[PATCH 1/1] clk: sunxi: Demote non-conformant kernel-doc headers

[Lee Jones]

Headers must describe their parameters.

Fixes the following W=1 kernel build warning(s):

 drivers/clk/sunxi/clk-sun9i-core.c:27: warning: Function parameter or member 'req' not described in 'sun9i_a80_get_pll4_factors'
 drivers/clk/sunxi/clk-sun9i-core.c:100: warning: Function parameter or member 'req' not described in 'sun9i_a80_get_gt_factors'
 drivers/clk/sunxi/clk-sun9i-core.c:155: warning: Function parameter or member 'req' not described in 'sun9i_a80_get_ahb_factors'
 drivers/clk/sunxi/clk-sun9i-core.c:235: warning: Function parameter or member 'req' not described in 'sun9i_a80_get_apb1_factors'
 drivers/clk/sunxi/clk-usb.c:22: warning: cannot understand function prototype: 'struct usb_reset_data '
 drivers/clk/sunxi/clk-sun6i-ar100.c:26: warning: Function parameter or member 'req' not described in 'sun6i_get_ar100_factors'

Cc: "Emilio López" <emilio at elopez.com.ar>
Cc: Michael Turquette <mturquette at baylibre.com>
Cc: Stephen Boyd <sboyd at kernel.org>
Cc: Maxime Ripard <mripard at kernel.org>
Cc: Chen-Yu Tsai <wens at csie.org>
Cc: Jernej Skrabec <jernej.skrabec at siol.net>
Cc: Boris BREZILLON <boris.brezillon at free-electrons.com>
Cc: linux-clk at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 drivers/clk/sunxi/clk-sun6i-ar100.c | 2 +-
 drivers/clk/sunxi/clk-sun9i-core.c  | 8 ++++----
 drivers/clk/sunxi/clk-usb.c         | 2 +-
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/sunxi/clk-sun6i-ar100.c b/drivers/clk/sunxi/clk-sun6i-ar100.c
index e1b7d0929cf7f..54babc2b4b9ee 100644
--- a/drivers/clk/sunxi/clk-sun6i-ar100.c
+++ b/drivers/clk/sunxi/clk-sun6i-ar100.c
@@ -16,7 +16,7 @@
 
 #include "clk-factors.h"
 
-/**
+/*
  * sun6i_get_ar100_factors - Calculates factors p, m for AR100
  *
  * AR100 rate is calculated as follows
diff --git a/drivers/clk/sunxi/clk-sun9i-core.c b/drivers/clk/sunxi/clk-sun9i-core.c
index 305ad78d5fb4f..d93c7a53c6c02 100644
--- a/drivers/clk/sunxi/clk-sun9i-core.c
+++ b/drivers/clk/sunxi/clk-sun9i-core.c
@@ -14,7 +14,7 @@
 #include "clk-factors.h"
 
 
-/**
+/*
  * sun9i_a80_get_pll4_factors() - calculates n, p, m factors for PLL4
  * PLL4 rate is calculated as follows
  * rate = (parent_rate * n >> p) / (m + 1);
@@ -90,7 +90,7 @@ static void __init sun9i_a80_pll4_setup(struct device_node *node)
 CLK_OF_DECLARE(sun9i_a80_pll4, "allwinner,sun9i-a80-pll4-clk", sun9i_a80_pll4_setup);
 
 
-/**
+/*
  * sun9i_a80_get_gt_factors() - calculates m factor for GT
  * GT rate is calculated as follows
  * rate = parent_rate / (m + 1);
@@ -145,7 +145,7 @@ static void __init sun9i_a80_gt_setup(struct device_node *node)
 CLK_OF_DECLARE(sun9i_a80_gt, "allwinner,sun9i-a80-gt-clk", sun9i_a80_gt_setup);
 
 
-/**
+/*
  * sun9i_a80_get_ahb_factors() - calculates p factor for AHB0/1/2
  * AHB rate is calculated as follows
  * rate = parent_rate >> p;
@@ -225,7 +225,7 @@ static void __init sun9i_a80_apb0_setup(struct device_node *node)
 CLK_OF_DECLARE(sun9i_a80_apb0, "allwinner,sun9i-a80-apb0-clk", sun9i_a80_apb0_setup);
 
 
-/**
+/*
  * sun9i_a80_get_apb1_factors() - calculates m, p factors for APB1
  * APB1 rate is calculated as follows
  * rate = (parent_rate >> p) / (m + 1);
diff --git a/drivers/clk/sunxi/clk-usb.c b/drivers/clk/sunxi/clk-usb.c
index d78a78495bede..5460218f3467a 100644
--- a/drivers/clk/sunxi/clk-usb.c
+++ b/drivers/clk/sunxi/clk-usb.c
@@ -15,7 +15,7 @@
 #include <linux/spinlock.h>
 
 
-/**
+/*
  * sunxi_usb_reset... - reset bits in usb clk registers handling
  */
 
-- 
2.27.0