[PATCH v3 2/2] rockchip: rk3399: Add support for FriendlyARM NanoPi R4S
Robin Murphy
robin.murphy at arm.com
Sat Mar 13 11:54:49 GMT 2021
On 2021-03-13 03:25, Tianling Shen wrote:
> This adds support for the NanoPi R4S from FriendlyArm.
>
> Rockchip RK3399 SoC
> 1GB DDR3 or 4GB LPDDR4 RAM
> Gigabit Ethernet (WAN)
> Gigabit Ethernet (PCIe) (LAN)
> USB 3.0 Port x 2
> MicroSD slot
> Reset button
> WAN - LAN - SYS LED
>
> [initial DTS file]
> Co-developed-by: Jensen Huang <jensenhuang at friendlyarm.com>
> Signed-off-by: Jensen Huang <jensenhuang at friendlyarm.com>
> [minor adjustments]
> Co-developed-by: Marty Jones <mj8263788 at gmail.com>
> Signed-off-by: Marty Jones <mj8263788 at gmail.com>
> [fixed format issues]
> Signed-off-by: Tianling Shen <cnsztl at gmail.com>
>
> Reported-by: kernel test robot <lkp at intel.com>
> ---
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> .../boot/dts/rockchip/rk3399-nanopi-r4s.dts | 179 ++++++++++++++++++
> 2 files changed, 180 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
>
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 62d3abc17a24..c3e00c0e2db7 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -36,6 +36,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4b.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-r4s.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
> new file mode 100644
> index 000000000000..41b3d5c5043c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
> @@ -0,0 +1,179 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * FriendlyElec NanoPC-T4 board device tree source
> + *
> + * Copyright (c) 2020 FriendlyElec Computer Tech. Co., Ltd.
> + * (http://www.friendlyarm.com)
> + *
> + * Copyright (c) 2018 Collabora Ltd.
> + *
> + * Copyright (c) 2020 Jensen Huang <jensenhuang at friendlyarm.com>
> + * Copyright (c) 2020 Marty Jones <mj8263788 at gmail.com>
> + * Copyright (c) 2021 Tianling Shen <cnsztl at gmail.com>
> + */
> +
> +/dts-v1/;
> +#include "rk3399-nanopi4.dtsi"
> +
> +/ {
> + model = "FriendlyElec NanoPi R4S";
> + compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
> +
> + /delete-node/ gpio-leds;
Why? You could justify deleting &status_led, but redefining the whole
node from scratch seems unnecessary.
> + gpio-leds {
> + compatible = "gpio-leds";
> + pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
> + pinctrl-names = "default";
> +
> + lan_led: led-0 {
> + gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
> + label = "nanopi-r4s:green:lan";
> + };
> +
> + sys_led: led-1 {
> + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
> + label = "nanopi-r4s:red:sys";
> + default-state = "on";
> + };
> +
> + wan_led: led-2 {
> + gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
> + label = "nanopi-r4s:green:wan";
> + };
> + };
> +
> + /delete-node/ gpio-keys;
Ditto - just removing the power key node itself should suffice.
> + gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&reset_button_pin>;
> +
> + reset {
> + debounce-interval = <50>;
> + gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
> + label = "reset";
> + linux,code = <KEY_RESTART>;
> + };
> + };
> +
> + vdd_5v: vdd-5v {
> + compatible = "regulator-fixed";
> + regulator-name = "vdd_5v";
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + fan: pwm-fan {
> + compatible = "pwm-fan";
> + /*
> + * With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels
> + * work out to 0, ~1200, ~3000, and 5000RPM respectively.
> + */
> + cooling-levels = <0 12 18 255>;
This is clearly not true - those numbers refer to a 12V fan on my
NanoPC-T4's 12V PWM circuit, while the output circuit here is 5V. If you
really want a placeholder here maybe just use <0 255>, or figure out
some empirical values with a suitable 5V fan that are actually meaningful.
> + #cooling-cells = <2>;
> + fan-supply = <&vdd_5v>;
> + pwms = <&pwm1 0 50000 0>;
> + };
> +};
> +
> +&cpu_thermal {
> + trips {
> + cpu_warm: cpu_warm {
> + temperature = <55000>;
> + hysteresis = <2000>;
> + type = "active";
> + };
> +
> + cpu_hot: cpu_hot {
> + temperature = <65000>;
> + hysteresis = <2000>;
> + type = "active";
> + };
> + };
> +
> + cooling-maps {
> + map2 {
> + trip = <&cpu_warm>;
> + cooling-device = <&fan THERMAL_NO_LIMIT 1>;
> + };
> +
> + map3 {
> + trip = <&cpu_hot>;
> + cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
> + };
> + };
> +};
> +
> +&emmc_phy {
> + status = "disabled";
> +};
> +
> +&fusb0 {
> + status = "disabled";
This can never be enabled since it doesn't exist in the design at all,
so it's one place where deletion *would* make good sense. AFAICS this
means you also don't need i2c4 enabled either.
> +};
It might be nice to disable HDMI and all the other display pieces given
that the board is physically headless.
> +
> +&pcie0 {
> + max-link-speed = <1>;
> + num-lanes = <1>;
> + vpcie3v3-supply = <&vcc3v3_sys>;
> +
> + pcie at 0 {
> + reg = <0x00000000 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + };
What's this for?
> +};
> +
> +&pinctrl {
> + /delete-node/ gpio-leds;
Again, at most you'd only need to delete &status_led_pin.
> + gpio-leds {
> + lan_led_pin: lan-led-pin {
> + rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + sys_led_pin: sys-led-pin {
> + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + wan_led_pin: wan-led-pin {
> + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + /delete-node/ rockchip-key;
Ditto for &power_key.
> + rockchip-key {
> + reset_button_pin: reset-button-pin {
> + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +};
> +
> +&sdhci {
> + status = "disabled";
> +};
> +
> +&sdio0 {
> + status = "disabled";
> +};
> +
> +&sdmmc {
> + sd-uhs-sdr12;
> + sd-uhs-sdr25;
> + sd-uhs-sdr50;
Are those modes unique to this particular board?
> +};
> +
What about the Bluetooth stuff on uart0?
Robin.
> +&u2phy0_host {
> + phy-supply = <&vdd_5v>;
> +};
> +
> +&u2phy1_host {
> + status = "disabled";
> +};
> +
> +&usbdrd_dwc3_0 {
> + dr_mode = "host";
> +};
> +
> +&vcc3v3_sys {
> + vin-supply = <&vcc5v0_sys>;
> +};
>
More information about the linux-arm-kernel
mailing list