[RESEND 1/1] arch: arm: mach-at91: pm: Move prototypes to mutually included header

[Alexandre Belloni]

On 03/03/2021 12:41:49+0000, Lee Jones wrote:
> Both the caller and the supplier's source file should have access to
> the include file containing the prototypes.
> 
> Fixes the following W=1 kernel build warning(s):
> 
>  drivers/pinctrl/pinctrl-at91.c:1637:6: warning: no previous prototype for ‘at91_pinctrl_gpio_suspend’ [-Wmissing-prototypes]
>  1637 | void at91_pinctrl_gpio_suspend(void)
>  | ^~~~~~~~~~~~~~~~~~~~~~~~~
>  drivers/pinctrl/pinctrl-at91.c:1661:6: warning: no previous prototype for ‘at91_pinctrl_gpio_resume’ [-Wmissing-prototypes]
>  1661 | void at91_pinctrl_gpio_resume(void)
>  | ^~~~~~~~~~~~~~~~~~~~~~~~
> 
> Cc: Russell King <linux at armlinux.org.uk>
> Cc: Nicolas Ferre <nicolas.ferre at microchip.com>
> Cc: Alexandre Belloni <alexandre.belloni at bootlin.com>
> Cc: Ludovic Desroches <ludovic.desroches at microchip.com>
> Signed-off-by: Lee Jones <lee.jones at linaro.org>

I'm pretty sure you had my ack on v3 ;)

Acked-by: Alexandre Belloni <alexandre.belloni at bootlin.com>

or again, alternatively, I can apply it with Linus' ack

> ---
>  arch/arm/mach-at91/pm.c        | 19 ++++++++-----------
>  drivers/pinctrl/pinctrl-at91.c |  2 ++
>  include/soc/at91/pm.h          | 16 ++++++++++++++++
>  3 files changed, 26 insertions(+), 11 deletions(-)
>  create mode 100644 include/soc/at91/pm.h
> 
> diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
> index 120f9aa6fff32..90dcdfe3b3d0d 100644
> --- a/arch/arm/mach-at91/pm.c
> +++ b/arch/arm/mach-at91/pm.c
> @@ -17,6 +17,8 @@
>  #include <linux/clk/at91_pmc.h>
>  #include <linux/platform_data/atmel.h>
>  
> +#include <soc/at91/pm.h>
> +
>  #include <asm/cacheflush.h>
>  #include <asm/fncpy.h>
>  #include <asm/system_misc.h>
> @@ -25,17 +27,6 @@
>  #include "generic.h"
>  #include "pm.h"
>  
> -/*
> - * FIXME: this is needed to communicate between the pinctrl driver and
> - * the PM implementation in the machine. Possibly part of the PM
> - * implementation should be moved down into the pinctrl driver and get
> - * called as part of the generic suspend/resume path.
> - */
> -#ifdef CONFIG_PINCTRL_AT91
> -extern void at91_pinctrl_gpio_suspend(void);
> -extern void at91_pinctrl_gpio_resume(void);
> -#endif
> -
>  struct at91_soc_pm {
>  	int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity);
>  	int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity);
> @@ -326,6 +317,12 @@ static void at91_pm_suspend(suspend_state_t state)
>  static int at91_pm_enter(suspend_state_t state)
>  {
>  #ifdef CONFIG_PINCTRL_AT91
> +	/*
> +	 * FIXME: this is needed to communicate between the pinctrl driver and
> +	 * the PM implementation in the machine. Possibly part of the PM
> +	 * implementation should be moved down into the pinctrl driver and get
> +	 * called as part of the generic suspend/resume path.
> +	 */
>  	at91_pinctrl_gpio_suspend();
>  #endif
>  
> diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
> index 8003d1bd16953..fc61aaec34cc9 100644
> --- a/drivers/pinctrl/pinctrl-at91.c
> +++ b/drivers/pinctrl/pinctrl-at91.c
> @@ -23,6 +23,8 @@
>  /* Since we request GPIOs from ourself */
>  #include <linux/pinctrl/consumer.h>
>  
> +#include <soc/at91/pm.h>
> +
>  #include "pinctrl-at91.h"
>  #include "core.h"
>  
> diff --git a/include/soc/at91/pm.h b/include/soc/at91/pm.h
> new file mode 100644
> index 0000000000000..7a41e53a3ffa3
> --- /dev/null
> +++ b/include/soc/at91/pm.h
> @@ -0,0 +1,16 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Atmel Power Management
> + *
> + * Copyright (C) 2020 Atmel
> + *
> + * Author: Lee Jones <lee.jones at linaro.org>
> + */
> +
> +#ifndef __SOC_ATMEL_PM_H
> +#define __SOC_ATMEL_PM_H
> +
> +void at91_pinctrl_gpio_suspend(void);
> +void at91_pinctrl_gpio_resume(void);
> +
> +#endif /* __SOC_ATMEL_PM_H */
> -- 
> 2.27.0
> 

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com