[PATCH 2/2] arm64: imx8mp: imx8mp-phycore-som enable spi nor

[Marco Felsch]

Hi Teresa, Heiko,

On 21-03-08 07:46, Teresa Remmet wrote:
> Hello Heiko,
> 
> first thanks for the patch :).
> 
> Am Montag, den 08.03.2021, 07:40 +0100 schrieb Heiko Schocher:
> > enable the mt25qu256aba spi nor on the imx8mp-phycore-som.
> > 
> > Signed-off-by: Heiko Schocher <hs at denx.de>
> > ---
> > 
> >  .../dts/freescale/imx8mp-phycore-som.dtsi     | 27
> > +++++++++++++++++++
> >  1 file changed, 27 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
> > index 44a8c2337cee4..0284e7a5c6bba 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
> > @@ -65,6 +65,22 @@ ethphy1: ethernet-phy at 0 {
> >  	};
> >  };
> >  
> > +&flexspi {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_flexspi0>;
> > +	status = "okay";
> > +
> > +	flash0: mt25qu256aba at 0 {
> 
> you can remove the label. As it is not used here right now.

I would keep the label since most the time the bootloaders will fixup
the device tree because they adding a of-partition to it. It's mostly
just a matter of time.

> Also rename the node name to device type like "flash" maybe.

+1

I would name it 'som_flash: flash at 0 { }'

Regards,
  Marco