[PATCH 1/2] arm64: dts: ti: k3-am64-main: Add OSPI node

[Pratyush Yadav]

On 09/03/21 06:35PM, Vignesh Raghavendra wrote:
> AM64 SoC has a single Octal SPI (OSPI) instance under Flash SubSystem
> (FSS).  Add DT entry for the same.
> 
> Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com>

Reviewed-by: Pratyush Yadav <p.yadav at ti.com>

> ---
>  arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 25 ++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> index 5f85950daef7..bcec4fa444b5 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -402,4 +402,29 @@ sdhci1: mmc at fa00000 {
>  		ti,otap-del-sel-ddr50 = <0x9>;
>  		ti,clkbuf-sel = <0x7>;
>  	};
> +
> +	fss: bus at fc00000 {
> +		compatible = "simple-bus";
> +		reg = <0x00 0x0fc00000 0x00 0x70000>;
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		ospi0: spi at fc40000 {
> +			compatible = "ti,am654-ospi", "cdns,qspi-nor";
> +			reg = <0x00 0x0fc40000 0x00 0x100>,
> +			      <0x05 0x00000000 0x01 0x00000000>;
> +			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
> +			cdns,fifo-depth = <256>;
> +			cdns,fifo-width = <4>;
> +			cdns,trigger-address = <0x0>;
> +			#address-cells = <0x1>;
> +			#size-cells = <0x0>;
> +			clocks = <&k3_clks 75 6>;
> +			assigned-clocks = <&k3_clks 75 6>;
> +			assigned-clock-parents = <&k3_clks 75 7>;
> +			assigned-clock-rates = <166666666>;
> +			power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
> +		};
> +	};
>  };
> -- 
> 2.30.1
> 

-- 
Regards,
Pratyush Yadav
Texas Instruments Inc.