[PATCH] arm64: dts: allwinner: h6: Switch to macros for RSB clock/reset indices

[Chen-Yu Tsai]

From: Chen-Yu Tsai <wens at csie.org>

The macros for the clock and reset indices for the RSB hardware block
were replaced with raw numbers when the RSB controller node was added.
This was done to avoid cross-tree dependencies.

Now that both the clk and DT changes have been merged, we can switch
back to using the macros.

Fixes: aaad900757a6 ("arm64: dts: allwinner: h6: Add RSB controller node")
Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---

Small patch split out from the H6 RSB clock support patch.
This should be merged for v5.12.

---
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 49e979794094..af8b7d0ef750 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -995,9 +995,9 @@ r_rsb: rsb at 7083000 {
 			compatible = "allwinner,sun8i-a23-rsb";
 			reg = <0x07083000 0x400>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&r_ccu 13>;
+			clocks = <&r_ccu CLK_R_APB2_RSB>;
 			clock-frequency = <3000000>;
-			resets = <&r_ccu 7>;
+			resets = <&r_ccu RST_R_APB2_RSB>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&r_rsb_pins>;
 			status = "disabled";
-- 
2.30.1