[PATCH v2] ARM: dts: imx7d-mba7: Remove unsupported PCI properties

[Fabio Estevam]

disable-gpio' and 'power-on-gpio' are not valid properties
according to Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt.

Remove the unsupported properties.

Signed-off-by: Fabio Estevam <festevam at gmail.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen at gmail.com>
Reviewed-by: Matthias Schiffer <matthias.schiffer at ew.tq-group.com>
---
Changes since v1:
- Also remove 'power-on-gpio' - Matthias

 arch/arm/boot/dts/imx7d-mba7.dts | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx7d-mba7.dts b/arch/arm/boot/dts/imx7d-mba7.dts
index 5ef86de53013..23856a8d4b8c 100644
--- a/arch/arm/boot/dts/imx7d-mba7.dts
+++ b/arch/arm/boot/dts/imx7d-mba7.dts
@@ -99,8 +99,6 @@ &pcie {
 	/* probe deferral not supported */
 	/* pcie-bus-supply = <&reg_mpcie_1v5>; */
 	reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
-	disable-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;
-	power-on-gpio = <&gpio2 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
-- 
2.25.1