[PATCH 06/13] usb: xhci-mtk: support ip-sleep wakeup for MT8183

[Sergei Shtylyov]

Hello!

On 22.03.2021 6:13, Chunfeng Yun wrote:

> Add support ip-sleep wakeup for MT8183, it's similar to MT8173,
              ^ for

> and it's also a specific one, but not follow IPM rule.

    Following?

> Due to the index 2 already used by many DTS, it's better to keep
> it unchanged for backward compatible, treat specific ones without

    Compatibility.

> following IPM rule as revision 1.x, meanwhile reserve 3~10 for
> later revision that follows the IPM rule.
> 
> Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
> ---
>   drivers/usb/host/xhci-mtk.c | 13 +++++++++++++
>   1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
> index 09f2ddbfe8b9..8ba1f914cb75 100644
> --- a/drivers/usb/host/xhci-mtk.c
> +++ b/drivers/usb/host/xhci-mtk.c
> @@ -57,12 +57,19 @@
>   #define CTRL_U2_FORCE_PLL_STB	BIT(28)
>   
>   /* usb remote wakeup registers in syscon */
> +
>   /* mt8173 etc */
>   #define PERI_WK_CTRL1	0x4
>   #define WC1_IS_C(x)	(((x) & 0xf) << 26)  /* cycle debounce */
>   #define WC1_IS_EN	BIT(25)
>   #define WC1_IS_P	BIT(6)  /* polarity for ip sleep */
>   
> +/* mt8183 */
> +#define PERI_WK_CTRL0	0x0
> +#define WC0_IS_C(x)	(((x) & 0xf) << 28)  /* cycle debounce */
> +#define WC0_IS_P	BIT(12)	/* polarity */
> +#define WC0_IS_EN	BIT(6)
> +
>   /* mt2712 etc */
>   #define PERI_SSUSB_SPM_CTRL	0x0
>   #define SSC_IP_SLEEP_EN	BIT(4)
> @@ -71,6 +78,7 @@
>   enum ssusb_uwk_vers {
>   	SSUSB_UWK_V1 = 1,
>   	SSUSB_UWK_V2,
> +	SSUSB_UWK_V11 = 11,	/* specific revision 1.1 */

    SSUSB_UWK_V1_1, maybe?

[...]

MBR, Sergei