[PATCH v2 0/4] J721E: Use external clock in EVM for SERDES

[Aswath Govindraju]

On 03/06/21 8:04 pm, Kishon Vijay Abraham I wrote:
> J721E EVM has clock generator that feeds both to the SERDES and to the
> PCIe slot present in the EVM. In order to use common reference clock on
> either side of the link, configure SERDES to use external reference
> clock.
> 
> Previously SERDES used internal reference clock and the attached device
> used clock from clock generator in the EVM.
> 
> Changes from v1:
> 1) Fixed clock names as suggested by Nishanth
> 2) Limit to < 100 lines
> 
> v1: http://lore.kernell.org/r/20210512151209.27560-1-kishon@ti.com
> 

For the whole series,

Reviewed-by: Aswath Govindraju <a-govindraju at ti.com>

Thanks,
Aswath

> Kishon Vijay Abraham I (4):
>   arm64: dts: ti: k3-j721e-main: Fix external refclk input to SERDES
>   arm64: dts: ti: k3-j721e-main: Add #clock-cells property to serdes DT
>     node
>   arm64: dts: ti: k3-j721e-common-proc-board: Use external clock for
>     SERDES
>   arm64: dts: ti: k3-j721e-common-proc-board: Re-name "link" name as
>     "phy"
> 
>  .../dts/ti/k3-j721e-common-proc-board.dts     | 52 ++++++++++-
>  arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 86 +++++++++++--------
>  2 files changed, 98 insertions(+), 40 deletions(-)
>