[PATCH v2 0/7] Add I2S-MCC support for Microchip's SAMA7G5

[Codrin Ciubotariu]

SAMA7G5 includes an updated version of I2S-MCC, found previously on
SAM9X60. This controller includes 8 data pins, 4 for playback and 4 for
capture. For I2S and LEFT_J formats, these pins can be used to
send/receive up to 8 audio channels. For DSP_A, with TDM, any pins pair
(DIN/DOUT) from these 4 can be selected to send/receive data. This
version also includes 2 FIFOs (send and receive).
This patch set starts by moving the driver's bindings to yaml and
continues with adding a new compatible for the SAMA7G5 variant, followed
by the changes needed for I2S/LEFT_J support, TDM pin pair selection and
FIFO support, exclusively for SAMA7G5.

Changes in v2:
- moved DT binding conversion patch from the beginning to the end of the
  patch serieses
- patches that update the DT binding are modified to change .txt file
  instead of .yaml

Codrin Ciubotariu (7):
  dt-bindings: mchp,i2s-mcc: Add SAMA7G5 to binding
  ASoC: mchp-i2s-mcc: Add compatible for SAMA7G5
  ASoC: mchp-i2s-mcc: Add multi-channel support for I2S and LEFT_J
    formats
  dt-bindings: mchp,i2s-mcc: Add property to specify pin pair for TDM
  ASoC: mchp-i2s-mcc: Add support to select TDM pins
  ASoC: mchp-i2s-mcc: Add FIFOs support
  ASoC: convert Microchip I2SMCC binding to yaml

 .../bindings/sound/mchp,i2s-mcc.yaml          | 108 ++++++++++++
 .../bindings/sound/mchp-i2s-mcc.txt           |  43 -----
 sound/soc/atmel/Kconfig                       |   3 +
 sound/soc/atmel/mchp-i2s-mcc.c                | 161 +++++++++++++++---
 4 files changed, 252 insertions(+), 63 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml
 delete mode 100644 Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt

-- 
2.27.0