[PATCH v5 2/2] hwrng: bcm2835: add reset support

[Philipp Zabel]

On Thu, 2021-03-04 at 08:33 +0100, Álvaro Fernández Rojas wrote:
> BCM6368 devices need to reset the in order to generate true random numbers.
> This is what BCM6368 produces without a reset:
> root at OpenWrt:/# cat /dev/hwrng | rngtest -c 1000
> rngtest 6.10
> Copyright (c) 2004 by Henrique de Moraes Holschuh
> This is free software; see the source for copying conditions.  There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> 
> rngtest: starting FIPS tests...
> rngtest: bits received from input: 20000032
> rngtest: FIPS 140-2 successes: 0
> rngtest: FIPS 140-2 failures: 1000
> rngtest: FIPS 140-2(2001-10-10) Monobit: 2
> rngtest: FIPS 140-2(2001-10-10) Poker: 1000
> rngtest: FIPS 140-2(2001-10-10) Runs: 1000
> rngtest: FIPS 140-2(2001-10-10) Long run: 30
> rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
> rngtest: input channel speed: (min=37.253; avg=320.827; max=635.783)Mibits/s
> rngtest: FIPS tests speed: (min=12.141; avg=15.034; max=16.428)Mibits/s
> rngtest: Program run time: 1336176 microseconds
> cat: write error: Broken pipe
> 
> Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
> ---
>  v5: remove reset_control_rearm().

Reviewed-by: Philipp Zabel <p.zabel at pengutronix.de>

regards
Philipp