[PATCH v3 4/5] arch/arm64: dts: add support for Marvell CP110 UTMI driver

[Kostya Porotchkin]

This one sent by mistake, please ignore it.
There is another v3 4/5 that has a correct name.
Sorry for the mess.

Kosta

> -----Original Message-----
> From: kostap at marvell.com <kostap at marvell.com>
> Sent: Sunday, March 7, 2021 18:34
> To: linux-arm-kernel at lists.infradead.org; devicetree at vger.kernel.org; linux-
> kernel at vger.kernel.org
> Cc: lkundrak at v3.sk; linux at armlinux.org.uk;
> sebastian.hesselbarth at gmail.com; gregory.clement at bootlin.com;
> andrew at lunn.ch; robh+dt at kernel.org; vkoul at kernel.org; kishon at ti.com;
> miquel.raynal at bootlin.com; mw at semihalf.com; jaz at semihalf.com; Nadav
> Haklai <nadavh at marvell.com>; Stefan Chulski <stefanc at marvell.com>; Ben
> Peled <bpeled at marvell.com>; Kostya Porotchkin <kostap at marvell.com>
> Subject: [PATCH v3 4/5] arch/arm64: dts: add support for Marvell CP110 UTMI
> driver
> 
> From: Konstantin Porotchkin <kostap at marvell.com>
> 
> Add support for Marvell CP110 UTMI PHY  in a common DTSI
> 
> Signed-off-by: Konstantin Porotchkin <kostap at marvell.com>
> ---
>  arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> index 64179a372ecf..49f9d2cd8619 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
> @@ -285,6 +285,25 @@
>  			};
>  		};
> 
> +		CP11X_LABEL(utmi): utmi at 580000 {
> +			compatible = "marvell,cp110-utmi-phy";
> +			reg = <0x580000 0x2000>;
> +			marvell,system-controller =
> <&CP11X_LABEL(syscon0)>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +
> +			CP11X_LABEL(utmi0): usb-phy at 0 {
> +				reg = <0>;
> +				#phy-cells = <0>;
> +			};
> +
> +			CP11X_LABEL(utmi1): usb-phy at 1 {
> +				reg = <1>;
> +				#phy-cells = <0>;
> +			};
> +		};
> +
>  		CP11X_LABEL(usb3_0): usb at 500000 {
>  			compatible = "marvell,armada-8k-xhci",
>  			"generic-xhci";
> --
> 2.17.1