[PATCH 3/3] arm64: dts: renesas: falcon: Move AVB0 to main DTS

[Geert Uytterhoeven]

The Ethernet PHY for the first AVB instance is located on the Falcon
BreakOut board.  Hence move its description from the DTS file that
describes the CPU board to the main Falcon DTS file.

Fixes: e8ac55a5e70a9522 ("arm64: dts: renesas: falcon: Add Ethernet-AVB0 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
 .../boot/dts/renesas/r8a779a0-falcon-cpu.dtsi | 34 -----------------
 .../boot/dts/renesas/r8a779a0-falcon.dts      | 37 +++++++++++++++++++
 2 files changed, 37 insertions(+), 34 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
index 97d40e3e05ff3b1b..e9133f9348df8969 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
@@ -60,22 +60,6 @@ reg_3p3v: regulator-3p3v {
 	};
 };
 
-&avb0 {
-	pinctrl-0 = <&avb0_pins>;
-	pinctrl-names = "default";
-	phy-handle = <&phy0>;
-	tx-internal-delay-ps = <2000>;
-	status = "okay";
-
-	phy0: ethernet-phy at 0 {
-		rxc-skew-ps = <1500>;
-		reg = <0>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
-	};
-};
-
 &extal_clk {
 	clock-frequency = <16666666>;
 };
@@ -136,24 +120,6 @@ &pfc {
 	pinctrl-0 = <&scif_clk_pins>;
 	pinctrl-names = "default";
 
-	avb0_pins: avb0 {
-		mux {
-			groups = "avb0_link", "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
-			function = "avb0";
-		};
-
-		pins_mdio {
-			groups = "avb0_mdio";
-			drive-strength = <21>;
-		};
-
-		pins_mii {
-			groups = "avb0_rgmii";
-			drive-strength = <21>;
-		};
-
-	};
-
 	i2c0_pins: i2c0 {
 		groups = "i2c0";
 		function = "i2c0";
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
index 04cd2ae5b4f4892e..687f019e79f059a1 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
@@ -19,6 +19,22 @@ aliases {
 	};
 };
 
+&avb0 {
+	pinctrl-0 = <&avb0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	tx-internal-delay-ps = <2000>;
+	status = "okay";
+
+	phy0: ethernet-phy at 0 {
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+	};
+};
+
 &i2c0 {
 	eeprom at 51 {
 		compatible = "rohm,br24g01", "atmel,24c01";
@@ -27,3 +43,24 @@ eeprom at 51 {
 		pagesize = <8>;
 	};
 };
+
+&pfc {
+	avb0_pins: avb0 {
+		mux {
+			groups = "avb0_link", "avb0_mdio", "avb0_rgmii",
+				 "avb0_txcrefclk";
+			function = "avb0";
+		};
+
+		pins_mdio {
+			groups = "avb0_mdio";
+			drive-strength = <21>;
+		};
+
+		pins_mii {
+			groups = "avb0_rgmii";
+			drive-strength = <21>;
+		};
+
+	};
+};
-- 
2.25.1