[PATCH v2 07/13] serial: stm32: fix a deadlock in set_termios

[Erwan Le Ray]

CTS/RTS GPIOs support that has been added recently to STM32 UART driver has
introduced scheduled code in a set_termios part protected by a spin lock.
This generates a potential deadlock scenario:

Chain exists of:
&irq_desc_lock_class --> console_owner --> &port_lock_key

Possible unsafe locking scenario:

     CPU0                    CPU1
     ----                    ----
lock(&port_lock_key);
                           lock(console_owner);
                           lock(&port_lock_key);
lock(&irq_desc_lock_class);

*** DEADLOCK ***
4 locks held by stty/766:

Move the scheduled code after the spinlock.

Fixes: 6cf61b9bd7cc ("tty: serial: Add modem control gpio support for STM32 UART")
Signed-off-by: Erwan Le Ray <erwan.leray at foss.st.com>

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 326f300dd410..a381ee52168a 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -829,12 +829,6 @@ static void stm32_usart_set_termios(struct uart_port *port,
 		cr3 |= USART_CR3_CTSE | USART_CR3_RTSE;
 	}
 
-	/* Handle modem control interrupts */
-	if (UART_ENABLE_MS(port, termios->c_cflag))
-		stm32_usart_enable_ms(port);
-	else
-		stm32_usart_disable_ms(port);
-
 	usartdiv = DIV_ROUND_CLOSEST(port->uartclk, baud);
 
 	/*
@@ -916,6 +910,12 @@ static void stm32_usart_set_termios(struct uart_port *port,
 
 	stm32_usart_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit));
 	spin_unlock_irqrestore(&port->lock, flags);
+
+	/* Handle modem control interrupts */
+	if (UART_ENABLE_MS(port, termios->c_cflag))
+		stm32_usart_enable_ms(port);
+	else
+		stm32_usart_disable_ms(port);
 }
 
 static const char *stm32_usart_type(struct uart_port *port)
-- 
2.17.1