[v3 3/5] soc: mediatek: pm-domains: Add support for mt8195
Chen-Yu Tsai
wenst at chromium.org
Thu Jul 29 21:20:24 PDT 2021
On Fri, Jul 30, 2021 at 11:13 AM Chun-Jie Chen
<chun-jie.chen at mediatek.com> wrote:
>
> On Tue, 2021-07-20 at 16:51 +0800, Chen-Yu Tsai wrote:
> > Hi,
> > On Mon, Jul 5, 2021 at 1:42 PM Chun-Jie Chen <
> > chun-jie.chen at mediatek.com> wrote:
> > >
> > > Add domain control data including bus protection data size
> > > change due to more protection steps in mt8195.
> > >
> > > Signed-off-by: Chun-Jie Chen <chun-jie.chen at mediatek.com>
> > > ---
> > > drivers/soc/mediatek/mt8195-pm-domains.h | 738
> > > +++++++++++++++++++++++
> > > drivers/soc/mediatek/mtk-pm-domains.c | 5 +
> > > drivers/soc/mediatek/mtk-pm-domains.h | 2 +-
> > > include/linux/soc/mediatek/infracfg.h | 103 ++++
> > > 4 files changed, 847 insertions(+), 1 deletion(-)
> > > create mode 100644 drivers/soc/mediatek/mt8195-pm-domains.h
> > >
> > > diff --git a/drivers/soc/mediatek/mt8195-pm-domains.h
> > > b/drivers/soc/mediatek/mt8195-pm-domains.h
> > > new file mode 100644
> > > index 000000000000..54bb7af8e9a3
> > > --- /dev/null
> > > +++ b/drivers/soc/mediatek/mt8195-pm-domains.h
> > > @@ -0,0 +1,738 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > +/*
> > > + * Copyright (c) 2021 MediaTek Inc.
> > > + * Author: Chun-Jie Chen <chun-jie.chen at mediatek.com>
> > > + */
> > > +
> > > +#ifndef __SOC_MEDIATEK_MT8195_PM_DOMAINS_H
> > > +#define __SOC_MEDIATEK_MT8195_PM_DOMAINS_H
> > > +
> > > +#include "mtk-pm-domains.h"
> > > +#include <dt-bindings/power/mt8195-power.h>
> > > +
> > > +/*
> > > + * MT8195 power domain support
> > > + */
> > > +
> > > +static const struct scpsys_domain_data scpsys_domain_data_mt8195[]
> > > = {
> >
> > The SCPSYS block is not documented in the datasheets available.
> > However
> > I did look at all the register and bit offsets and confirmed nothing
> > overlapped.
> >
> > > diff --git a/drivers/soc/mediatek/mtk-pm-domains.c
> > > b/drivers/soc/mediatek/mtk-pm-domains.c
> > > index 2689f02d7a41..12552c9996ac 100644
> > > --- a/drivers/soc/mediatek/mtk-pm-domains.c
> > > +++ b/drivers/soc/mediatek/mtk-pm-domains.c
> > > @@ -20,6 +20,7 @@
> > > #include "mt8173-pm-domains.h"
> > > #include "mt8183-pm-domains.h"
> > > #include "mt8192-pm-domains.h"
> > > +#include "mt8195-pm-domains.h"
> > >
> > > #define MTK_POLL_DELAY_US 10
> > > #define MTK_POLL_TIMEOUT USEC_PER_SEC
> > > @@ -576,6 +577,10 @@ static const struct of_device_id
> > > scpsys_of_match[] = {
> > > .compatible = "mediatek,mt8192-power-controller",
> > > .data = &mt8192_scpsys_data,
> > > },
> > > + {
> > > + .compatible = "mediatek,mt8195-power-controller",
> > > + .data = &mt8195_scpsys_data,
> > > + },
> > > { }
> > > };
> > >
> > > diff --git a/drivers/soc/mediatek/mtk-pm-domains.h
> > > b/drivers/soc/mediatek/mtk-pm-domains.h
> > > index 8b86ed22ca56..caaa38100093 100644
> > > --- a/drivers/soc/mediatek/mtk-pm-domains.h
> > > +++ b/drivers/soc/mediatek/mtk-pm-domains.h
> > > @@ -37,7 +37,7 @@
> > > #define PWR_STATUS_AUDIO BIT(24)
> > > #define PWR_STATUS_USB BIT(25)
> > >
> > > -#define SPM_MAX_BUS_PROT_DATA 5
> > > +#define SPM_MAX_BUS_PROT_DATA 6
> > >
> > > #define _BUS_PROT(_mask, _set, _clr, _sta, _update, _ignore) { \
> > > .bus_prot_mask = (_mask), \
> > > diff --git a/include/linux/soc/mediatek/infracfg.h
> > > b/include/linux/soc/mediatek/infracfg.h
