[PATCH v5 09/13] KVM: arm64: Allow userspace to configure a vCPU's virtual offset
Marc Zyngier
maz at kernel.org
Fri Jul 30 03:12:02 PDT 2021
On Thu, 29 Jul 2021 18:32:56 +0100,
Oliver Upton <oupton at google.com> wrote:
>
> Add a new vCPU attribute that allows userspace to directly manipulate
> the virtual counter-timer offset. Exposing such an interface allows for
> the precise migration of guest virtual counter-timers, as it is an
> indepotent interface.
>
> Uphold the existing behavior of writes to CNTVOFF_EL2 for this new
> interface, wherein a write to a single vCPU is broadcasted to all vCPUs
> within a VM.
>
> Reviewed-by: Andrew Jones <drjones at redhat.com>
> Signed-off-by: Oliver Upton <oupton at google.com>
> ---
> Documentation/virt/kvm/devices/vcpu.rst | 22 ++++++++
> arch/arm64/include/uapi/asm/kvm.h | 1 +
> arch/arm64/kvm/arch_timer.c | 68 ++++++++++++++++++++++++-
> 3 files changed, 89 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/virt/kvm/devices/vcpu.rst b/Documentation/virt/kvm/devices/vcpu.rst
> index 0f46f2588905..ecbab7adc602 100644
> --- a/Documentation/virt/kvm/devices/vcpu.rst
> +++ b/Documentation/virt/kvm/devices/vcpu.rst
> @@ -139,6 +139,28 @@ configured values on other VCPUs. Userspace should configure the interrupt
> numbers on at least one VCPU after creating all VCPUs and before running any
> VCPUs.
>
> +2.2. ATTRIBUTE: KVM_ARM_VCPU_TIMER_OFFSET_VTIMER
> +------------------------------------------------
> +
> +:Parameters: Pointer to a 64-bit unsigned counter-timer offset.
> +
> +Returns:
> +
> + ======= ======================================
> + -EFAULT Error reading/writing the provided
> + parameter address
> + -ENXIO Attribute not supported
> + ======= ======================================
> +
> +Specifies the guest's virtual counter-timer offset from the host's
> +virtual counter. The guest's virtual counter is then derived by
> +the following equation:
> +
> + guest_cntvct = host_cntvct - KVM_ARM_VCPU_TIMER_OFFSET_VTIMER
I still have a problem with this, specially as you later introduce a
physical timer offset. My gut feeling is that the virtual offset
should be relative to the physical counter *of the guest*, and not
that of the host. The physical offset should be the only one that is
relative to the host. Anything else should be deriving from it.
If you don't set the ptimer offset, then the two definitions are
strictly identical. It will also match the definition of a
userspace-visible CNTVOFF_EL2 with NV, which is strictly relative to
the guest view of the physical counter.
> +
> +KVM does not allow the use of varying offset values for different vCPUs;
> +the last written offset value will be broadcasted to all vCPUs in a VM.
> +
Please document the effects of this attribute w.r.t. writing
CNTVCT_EL0 from userspace.
