[PATCH v2] ARM: dts: imx6qdl-sr-som: Increase the PHY reset duration to 10ms

[Russell King (Oracle)]

On Fri, Jun 25, 2021 at 02:13:53PM +0200, Maxime Chevallier wrote:
> The AR803x PHY used on this modules seems to require the reset line to
> be asserted for around 10ms in order to avoid rare cases where the PHY
> gets stuck in an incoherent state that prevents it to function
> correctly.
> 
> The previous value of 2ms was found to be problematic on some setups,
> causing intermittent issues where the PHY would be unresponsive
> every once in a while on some sytems, with a low occurrence (it typically
> took around 30 consecutive reboots to encounter the issue).
> 
> Bumping the delay to the 10ms makes the issue dissapear, with more than
> 2500 consecutive reboots performed without the issue showing-up.
> 
> Fixes: 208d7baf8085 ("ARM: imx: initial SolidRun HummingBoard support")
> Signed-off-by: Maxime Chevallier <maxime.chevallier at bootlin.com>
> Tested-by: Hervé Codina <herve.codina at bootlin.com>

Reviewed-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>

Thanks!

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!