[PATCH v4 1/2] dt-bindings: serial: Add rx-tx-swap to stm32-usart

[Fabrice Gasnier]

On 3/2/21 8:03 PM, Martin Devera wrote:
> Add new rx-tx-swap property to allow for RX & TX pin swapping.
> 
> Signed-off-by: Martin Devera <devik at eaxlabs.cz>
> ---
>  .../devicetree/bindings/serial/st,stm32-uart.yaml  | 32 +++++++++++++++-------
>  1 file changed, 22 insertions(+), 10 deletions(-)
> 

Hi Martin,

I'm only wondering on moving the allOf and the st,hw-flow-ctrl prop. But
others may comment on this.

Feel free to add my:
Acked-by: Fabrice Gasnier <fabrice.gasnier at foss.st.com>

Thanks!
Fabrice

> diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
> index 8631678283f9..6eab2debebb5 100644
> --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
> +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
> @@ -9,9 +9,6 @@ maintainers:
>  
>  title: STMicroelectronics STM32 USART bindings
>  
> -allOf:
> -  - $ref: rs485.yaml
> -
>  properties:
>    compatible:
>      enum:
> @@ -40,6 +37,10 @@ properties:
>  
>    uart-has-rtscts: true
>  
> +  rx-tx-swap:
> +    type: boolean
> +    maxItems: 1
> +
>    dmas:
>      minItems: 1
>      maxItems: 2
> @@ -66,13 +67,24 @@ properties:
>    linux,rs485-enabled-at-boot-time: true
>    rs485-rx-during-tx: true
>  
> -if:
> -  required:
> -    - st,hw-flow-ctrl
> -then:
> -  properties:
> -    cts-gpios: false
> -    rts-gpios: false
> +allOf:
> +  - $ref: rs485.yaml
> +  - if:
> +      required:
> +        - st,hw-flow-ctrl
> +    then:
> +      properties:
> +        cts-gpios: false
> +        rts-gpios: false
> +  - if:
> +      required:
> +        - rx-tx-swap
> +    then:
> +      properties:
> +        compatible:
> +          enum:
> +            - st,stm32f7-uart
> +            - st,stm32h7-uart
>  
>  required:
>    - compatible
>