[PATCH v7 29/38] regulator: scmi: port driver to the new scmi_voltage_proto_ops interface
Cristian Marussi
cristian.marussi at arm.com
Tue Mar 16 12:48:54 GMT 2021
Port driver to the new SCMI Voltage interface based on protocol handles
and common devm_get_ops().
Cc: Mark Brown <broonie at kernel.org>
Acked-by: Mark Brown <broonie at kernel.org>
Signed-off-by: Cristian Marussi <cristian.marussi at arm.com>
---
v6 -> v7
- fixed Copyright
v4 --> v5
- using renamed devm_get/put_protocol
---
drivers/regulator/scmi-regulator.c | 42 ++++++++++++++++--------------
1 file changed, 23 insertions(+), 19 deletions(-)
diff --git a/drivers/regulator/scmi-regulator.c b/drivers/regulator/scmi-regulator.c
index 0e8b3caa8146..a38343f8c843 100644
--- a/drivers/regulator/scmi-regulator.c
+++ b/drivers/regulator/scmi-regulator.c
@@ -2,7 +2,7 @@
//
// System Control and Management Interface (SCMI) based regulator driver
//
-// Copyright (C) 2020 ARM Ltd.
+// Copyright (C) 2020-2021 ARM Ltd.
//
// Implements a regulator driver on top of the SCMI Voltage Protocol.
//
@@ -33,9 +33,12 @@
#include <linux/slab.h>
#include <linux/types.h>
+static const struct scmi_voltage_proto_ops *voltage_ops;
+
struct scmi_regulator {
u32 id;
struct scmi_device *sdev;
+ struct scmi_protocol_handle *ph;
struct regulator_dev *rdev;
struct device_node *of_node;
struct regulator_desc desc;
@@ -50,19 +53,17 @@ struct scmi_regulator_info {
static int scmi_reg_enable(struct regulator_dev *rdev)
{
struct scmi_regulator *sreg = rdev_get_drvdata(rdev);
- const struct scmi_handle *handle = sreg->sdev->handle;
- return handle->voltage_ops->config_set(handle, sreg->id,
- SCMI_VOLTAGE_ARCH_STATE_ON);
+ return voltage_ops->config_set(sreg->ph, sreg->id,
+ SCMI_VOLTAGE_ARCH_STATE_ON);
}
static int scmi_reg_disable(struct regulator_dev *rdev)
{
struct scmi_regulator *sreg = rdev_get_drvdata(rdev);
- const struct scmi_handle *handle = sreg->sdev->handle;
- return handle->voltage_ops->config_set(handle, sreg->id,
- SCMI_VOLTAGE_ARCH_STATE_OFF);
+ return voltage_ops->config_set(sreg->ph, sreg->id,
+ SCMI_VOLTAGE_ARCH_STATE_OFF);
}
static int scmi_reg_is_enabled(struct regulator_dev *rdev)
@@ -70,10 +71,8 @@ static int scmi_reg_is_enabled(struct regulator_dev *rdev)
int ret;
u32 config;
struct scmi_regulator *sreg = rdev_get_drvdata(rdev);
- const struct scmi_handle *handle = sreg->sdev->handle;
- ret = handle->voltage_ops->config_get(handle, sreg->id,
- &config);
+ ret = voltage_ops->config_get(sreg->ph, sreg->id, &config);
if (ret) {
dev_err(&sreg->sdev->dev,
"Error %d reading regulator %s status.\n",
@@ -89,9 +88,8 @@ static int scmi_reg_get_voltage_sel(struct regulator_dev *rdev)
int ret;
s32 volt_uV;
struct scmi_regulator *sreg = rdev_get_drvdata(rdev);
- const struct scmi_handle *handle = sreg->sdev->handle;
- ret = handle->voltage_ops->level_get(handle, sreg->id, &volt_uV);
+ ret = voltage_ops->level_get(sreg->ph, sreg->id, &volt_uV);
if (ret)
return ret;
@@ -103,13 +101,12 @@ static int scmi_reg_set_voltage_sel(struct regulator_dev *rdev,
{
s32 volt_uV;
struct scmi_regulator *sreg = rdev_get_drvdata(rdev);
- const struct scmi_handle *handle = sreg->sdev->handle;
volt_uV = sreg->desc.ops->list_voltage(rdev, selector);
if (volt_uV <= 0)
return -EINVAL;
- return handle->voltage_ops->level_set(handle, sreg->id, 0x0, volt_uV);
+ return voltage_ops->level_set(sreg->ph, sreg->id, 0x0, volt_uV);
}
static const struct regulator_ops scmi_reg_fixed_ops = {
@@ -204,11 +201,10 @@ scmi_config_discrete_regulator_mappings(struct scmi_regulator *sreg,
static int scmi_regulator_common_init(struct scmi_regulator *sreg)
{
int ret;
- const struct scmi_handle *handle = sreg->sdev->handle;
struct device *dev = &sreg->sdev->dev;
const struct scmi_voltage_info *vinfo;
- vinfo = handle->voltage_ops->info_get(handle, sreg->id);
+ vinfo = voltage_ops->info_get(sreg->ph, sreg->id);
if (!vinfo) {
dev_warn(dev, "Failure to get voltage domain %d\n",
sreg->id);
@@ -257,6 +253,7 @@ static int scmi_regulator_common_init(struct scmi_regulator *sreg)
}
static int process_scmi_regulator_of_node(struct scmi_device *sdev,
+ struct scmi_protocol_handle *ph,
struct device_node *np,
struct scmi_regulator_info *rinfo)
{
@@ -284,6 +281,7 @@ static int process_scmi_regulator_of_node(struct scmi_device *sdev,
rinfo->sregv[dom]->id = dom;
rinfo->sregv[dom]->sdev = sdev;
+ rinfo->sregv[dom]->ph = ph;
/* get hold of good nodes */
of_node_get(np);
@@ -302,11 +300,17 @@ static int scmi_regulator_probe(struct scmi_device *sdev)
struct device_node *np, *child;
const struct scmi_handle *handle = sdev->handle;
struct scmi_regulator_info *rinfo;
+ struct scmi_protocol_handle *ph;
- if (!handle || !handle->voltage_ops)
+ if (!handle)
return -ENODEV;
- num_doms = handle->voltage_ops->num_domains_get(handle);
+ voltage_ops = handle->devm_protocol_get(sdev,
+ SCMI_PROTOCOL_VOLTAGE, &ph);
+ if (IS_ERR(voltage_ops))
+ return PTR_ERR(voltage_ops);
+
+ num_doms = voltage_ops->num_domains_get(ph);
if (num_doms <= 0) {
if (!num_doms) {
dev_err(&sdev->dev,
@@ -341,7 +345,7 @@ static int scmi_regulator_probe(struct scmi_device *sdev)
*/
np = of_find_node_by_name(handle->dev->of_node, "regulators");
for_each_child_of_node(np, child) {
- ret = process_scmi_regulator_of_node(sdev, child, rinfo);
+ ret = process_scmi_regulator_of_node(sdev, ph, child, rinfo);
/* abort on any mem issue */
if (ret == -ENOMEM)
return ret;
--
2.17.1
More information about the linux-arm-kernel
mailing list