diff --git a/include/trace/events/ufs.h b/include/trace/events/ufs.h
>>> index e151477..d9d233b 100644
>>> --- a/include/trace/events/ufs.h
>>> +++ b/include/trace/events/ufs.h
>>> @@ -246,6 +246,26 @@ DEFINE_EVENT(ufshcd_template, ufshcd_init,
>>> int dev_state, int link_state),
>>> TP_ARGS(dev_name, err, usecs, dev_state, link_state));
>>> +DEFINE_EVENT(ufshcd_template, ufshcd_wl_suspend,
>>> + TP_PROTO(const char *dev_name, int err, s64 usecs,
>>> + int dev_state, int link_state),
>>> + TP_ARGS(dev_name, err, usecs, dev_state, link_state));
>>> +
>>> +DEFINE_EVENT(ufshcd_template, ufshcd_wl_resume,
>>> + TP_PROTO(const char *dev_name, int err, s64 usecs,
>>> + int dev_state, int link_state),
>>> + TP_ARGS(dev_name, err, usecs, dev_state, link_state));
>>> +
>>> +DEFINE_EVENT(ufshcd_template, ufshcd_wl_runtime_suspend,
>>> + TP_PROTO(const char *dev_name, int err, s64 usecs,
>>> + int dev_state, int link_state),
>>> + TP_ARGS(dev_name, err, usecs, dev_state, link_state));
>>> +
>>> +DEFINE_EVENT(ufshcd_template, ufshcd_wl_runtime_resume,
>>> + TP_PROTO(const char *dev_name, int err, s64 usecs,
>>> + int dev_state, int link_state),
>>> + TP_ARGS(dev_name, err, usecs, dev_state, link_state));
>>> +
>>> TRACE_EVENT(ufshcd_command,
>>> TP_PROTO(const char *dev_name, enum ufs_trace_str_t str_t,
>>> unsigned int tag, u32 doorbell, int transfer_len, u32 intr,
>>>
>>
>
>
More information about the linux-arm-kernel
mailing list