[PATCH v4 2/2] nPCI: brcmstb: Use reset/rearm instead of deassert/assert

[Jim Quinlan]

The Brcmstb PCIe RC uses a reset control "rescal" for certain chips.  This
reset implements a "pulse reset" so it matches more the reset/rearm
calls instead of the deassert/assert calls.

Also, add reset_control calls in suspend/resume functions.

Fixes: 740d6c3708a9 ("PCI: brcmstb: Add control of rescal reset")
Signed-off-by: Jim Quinlan <jim2101024 at gmail.com>
Acked-by: Florian Fainelli <f.fainelli at gmail.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index e330e6811f0b..18f23cba7e3a 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -1148,6 +1148,7 @@ static int brcm_pcie_suspend(struct device *dev)
 
 	brcm_pcie_turn_off(pcie);
 	ret = brcm_phy_stop(pcie);
+	reset_control_rearm(pcie->rescal);
 	clk_disable_unprepare(pcie->clk);
 
 	return ret;
@@ -1163,9 +1164,13 @@ static int brcm_pcie_resume(struct device *dev)
 	base = pcie->base;
 	clk_prepare_enable(pcie->clk);
 
+	ret = reset_control_reset(pcie->rescal);
+	if (ret)
+		goto err0;
+
 	ret = brcm_phy_start(pcie);
 	if (ret)
-		goto err;
+		goto err1;
 
 	/* Take bridge out of reset so we can access the SERDES reg */
 	pcie->bridge_sw_init_set(pcie, 0);
@@ -1180,14 +1185,16 @@ static int brcm_pcie_resume(struct device *dev)
 
 	ret = brcm_pcie_setup(pcie);
 	if (ret)
-		goto err;
+		goto err1;
 
 	if (pcie->msi)
 		brcm_msi_set_regs(pcie->msi);
 
 	return 0;
 
-err:
+err1:
+	reset_control_rearm(pcie->rescal);
+err0:
 	clk_disable_unprepare(pcie->clk);
 	return ret;
 }
@@ -1197,7 +1204,7 @@ static void __brcm_pcie_remove(struct brcm_pcie *pcie)
 	brcm_msi_remove(pcie);
 	brcm_pcie_turn_off(pcie);
 	brcm_phy_stop(pcie);
-	reset_control_assert(pcie->rescal);
+	reset_control_rearm(pcie->rescal);
 	clk_disable_unprepare(pcie->clk);
 }
 
@@ -1278,13 +1285,13 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 		return PTR_ERR(pcie->perst_reset);
 	}
 
-	ret = reset_control_deassert(pcie->rescal);
+	ret = reset_control_reset(pcie->rescal);
 	if (ret)
 		dev_err(&pdev->dev, "failed to deassert 'rescal'\n");
 
 	ret = brcm_phy_start(pcie);
 	if (ret) {
-		reset_control_assert(pcie->rescal);
+		reset_control_rearm(pcie->rescal);
 		clk_disable_unprepare(pcie->clk);
 		return ret;
 	}
-- 
2.17.1