[PATCH] ARM: dts: imx53-qsb: Describe the esdhc1 card detect pin

[Shawn Guo]

On Sat, Feb 13, 2021 at 10:41:55PM -0300, Fabio Estevam wrote:
> The micro SD card slot uses GPIO3_13 as card detect pin, so describe
> it in the devicetree.
> 
> This was noticed when converting imx53-qsb board to driver model
> in U-Boot as the micro SD card was not getting detected.
> 
> Signed-off-by: Fabio Estevam <festevam at gmail.com>

Applied, thanks.