[PATCH v6 00/14] Add some DRM bridge drivers support for i.MX8qm/qxp SoCs
Marcel Ziswiler
marcel.ziswiler at toradex.com
Tue Mar 23 01:03:13 GMT 2021
Hi Liu
Some further discrepancy with them binding examples:
arch/arm64/boot/dts/freescale/imx8qxp.dtsi:335.9-36: Warning (reg_format): /dpu at 56180000:reg: property has
invalid length (8 bytes) (#address-cells == 2, #size-cells == 2)
arch/arm64/boot/dts/freescale/imx8qxp.dtsi:508.9-35: Warning (reg_format): /syscon at 56221000:reg: property has
invalid length (8 bytes) (#address-cells == 2, #size-cells == 2)
arch/arm64/boot/dts/freescale/imx8qxp.dtsi:601.9-34: Warning (reg_format): /phy at 56228300:reg: property has
invalid length (8 bytes) (#address-cells == 2, #size-cells == 2)
arch/arm64/boot/dts/freescale/imx8qxp.dtsi:613.9-36: Warning (reg_format): /pixel-combiner at 56020000:reg:
property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 2)
And with that I am unable to bring it up:
[ 1.714498] imx8qxp-ldb 5622100000001000.syscon:ldb: [drm:ldb_init_helper] *ERROR* failed to get regmap: -12
[ 1.724441] imx8qxp-ldb: probe of 5622100000001000.syscon:ldb failed with error -12
[ 1.734983] imx8qxp-pixel-combiner 5602000000010000.pixel-combiner: invalid resource
[ 1.742830] imx8qxp-pixel-combiner: probe of 5602000000010000.pixel-combiner failed with error -22
[ 1.754040] imx8qxp-display-pixel-link dc0-pixel-link0: [drm:imx8qxp_pixel_link_bridge_probe] *ERROR* failed
to get pixel link node alias id: -19
[ 1.769626] imx8qxp-pxl2dpi 5622100000001000.syscon:pxl2dpi: [drm:imx8qxp_pxl2dpi_bridge_probe] *ERROR*
failed to get regmap: -12
[ 1.781397] imx8qxp-pxl2dpi: probe of 5622100000001000.syscon:pxl2dpi failed with error -12
[ 1.840547] imx8qxp-lpcg-clk 59580000.clock-controller: deferred probe timeout, ignoring dependency
[ 1.840571] imx8qxp-lpcg-clk: probe of 59580000.clock-controller failed with error -110
Any suggestions welcome. Thanks!
Cheers
Marcel
On Wed, 2021-03-17 at 11:42 +0800, Liu Ying wrote:
> Hi,
>
> This is the v6 series to add some DRM bridge drivers support
> for i.MX8qm/qxp SoCs.
>
> The bridges may chain one by one to form display pipes to support
> LVDS displays. The relevant display controller is DPU embedded in
> i.MX8qm/qxp SoCs.
>
> The DPU KMS driver can be found at:
> https://www.spinics.net/lists/arm-kernel/msg878542.html
>
> This series supports the following display pipes:
> 1) i.MX8qxp:
> prefetch eng -> DPU -> pixel combiner -> pixel link ->
> pixel link to DPI(PXL2DPI) -> LVDS display bridge(LDB)
>
> 2) i.MX8qm:
> prefetch eng -> DPU -> pixel combiner -> pixel link -> LVDS display bridge(LDB)
>
>
> This series dropped the patch 'phy: Add LVDS configuration options', as
> suggested by Robert Foss, because it has already been sent with the following
> series to add Mixel combo PHY found in i.MX8qxp:
> https://www.spinics.net/lists/arm-kernel/msg879957.html
>
> So, this version depends on that series.
>
>
> Patch 1/14 and 2/14 add bus formats used by pixel combiner.
>
> Patch 7/14 adds dt-binding for Control and Status Registers module(a syscon
> used by PXL2DPI and LDB), which references the PXL2DPI and LDB schemas.
>
> Patch 10/14 adds a helper for LDB bridge drivers.
>
> Patch 3/14 ~ 6/14, 8/14, 9/14 and 11/14 ~ 13/14 add drm bridge drivers and
> dt-bindings support for the bridges.
