[PATCH V2 0/2] arm64: Initial support for Texas Instruments J721E EAIK

[Nishanth Menon]

On 15:03-20210607, Sinthu Raja wrote:
> From: Sinthu Raja <sinthu.raja at ti.com>
> 
> J721E EdgeAI Kit (EAIK) is a low cost, small form factor board designed
> for TI’s J721E SoC. This series intoduces the basic support for J721E
> EAIK
> 
> Changes in v2:
> - Fix for dt_binding_check error.
> - Modified base commit to the recent RC1.
> 
> Sinthu Raja (2):
>   dt-bindings: arm: ti: Add bindings for J721E EAIK
>   arm64: dts: ti: Add support for J721E EAIK
> 
>  .../devicetree/bindings/arm/ti/k3.yaml        |   2 +
>  .../bindings/remoteproc/ti,k3-dsp-rproc.yaml  |   2 +-
>  arch/arm64/boot/dts/ti/Makefile               |   2 +
>  arch/arm64/boot/dts/ti/k3-j721e-eaik.dts      | 342 ++++++++++++++++++
>  4 files changed, 347 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-eaik.dts
> 
> 
> base-commit: 6efb943b8616ec53a5e444193dccf1af9ad627b5


This might be a little too late for 5.14 window, i have provided
some basic comments on the same.

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D