[PATCH 2/2] arm64: dts: fsl-ls1028a-kontron-sl28: combine unused partitions

[Michael Walle]

The failsafe partitions for the DP firmware and for AT-F are unused. If
AT-F will ever be supported in the failsafe mode, then it will be a FIT
image. Thus fold the unused partitions into the failsafe bootloader one
to have enough storage if the bootloader image will grow.

While at it, remove the reserved partition. It served no purpose other
than having no hole in the map.

Signed-off-by: Michael Walle <michael at walle.cc>
---
 .../freescale/fsl-ls1028a-kontron-sl28.dts    | 20 +------------------
 1 file changed, 1 insertion(+), 19 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index 7e3a33eb2045..311e3aae0a3c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -135,29 +135,11 @@
 			};
 
 			partition at 10000 {
-				reg = <0x010000 0x0f0000>;
+				reg = <0x010000 0x1d0000>;
 				label = "failsafe bootloader";
 				read-only;
 			};
 
-			partition at 100000 {
-				reg = <0x100000 0x040000>;
-				label = "failsafe DP firmware";
-				read-only;
-			};
-
-			partition at 140000 {
-				reg = <0x140000 0x0a0000>;
-				label = "failsafe trusted firmware";
-				read-only;
-			};
-
-			partition at 1e0000 {
-				reg = <0x1e0000 0x020000>;
-				label = "reserved";
-				read-only;
-			};
-
 			partition at 200000 {
 				reg = <0x200000 0x010000>;
 				label = "configuration store";
-- 
2.20.1