>
> Patch 14/14 updates MAINTAINERS.
>
>
> I've tested this series with a koe,tx26d202vm0bwa dual link LVDS panel and
> a LVDS to HDMI bridge(with a downstream drm bridge driver).
>
>
> Welcome comments, thanks.
>
> v5->v6:
> * Fix data organizations in documentation(patch 2/14) for
> MEDIA_BUS_FMT_RGB{666,888}_1X30-CPADLO. (Laurent)
> * Add Laurent's R-b tags on patch 1/14 and 2/14.
> * Drop 'select' schema from the CSR dt-binding documentation(patch 7/14). (Rob)
> * Add Rob's R-b tag on patch 8/14.
>
> v4->v5:
> * Drop the patch 'phy: Add LVDS configuration options'. (Robert)
> * Add Robert's R-b tags on patch 1/14, 2/14, 4/14 and 6/14.
> * Drop the 'PC_BUF_PARA_REG' register definition from the pixel combiner bridge
> driver(patch 4/14). (Robert)
> * Make a comment occupy a line in the pixel link bridge driver(patch 6/14).
> (Robert)
> * Introduce a new patch(patch 7/14) to add dt-binding for Control and Status
> Registers module. (Rob)
> * Make imx-ldb-helper be a pure object to be linked with i.MX8qxp LDB bridge
> driver and i.MX8qm LDB bridge driver, instead of a module. Correspondingly,
> rename 'imx8{qm, qxp}-ldb.c' to 'imx8{qm, qxp}-ldb-drv.c'. (Robert)
> * Move 'imx_ldb_helper.h' to 'drivers/gpu/drm/bridge/imx/imx-ldb-helper.h'.
> (Robert)
> * s/__FSL_IMX_LDB__/__IMX_LDB_HELPER__/ for 'imx-ldb-helper.h'.
>
> v3->v4:
> * Use 'fsl,sc-resource' DT property to get the SCU resource ID associated with
> the PXL2DPI instance instead of using alias ID. (Rob)
> * Add Rob's R-b tag on patch 11/14.
>
> v2->v3:
> * Drop 'fsl,syscon' DT properties from fsl,imx8qxp-ldb.yaml and
> fsl,imx8qxp-pxl2dpi.yaml. (Rob)
> * Mention the CSR module controls LDB and PXL2DPI in fsl,imx8qxp-ldb.yaml and
> fsl,imx8qxp-pxl2dpi.yaml.
> * Call syscon_node_to_regmap() to get regmaps from LDB bridge helper driver
> and PXL2DPI bridger driver instead of syscon_regmap_lookup_by_phandle().
> * Drop two macros from pixel link bridge driver which help define functions
> and define them directly.
> * Properly disable all pixel link controls to POR value by calling
> imx8qxp_pixel_link_disable_all_controls() from
> imx8qxp_pixel_link_bridge_probe().
> * Add Rob's R-b tags on patch 4/14 and 6/14.
>
> v1->v2:
> * Rebase the series upon the latest drm-misc-next branch(5.11-rc2 based).
> * Use graph schema in the dt-bindings of the bridges. (Laurent)
> * Require all four pixel link output ports in fsl,imx8qxp-pixel-link.yaml.
> (Laurent)
> * Side note i.MX8qm/qxp LDB official name 'pixel mapper' in fsl,imx8qxp-ldb.yaml.
> (Laurent)
> * Mention pixel link is accessed via SCU firmware in fsl,imx8qxp-pixel-link.yaml.
> (Rob)
> * Use enum instead of oneOf + const for the reg property of pixel combiner
> channels in fsl,imx8qxp-pixel-combiner.yaml. (Rob)
> * Rewrite the function to find the next bridge in pixel link bridge driver
> by properly using OF APIs and dropping unnecessary DT validation. (Rob)
> * Drop unnecessary port availability check in i.MX8qxp pixel link to DPI
> bridge driver.
> * Drop unnecessary DT validation from i.MX8qxp LDB bridge driver.
> * Use of_graph_get_endpoint_by_regs() and of_graph_get_remote_endpoint() to
> get the input remote endpoint in imx8qxp_ldb_set_di_id() of i.MX8qxp LDB
> bridge driver.
