[PATCH net-next 1/1] stmmac: intel: Add PSE and PCH PTP clock source selection
Ong Boon Leong
boon.leong.ong at intel.com
Wed Mar 17 01:32:47 GMT 2021
From: "Wong, Vee Khee" <vee.khee.wong at intel.com>
Intel mGbE variant implemented in EHL and TGL can be set to select
different clock frequency based on GPO bits in MAC_GPIO_STATUS register.
We introduce a new "void (*ptp_clk_freq_config)(void *priv)" in platform
data so that if a platform is required to configure the frequency of clock
source, in this case Intel mGBE does, the platform-specific configuration
of the PTP clock setting is done when stmmac_ptp_register() is called.
Signed-off-by: Wong, Vee Khee <vee.khee.wong at intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon at intel.com>
Co-developed-by: Ong Boon Leong <boon.leong.ong at intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong at intel.com>
---
.../net/ethernet/stmicro/stmmac/dwmac-intel.c | 46 +++++++++++++++++++
drivers/net/ethernet/stmicro/stmmac/dwmac4.h | 7 +++
.../net/ethernet/stmicro/stmmac/stmmac_ptp.c | 3 ++
include/linux/stmmac.h | 1 +
4 files changed, 57 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index c49646773871..763b549e3c2d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -12,8 +12,18 @@
#define INTEL_MGBE_ADHOC_ADDR 0x15
#define INTEL_MGBE_XPCS_ADDR 0x16
+/* Selection for PTP Clock Freq belongs to PSE & PCH GbE */
+#define PSE_PTP_CLK_FREQ_MASK (GMAC_GPO0 | GMAC_GPO3)
+#define PSE_PTP_CLK_FREQ_19_2MHZ (GMAC_GPO0)
+#define PSE_PTP_CLK_FREQ_200MHZ (GMAC_GPO0 | GMAC_GPO3)
+#define PSE_PTP_CLK_FREQ_256MHZ (0)
+#define PCH_PTP_CLK_FREQ_MASK (GMAC_GPO0)
+#define PCH_PTP_CLK_FREQ_19_2MHZ (GMAC_GPO0)
+#define PCH_PTP_CLK_FREQ_200MHZ (0)
+
struct intel_priv_data {
int mdio_adhoc_addr; /* mdio address for serdes & etc */
+ bool is_pse;
};
/* This struct is used to associate PCI Function of MAC controller on a board,
@@ -204,6 +214,32 @@ static void intel_serdes_powerdown(struct net_device *ndev, void *intel_data)
}
}
+/* Program PTP Clock Frequency for different variant of
+ * Intel mGBE that has slightly different GPO mapping
+ */
+static void intel_mgbe_ptp_clk_freq_config(void *npriv)
+{
+ struct stmmac_priv *priv = (struct stmmac_priv *)npriv;
+ struct intel_priv_data *intel_priv;
+ u32 gpio_value;
+
+ intel_priv = (struct intel_priv_data *)priv->plat->bsp_priv;
+
+ gpio_value = readl(priv->ioaddr + GMAC_GPIO_STATUS);
+
+ if (intel_priv->is_pse) {
+ /* For PSE GbE, use 200MHz */
+ gpio_value &= ~PSE_PTP_CLK_FREQ_MASK;
+ gpio_value |= PSE_PTP_CLK_FREQ_200MHZ;
+ } else {
+ /* For PCH GbE, use 200MHz */
+ gpio_value &= ~PCH_PTP_CLK_FREQ_MASK;
+ gpio_value |= PCH_PTP_CLK_FREQ_200MHZ;
+ }
+
+ writel(gpio_value, priv->ioaddr + GMAC_GPIO_STATUS);
+}
+
static void common_default_data(struct plat_stmmacenet_data *plat)
{
plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
@@ -322,6 +358,8 @@ static int intel_mgbe_common_data(struct pci_dev *pdev,
return ret;
}
+ plat->ptp_clk_freq_config = intel_mgbe_ptp_clk_freq_config;
+
/* Set default value for multicast hash bins */
plat->multicast_filter_bins = HASH_TABLE_SIZE;
@@ -391,8 +429,12 @@ static struct stmmac_pci_info ehl_rgmii1g_info = {
static int ehl_pse0_common_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
+ struct intel_priv_data *intel_priv = plat->bsp_priv;
+
+ intel_priv->is_pse = true;
plat->bus_id = 2;
plat->addr64 = 32;
+
return ehl_common_data(pdev, plat);
}
@@ -423,8 +465,12 @@ static struct stmmac_pci_info ehl_pse0_sgmii1g_info = {
static int ehl_pse1_common_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
+ struct intel_priv_data *intel_priv = plat->bsp_priv;
+
+ intel_priv->is_pse = true;
plat->bus_id = 3;
plat->addr64 = 32;
+
return ehl_common_data(pdev, plat);
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
index 82df91c130f7..ef8502d2b6e6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
@@ -42,6 +42,7 @@
#define GMAC_HW_FEATURE3 0x00000128
#define GMAC_MDIO_ADDR 0x00000200
#define GMAC_MDIO_DATA 0x00000204
+#define GMAC_GPIO_STATUS 0x0000020C
#define GMAC_ARP_ADDR 0x00000210
#define GMAC_ADDR_HIGH(reg) (0x300 + reg * 8)
#define GMAC_ADDR_LOW(reg) (0x304 + reg * 8)
@@ -278,6 +279,12 @@ enum power_event {
#define GMAC_HW_FEAT_DVLAN BIT(5)
#define GMAC_HW_FEAT_NRVF GENMASK(2, 0)
+/* GMAC GPIO Status reg */
+#define GMAC_GPO0 BIT(16)
+#define GMAC_GPO1 BIT(17)
+#define GMAC_GPO2 BIT(18)
+#define GMAC_GPO3 BIT(19)
+
/* MAC HW ADDR regs */
#define GMAC_HI_DCS GENMASK(18, 16)
#define GMAC_HI_DCS_SHIFT 16
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
index 0989e2bb6ee3..8b10fd10446f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
@@ -192,6 +192,9 @@ void stmmac_ptp_register(struct stmmac_priv *priv)
{
int i;
+ if (priv->plat->ptp_clk_freq_config)
+ priv->plat->ptp_clk_freq_config(priv);
+
for (i = 0; i < priv->dma_cap.pps_out_num; i++) {
if (i >= STMMAC_PPS_MAX)
break;
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 51004ebd0540..10abc80b601e 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -181,6 +181,7 @@ struct plat_stmmacenet_data {
void (*fix_mac_speed)(void *priv, unsigned int speed);
int (*serdes_powerup)(struct net_device *ndev, void *priv);
void (*serdes_powerdown)(struct net_device *ndev, void *priv);
+ void (*ptp_clk_freq_config)(void *priv);
int (*init)(struct platform_device *pdev, void *priv);
void (*exit)(struct platform_device *pdev, void *priv);
struct mac_device_info *(*setup)(void *priv);
--
2.25.1
More information about the linux-arm-kernel
mailing list