[net-next PATCH v7 11/16] net: mdio: Add ACPI support code for mdio

[Andy Shevchenko]

On Thu, Mar 11, 2021 at 8:22 AM Calvin Johnson
<calvin.johnson at oss.nxp.com> wrote:
>
> Define acpi_mdiobus_register() to Register mii_bus and create PHYs for
> each ACPI child node.
>
> Signed-off-by: Calvin Johnson <calvin.johnson at oss.nxp.com>
> ---
>
> Changes in v7:
> - Include headers directly used in acpi_mdio.c
>
> Changes in v6:
> - use GENMASK() and ACPI_COMPANION_SET()
> - some cleanup
> - remove unwanted header inclusion
>
> Changes in v5:
> - add missing MODULE_LICENSE()
> - replace fwnode_get_id() with OF and ACPI function calls
>
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
>  MAINTAINERS                  |  1 +
>  drivers/net/mdio/Kconfig     |  7 +++++
>  drivers/net/mdio/Makefile    |  1 +
>  drivers/net/mdio/acpi_mdio.c | 56 ++++++++++++++++++++++++++++++++++++
>  include/linux/acpi_mdio.h    | 25 ++++++++++++++++
>  5 files changed, 90 insertions(+)
>  create mode 100644 drivers/net/mdio/acpi_mdio.c
>  create mode 100644 include/linux/acpi_mdio.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 146de41d2656..051377b7fa94 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6680,6 +6680,7 @@ F:        Documentation/devicetree/bindings/net/mdio*
>  F:     Documentation/devicetree/bindings/net/qca,ar803x.yaml
>  F:     Documentation/networking/phy.rst
>  F:     drivers/net/mdio/
> +F:     drivers/net/mdio/acpi_mdio.c
>  F:     drivers/net/mdio/fwnode_mdio.c
>  F:     drivers/net/mdio/of_mdio.c
>  F:     drivers/net/pcs/
> diff --git a/drivers/net/mdio/Kconfig b/drivers/net/mdio/Kconfig
> index 2d5bf5ccffb5..fc8c787b448f 100644
> --- a/drivers/net/mdio/Kconfig
> +++ b/drivers/net/mdio/Kconfig
> @@ -36,6 +36,13 @@ config OF_MDIO
>         help
>           OpenFirmware MDIO bus (Ethernet PHY) accessors
>
> +config ACPI_MDIO
> +       def_tristate PHYLIB

> +       depends on ACPI
> +       depends on PHYLIB

Same issue, they are no-ops.

I guess you have to surround OF and ACPI and FWNODE variants by

if PHYLIB
...
endif

This will be an equivalent to depends on PHYLIB

and put this into Makefile

ifneq ($(CONFIG_ACPI),)
obj-$(CONFIG_PHYLIB) += acpi_mdio.o
endif

This will give you the rest, i.e. default PHYLIB + depends on ACPI

Similar for OF

> +       help
> +         ACPI MDIO bus (Ethernet PHY) accessors
> +
>  if MDIO_BUS
>
>  config MDIO_DEVRES
> diff --git a/drivers/net/mdio/Makefile b/drivers/net/mdio/Makefile
> index ea5390e2ef84..e8b739a3df1c 100644
> --- a/drivers/net/mdio/Makefile
> +++ b/drivers/net/mdio/Makefile
> @@ -1,6 +1,7 @@
>  # SPDX-License-Identifier: GPL-2.0
>  # Makefile for Linux MDIO bus drivers
>
> +obj-$(CONFIG_ACPI_MDIO)                += acpi_mdio.o
>  obj-$(CONFIG_FWNODE_MDIO)      += fwnode_mdio.o
>  obj-$(CONFIG_OF_MDIO)          += of_mdio.o
>
> diff --git a/drivers/net/mdio/acpi_mdio.c b/drivers/net/mdio/acpi_mdio.c
> new file mode 100644
> index 000000000000..60a86e3fc246
> --- /dev/null
> +++ b/drivers/net/mdio/acpi_mdio.c
> @@ -0,0 +1,56 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * ACPI helpers for the MDIO (Ethernet PHY) API
> + *
> + * This file provides helper functions for extracting PHY device information
> + * out of the ACPI ASL and using it to populate an mii_bus.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/acpi_mdio.h>
> +#include <linux/bits.h>
> +#include <linux/dev_printk.h>
> +#include <linux/fwnode_mdio.h>
> +#include <linux/module.h>
> +#include <linux/types.h>
> +
> +MODULE_AUTHOR("Calvin Johnson <calvin.johnson at oss.nxp.com>");
> +MODULE_LICENSE("GPL");
> +
> +/**
> + * acpi_mdiobus_register - Register mii_bus and create PHYs from the ACPI ASL.
> + * @mdio: pointer to mii_bus structure
> + * @fwnode: pointer to fwnode of MDIO bus.
> + *
> + * This function registers the mii_bus structure and registers a phy_device
> + * for each child node of @fwnode.
> + */
> +int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
> +{
> +       struct fwnode_handle *child;
> +       u32 addr;
> +       int ret;
> +
> +       /* Mask out all PHYs from auto probing. */
> +       mdio->phy_mask = GENMASK(31, 0);
> +       ret = mdiobus_register(mdio);
> +       if (ret)
> +               return ret;
> +
> +       ACPI_COMPANION_SET(&mdio->dev, to_acpi_device_node(fwnode));
> +
> +       /* Loop over the child nodes and register a phy_device for each PHY */
> +       fwnode_for_each_child_node(fwnode, child) {
> +               ret = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), &addr);
> +               if (ret || addr >= PHY_MAX_ADDR)
> +                       continue;
> +
> +               ret = fwnode_mdiobus_register_phy(mdio, child, addr);
> +               if (ret == -ENODEV)
> +                       dev_err(&mdio->dev,
> +                               "MDIO device at address %d is missing.\n",
> +                               addr);
> +       }
> +       return 0;
> +}
> +EXPORT_SYMBOL(acpi_mdiobus_register);
> diff --git a/include/linux/acpi_mdio.h b/include/linux/acpi_mdio.h
> new file mode 100644
> index 000000000000..748d261fe2f9
> --- /dev/null
> +++ b/include/linux/acpi_mdio.h
> @@ -0,0 +1,25 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * ACPI helper for the MDIO (Ethernet PHY) API
> + */
> +
> +#ifndef __LINUX_ACPI_MDIO_H
> +#define __LINUX_ACPI_MDIO_H
> +
> +#include <linux/phy.h>
> +
> +#if IS_ENABLED(CONFIG_ACPI_MDIO)
> +int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode);
> +#else /* CONFIG_ACPI_MDIO */
> +static inline int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
> +{
> +       /*
> +        * Fall back to mdiobus_register() function to register a bus.
> +        * This way, we don't have to keep compat bits around in drivers.
> +        */
> +
> +       return mdiobus_register(mdio);
> +}
> +#endif
> +
> +#endif /* __LINUX_ACPI_MDIO_H */
> --
> 2.17.1
>


-- 
With Best Regards,
Andy Shevchenko