[PATCH v2 3/4] arm64: dts: imx8mp: add flexspi node

[Heiko Schocher]

add node for the flexspi modul on imx8mp.

Signed-off-by: Heiko Schocher <hs at denx.de>

---

Changes in v2:
- work in comments from Marco
  - add own compatible entry "nxp,imx8mp-fspi"
  - reworked order of properties as Marco mentioned

 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index c7523fd4eae9b..18023d97235ed 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -36,6 +36,7 @@ aliases {
 		serial1 = &uart2;
 		serial2 = &uart3;
 		serial3 = &uart4;
+		spi0 = &flexspi;
 	};
 
 	cpus {
@@ -744,6 +745,21 @@ usdhc3: mmc at 30b60000 {
 				status = "disabled";
 			};
 
+			flexspi: spi at 30bb0000 {
+				compatible = "nxp,imx8mp-fspi";
+				reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_QSPI_ROOT>,
+					 <&clk IMX8MP_CLK_QSPI_ROOT>;
+				clock-names = "fspi", "fspi_en";
+				assigned-clock-rates = <80000000>;
+				assigned-clocks = <&clk IMX8MP_CLK_QSPI>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			sdma1: dma-controller at 30bd0000 {
 				compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma";
 				reg = <0x30bd0000 0x10000>;
-- 
2.29.2