[PATCH 1/2] arm64: dts: juno: Describe PCI dma-ranges

[Robin Murphy]

The PLDA root complex on Juno relies on an address-based lookup table to
generate AXI attributes for inbound PCI transactions, and as such will
not pass any transaction not matching any programmed address range. The
standard firmware configuration programs 3 entries covering the GICv2m
MSI doorbell and the 2 DRAM regions, so add a "dma-ranges" property to
describe those usable inbound windows.

Signed-off-by: Robin Murphy <robin.murphy at arm.com>
---
 arch/arm64/boot/dts/arm/juno-base.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index f6c55877fbd9..b48a76b100b1 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -544,6 +544,10 @@
 		ranges = <0x01000000 0x00 0x00000000 0x00 0x5f800000 0x0 0x00800000>,
 			 <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
 			 <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
+		/* Standard AXI Translation entries as programmed by EDK2 */
+		dma-ranges = <0x02000000 0x0 0x2c1c0000 0x0 0x2c1c0000 0x0 0x00040000>,
+			     <0x02000000 0x0 0x80000000 0x0 0x80000000 0x0 0x80000000>,
+			     <0x43000000 0x8 0x00000000 0x8 0x00000000 0x2 0x00000000>;
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 7>;
 		interrupt-map = <0 0 0 1 &gic 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.17.1