> * Avoid using companion_port OF node after putting it in
> imx8qxp_ldb_parse_dt_companion() of i.MX8qxp LDB bridge driver.
> * Drop unnecessary check for maximum available LDB channels from
> i.MX8qm LDB bridge driver.
> * Mention i.MX8qm/qxp LDB official name 'pixel mapper' in i.MX8qm/qxp LDB
> bridge drivers and Kconfig help messages.
>
> Liu Ying (14):
> media: uapi: Add some RGB bus formats for i.MX8qm/qxp pixel combiner
> media: docs: Add some RGB bus formats for i.MX8qm/qxp pixel combiner
> dt-bindings: display: bridge: Add i.MX8qm/qxp pixel combiner binding
> drm/bridge: imx: Add i.MX8qm/qxp pixel combiner support
> dt-bindings: display: bridge: Add i.MX8qm/qxp display pixel link
> binding
> drm/bridge: imx: Add i.MX8qm/qxp display pixel link support
> dt-bindings: mfd: Add i.MX8qm/qxp Control and Status Registers module
> binding
> dt-bindings: display: bridge: Add i.MX8qxp pixel link to DPI binding
> drm/bridge: imx: Add i.MX8qxp pixel link to DPI support
> drm/bridge: imx: Add LDB driver helper support
> dt-bindings: display: bridge: Add i.MX8qm/qxp LVDS display bridge
> binding
> drm/bridge: imx: Add LDB support for i.MX8qxp
> drm/bridge: imx: Add LDB support for i.MX8qm
> MAINTAINERS: add maintainer for DRM bridge drivers for i.MX SoCs
>
> .../bindings/display/bridge/fsl,imx8qxp-ldb.yaml | 173 +++++
> .../display/bridge/fsl,imx8qxp-pixel-combiner.yaml | 144 +++++
> .../display/bridge/fsl,imx8qxp-pixel-link.yaml | 106 +++
> .../display/bridge/fsl,imx8qxp-pxl2dpi.yaml | 108 ++++
> .../devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml | 192 ++++++
> .../userspace-api/media/v4l/subdev-formats.rst | 156 +++++
> MAINTAINERS | 10 +
> drivers/gpu/drm/bridge/Kconfig | 2 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/imx/Kconfig | 42 ++
> drivers/gpu/drm/bridge/imx/Makefile | 9 +
> drivers/gpu/drm/bridge/imx/imx-ldb-helper.c | 232 +++++++
> drivers/gpu/drm/bridge/imx/imx-ldb-helper.h | 98 +++
> drivers/gpu/drm/bridge/imx/imx8qm-ldb-drv.c | 586 +++++++++++++++++
> drivers/gpu/drm/bridge/imx/imx8qxp-ldb-drv.c | 720 +++++++++++++++++++++
> .../gpu/drm/bridge/imx/imx8qxp-pixel-combiner.c | 448 +++++++++++++
> drivers/gpu/drm/bridge/imx/imx8qxp-pixel-link.c | 427 ++++++++++++
> drivers/gpu/drm/bridge/imx/imx8qxp-pxl2dpi.c | 485 ++++++++++++++
> include/uapi/linux/media-bus-format.h | 6 +-
> 19 files changed, 3944 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
> create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
> create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml
> create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
> create mode 100644 Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
> create mode 100644 drivers/gpu/drm/bridge/imx/Kconfig
> create mode 100644 drivers/gpu/drm/bridge/imx/Makefile
> create mode 100644 drivers/gpu/drm/bridge/imx/imx-ldb-helper.c
> create mode 100644 drivers/gpu/drm/bridge/imx/imx-ldb-helper.h
> create mode 100644 drivers/gpu/drm/bridge/imx/imx8qm-ldb-drv.c
> create mode 100644 drivers/gpu/drm/bridge/imx/imx8qxp-ldb-drv.c
> create mode 100644 drivers/gpu/drm/bridge/imx/imx8qxp-pixel-combiner.c
> create mode 100644 drivers/gpu/drm/bridge/imx/imx8qxp-pixel-link.c
> create mode 100644 drivers/gpu/drm/bridge/imx/imx8qxp-pxl2dpi.c
More information about the linux-arm-kernel
mailing list