> 3. GROUP: KVM_ARM_VCPU_PVTIME_CTRL
> ==================================
>
> diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
> index b3edde68bc3e..008d0518d2b1 100644
> --- a/arch/arm64/include/uapi/asm/kvm.h
> +++ b/arch/arm64/include/uapi/asm/kvm.h
> @@ -365,6 +365,7 @@ struct kvm_arm_copy_mte_tags {
> #define KVM_ARM_VCPU_TIMER_CTRL 1
> #define KVM_ARM_VCPU_TIMER_IRQ_VTIMER 0
> #define KVM_ARM_VCPU_TIMER_IRQ_PTIMER 1
> +#define KVM_ARM_VCPU_TIMER_OFFSET_VTIMER 2
> #define KVM_ARM_VCPU_PVTIME_CTRL 2
> #define KVM_ARM_VCPU_PVTIME_IPA 0
>
> diff --git a/arch/arm64/kvm/arch_timer.c b/arch/arm64/kvm/arch_timer.c
> index 3df67c127489..d2b1b13af658 100644
> --- a/arch/arm64/kvm/arch_timer.c
> +++ b/arch/arm64/kvm/arch_timer.c
> @@ -1305,7 +1305,7 @@ static void set_timer_irqs(struct kvm *kvm, int vtimer_irq, int ptimer_irq)
> }
> }
>
> -int kvm_arm_timer_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
> +int kvm_arm_timer_set_attr_irq(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
> {
> int __user *uaddr = (int __user *)(long)attr->addr;
> struct arch_timer_context *vtimer = vcpu_vtimer(vcpu);
> @@ -1338,7 +1338,39 @@ int kvm_arm_timer_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
> return 0;
> }
>
> -int kvm_arm_timer_get_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
> +int kvm_arm_timer_set_attr_offset(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
> +{
> + u64 __user *uaddr = (u64 __user *)(long)attr->addr;
> + u64 offset;
> +
> + if (get_user(offset, uaddr))
> + return -EFAULT;
> +
> + switch (attr->attr) {
> + case KVM_ARM_VCPU_TIMER_OFFSET_VTIMER:
> + update_vtimer_cntvoff(vcpu, offset);
Probably not a good idea if the timer is already enabled on any of the
CPUs (we probably already have that problem, so let's fix it once and
for all).
> + break;
> + default:
> + return -ENXIO;
> + }
> +
> + return 0;
> +}
> +
> +int kvm_arm_timer_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
> +{
> + switch (attr->attr) {
> + case KVM_ARM_VCPU_TIMER_IRQ_VTIMER:
> + case KVM_ARM_VCPU_TIMER_IRQ_PTIMER:
> + return kvm_arm_timer_set_attr_irq(vcpu, attr);
> + case KVM_ARM_VCPU_TIMER_OFFSET_VTIMER:
> + return kvm_arm_timer_set_attr_offset(vcpu, attr);
> + }
> +
> + return -ENXIO;
> +}
> +
> +int kvm_arm_timer_get_attr_irq(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
> {
> int __user *uaddr = (int __user *)(long)attr->addr;
> struct arch_timer_context *timer;
> @@ -1359,11 +1391,43 @@ int kvm_arm_timer_get_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
> return put_user(irq, uaddr);
> }
>
> +int kvm_arm_timer_get_attr_offset(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
> +{
> + u64 __user *uaddr = (u64 __user *)(long)attr->addr;
> + struct arch_timer_context *timer;
> + u64 offset;
> +
> + switch (attr->attr) {
> + case KVM_ARM_VCPU_TIMER_OFFSET_VTIMER:
> + timer = vcpu_vtimer(vcpu);
> + break;
> + default:
> + return -ENXIO;
What is the rational for retrieving this offset the first place? I
don't dislike the symmetry, but we already have an architectural way
of getting it (read the counter registers).
> + }
> +
> + offset = timer_get_offset(timer);
> + return put_user(offset, uaddr);
> +}
> +
> +int kvm_arm_timer_get_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
> +{
> + switch (attr->attr) {
> + case KVM_ARM_VCPU_TIMER_IRQ_VTIMER:
> + case KVM_ARM_VCPU_TIMER_IRQ_PTIMER:
> + return kvm_arm_timer_get_attr_irq(vcpu, attr);
> + case KVM_ARM_VCPU_TIMER_OFFSET_VTIMER:
> + return kvm_arm_timer_get_attr_offset(vcpu, attr);
> + }
> +
> + return -ENXIO;
> +}
> +
> int kvm_arm_timer_has_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
> {
> switch (attr->attr) {
> case KVM_ARM_VCPU_TIMER_IRQ_VTIMER:
> case KVM_ARM_VCPU_TIMER_IRQ_PTIMER:
> + case KVM_ARM_VCPU_TIMER_OFFSET_VTIMER:
> return 0;
> }
>
Thanks,
M.
--
Without deviation from the norm, progress is not possible.
More information about the linux-arm-kernel
mailing list