[PATCH 3/3] ARM: dts: am33xx: Drop interrupt property from ecap nodes

[Lokesh Vutla]

Interrupts were never supported by ecap driver and the bindings
were never documented.Therefore drop the entries in preparation
to moving bindings to YAML schema.

Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
 arch/arm/boot/dts/am33xx-l4.dtsi | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index 6359416b0fa7..50c79e59eecb 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -2001,8 +2001,6 @@ ecap0: pwm at 100 {
 					reg = <0x100 0x80>;
 					clocks = <&l4ls_gclk>;
 					clock-names = "fck";
-					interrupts = <31>;
-					interrupt-names = "ecap0";
 					status = "disabled";
 				};
 
@@ -2060,8 +2058,6 @@ ecap1: pwm at 100 {
 					reg = <0x100 0x80>;
 					clocks = <&l4ls_gclk>;
 					clock-names = "fck";
-					interrupts = <47>;
-					interrupt-names = "ecap1";
 					status = "disabled";
 				};
 
@@ -2119,8 +2115,6 @@ ecap2: pwm at 100 {
 					reg = <0x100 0x80>;
 					clocks = <&l4ls_gclk>;
 					clock-names = "fck";
-					interrupts = <61>;
-					interrupt-names = "ecap2";
 					status = "disabled";
 				};
 
-- 
2.31.1