[PATCH v4] ARM: imx7d-remarkable2.dts: Initial device tree for reMarkable2
Shawn Guo
shawnguo at kernel.org
Mon Mar 15 04:40:34 GMT 2021
On Mon, Mar 08, 2021 at 03:22:27AM -0500, Alistair Francis wrote:
> The reMarkable2 (https://remarkable.com) is an e-ink tablet based on
> the imx7d SoC.
>
> This commit is based on the DTS provide by reMarkable but ported to the
> latest kernel (instead of 4.14). I have removed references to
> non-upstream devices and have changed the UART so that the console can
> be accessed without having to open up the device via the OTG pogo pins.
>
> Currently the kernel boots, but there is no support for the display.
>
> WiFi is untested (no dispaly or UART RX makes it hard to test), but
> should work with the current upstream driver. As it's untested it's not
> included in this commit.
>
> Signed-off-by: Alistair Francis <alistair at alistair23.me>
The patch looks good, but it needs some split-up.
> ---
> .../devicetree/bindings/arm/fsl.yaml | 1 +
This would be patch #2.
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
Patch #1.
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx7d-remarkable2.dts | 166 ++++++++++++++++++
Patch #3.
Shawn
> 4 files changed, 170 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx7d-remarkable2.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index 297c87f45db8..d139440c86b6 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -617,6 +617,7 @@ properties:
> - kam,imx7d-flex-concentrator # Kamstrup OMNIA Flex Concentrator
> - kam,imx7d-flex-concentrator-mfg # Kamstrup OMNIA Flex Concentrator in manufacturing mode
> - novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board
> + - remarkable,imx7d-remarkable2 # i.MX7D ReMarkable 2 E-Ink Tablet
> - technexion,imx7d-pico-dwarf # TechNexion i.MX7D Pico-Dwarf
> - technexion,imx7d-pico-hobbit # TechNexion i.MX7D Pico-Hobbit
> - technexion,imx7d-pico-nymph # TechNexion i.MX7D Pico-Nymph
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> index f6064d84a424..a8e1e8d2ef20 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> @@ -932,6 +932,8 @@ patternProperties:
> description: Unisoc Communications, Inc.
> "^realtek,.*":
> description: Realtek Semiconductor Corp.
> + "^remarkable,.*":
> + description: reMarkable AS
> "^renesas,.*":
> description: Renesas Electronics Corporation
> "^rex,.*":
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 8e5d4ab4e75e..dc8e378689af 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -660,6 +660,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
> imx7d-pico-hobbit.dtb \
> imx7d-pico-nymph.dtb \
> imx7d-pico-pi.dtb \
> + imx7d-remarkable2.dtb \
> imx7d-sbc-imx7.dtb \
> imx7d-sdb.dtb \
> imx7d-sdb-reva.dtb \
> diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
> new file mode 100644
> index 000000000000..86d555bd33c2
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
> @@ -0,0 +1,166 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> + * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include "imx7d.dtsi"
> +
> +/ {
> + model = "reMarkable 2.0";
> + compatible = "remarkable,imx7d-remarkable2", "fsl,imx7d";
> +
> + chosen {
> + stdout-path = &uart6;
> + };
> +
> + memory {
> + reg = <0x80000000 0x40000000>;
> + };
> +};
> +
> +&clks {
> + assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
> + <&clks IMX7D_CLKO2_ROOT_DIV>;
> + assigned-clock-parents = <&clks IMX7D_CKIL>;
> + assigned-clock-rates = <0>, <32768>;
> +};
> +
> +&crypto {
> + status = "disabled";
> +};
> +
> +&dma_apbh {
> + status = "disabled";
> +};
> +
> +&sdma {
> + status = "okay";
> +};
> +
> +&snvs_pwrkey {
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
> + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
> + status = "okay";
> +};
> +
> +&uart6 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart6>;
> + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
> + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
> + status = "okay";
> +};
> +
> +&usbotg2 {
> + srp-disable;
> + hnp-disable;
> + status = "okay";
> +};
> +
> +&usdhc3 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
> + pinctrl-0 = <&pinctrl_usdhc3>;
> + pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
> + pinctrl-3 = <&pinctrl_usdhc3>;
> + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
> + assigned-clock-rates = <400000000>;
> + bus-width = <8>;
> + non-removable;
> + status = "okay";
> +};
> +
> +&wdog1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdog>;
> + fsl,ext-reset-output;
> +};
> +
> +&iomuxc_lpsr {
> + pinctrl_digitizer_reg: digitizerreggrp {
> + fsl,pins = <
> + /* DIGITIZER_PWR_EN */
> + MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x14
> + >;
> + };
> +};
> +
> +&iomuxc {
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
> + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
> + >;
> + };
> +
> + pinctrl_uart6: uart6grp {
> + fsl,pins = <
> + MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x79
> + MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x79
> + >;
> + };
> +
> + pinctrl_usdhc3: usdhc3grp {
> + fsl,pins = <
> + MX7D_PAD_SD3_CMD__SD3_CMD 0x59
> + MX7D_PAD_SD3_CLK__SD3_CLK 0x19
> + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
> + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
> + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
> + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
> + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
> + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
> + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
> + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
> + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19
> + >;
> + };
> +
> + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
> + fsl,pins = <
> + MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
> + MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
> + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a
> + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a
> + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a
> + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a
> + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a
> + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a
> + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a
> + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a
> + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a
> + >;
> + };
> +
> + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
> + fsl,pins = <
> + MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
> + MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
> + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b
> + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b
> + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b
> + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b
> + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b
> + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b
> + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b
> + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b
> + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b
> + >;
> + };
> +
> + pinctrl_wdog: wdoggrp {
> + fsl,pins = <
> + MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY 0x74
> + >;
> + };
> +};
> --
> 2.30.1
>
More information about the linux-arm-kernel
mailing list