[PATCHv1 1/4] ARM: dts: imx: ba16: add USB OTG VBUS enable GPIO

[Shawn Guo]

On Tue, Feb 23, 2021 at 07:33:43PM +0100, Sebastian Reichel wrote:
> Add VBUS regulator GPIO information, so that USB OTG port can
> also be used in host mode.
> 
> Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>

'ARM: dts: imx6q-ba16: ' this style for prefix maybe?

> ---
>  arch/arm/boot/dts/imx6q-ba16.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
> index e4578ed3371e..4793ef5171aa 100644
> --- a/arch/arm/boot/dts/imx6q-ba16.dtsi
> +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
> @@ -124,6 +124,10 @@ reg_usb_otg_vbus: regulator-usbotgvbus {
>  		regulator-name = "usb_otg_vbus";
>  		regulator-min-microvolt = <5000000>;
>  		regulator-max-microvolt = <5000000>;
> +

This is newline is not necessary.

Shawn

> +		pinctrl-0 = <&pinctrl_usbotg_vbus>;
> +		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
>  	};
>  };
>  
> @@ -575,6 +579,12 @@ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
>  		>;
>  	};
>  
> +	pinctrl_usbotg_vbus: usbotgvbusgrp {
> +		fsl,pins = <
> +			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
> +		>;
> +	};
> +
>  	pinctrl_usdhc2: usdhc2grp {
>  		fsl,pins = <
>  			MX6QDL_PAD_SD2_CMD__SD2_CMD	0x17059
> -- 
> 2.30.0
>