> > > index 4615a228da51..3e90fb9b926a 100644
> > > --- a/include/linux/soc/mediatek/infracfg.h
> > > +++ b/include/linux/soc/mediatek/infracfg.h
> > > @@ -2,6 +2,109 @@
> > > #ifndef __SOC_MEDIATEK_INFRACFG_H
> > > #define __SOC_MEDIATEK_INFRACFG_H
> > >
> > > +#define MT8195_TOP_AXI_PROT_EN_STA1 0x228
> > > +#define MT8195_TOP_AXI_PROT_EN_1_STA1 0x258
> > > +#define MT8195_TOP_AXI_PROT_EN_SET 0x2a0
> > > +#define MT8195_TOP_AXI_PROT_EN_CLR 0x2a4
> > > +#define MT8195_TOP_AXI_PROT_EN_1_SET 0x2a8
> > > +#define MT8195_TOP_AXI_PROT_EN_1_CLR 0x2ac
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_SET 0x2d4
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_CLR 0x2d8
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_STA1 0x2ec
> > > +#define MT8195_TOP_AXI_PROT_EN_2_SET 0x714
> > > +#define MT8195_TOP_AXI_PROT_EN_2_CLR 0x718
> > > +#define MT8195_TOP_AXI_PROT_EN_2_STA1 0x724
> > > +#define MT8195_TOP_AXI_PROT_EN_VDNR_SET 0xb84
> > > +#define MT8195_TOP_AXI_PROT_EN_VDNR_CLR 0xb88
> > > +#define MT8195_TOP_AXI_PROT_EN_VDNR_STA1 0xb90
> > > +#define MT8195_TOP_AXI_PROT_EN_VDNR_1_SET 0xba4
> > > +#define MT8195_TOP_AXI_PROT_EN_VDNR_1_CLR 0xba8
> > > +#define MT8195_TOP_AXI_PROT_EN_VDNR_1_STA1 0xbb0
> > > +#define MT8195_TOP_AXI_PROT_EN_VDNR_2_SET 0xbb8
> > > +#define MT8195_TOP_AXI_PROT_EN_VDNR_2_CLR 0xbbc
> > > +#define MT8195_TOP_AXI_PROT_EN_VDNR_2_STA1 0xbc4
> > > +#define MT8195_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_SET 0xbcc
> > > +#define MT8195_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_CLR 0xbd0
> > > +#define MT8195_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_STA1 0xbd8
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_2_SET 0xdcc
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_2_CLR 0xdd0
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_2_STA1 0xdd8
> >
> > These all look correct.
> >
> > > +#define MT8195_TOP_AXI_PROT_EN_NNA0 BIT(1)
> > > +#define MT8195_TOP_AXI_PROT_EN_NNA1 BIT(2)
> > > +#define MT8195_TOP_AXI_PROT_EN_NNA GENMASK(2,
> > > 1)
> > > +#define MT8195_TOP_AXI_PROT_EN_VDOSYS0 BIT(6)
> > > +#define MT8195_TOP_AXI_PROT_EN_VPPSYS0 BIT(10)
> > > +#define MT8195_TOP_AXI_PROT_EN_MFG1 BIT(11)
> > > +#define
> > > MT8195_TOP_AXI_PROT_EN_MFG1_2ND GENMASK(22,
> > > 21)
> > > +#define MT8195_TOP_AXI_PROT_EN_VPPSYS0_2ND BIT(23)
> > > +#define MT8195_TOP_AXI_PROT_EN_1_MFG1 GENMASK(20,
> > > 19)
> > > +#define MT8195_TOP_AXI_PROT_EN_1_CAM BIT(22)
> > > +#define MT8195_TOP_AXI_PROT_EN_2_CAM BIT(0)
> > > +#define MT8195_TOP_AXI_PROT_EN_2_MFG1_2ND GENMASK(6,
> > > 5)
> > > +#define MT8195_TOP_AXI_PROT_EN_2_MFG1 BIT(7)
> > > +#define MT8195_TOP_AXI_PROT_EN_2_AUDIO_ASRC (BIT(8) |
> > > BIT(17))
> > > +#define MT8195_TOP_AXI_PROT_EN_2_AUDIO (BIT(9) |
> > > BIT(11))
> > > +#define MT8195_TOP_AXI_PROT_EN_2_ADSP (BIT(12) |
> > > GENMASK(16, 14))
> > > +#define MT8195_TOP_AXI_PROT_EN_2_NNA0_2ND BIT(19)
> > > +#define MT8195_TOP_AXI_PROT_EN_2_NNA1_2ND BIT(20)
> > > +#define MT8195_TOP_AXI_PROT_EN_2_NNA_2ND GENMASK(20,
> > > 19)
> > > +#define MT8195_TOP_AXI_PROT_EN_2_NNA0 BIT(21)
> > > +#define MT8195_TOP_AXI_PROT_EN_2_NNA1 BIT(22)
> > > +#define MT8195_TOP_AXI_PROT_EN_2_NNA GENMASK(22,
> > > 21)
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_CAM (BIT(0) |
> > > BIT(2) | BIT(4))
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_IPE BIT(1)
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_IMG (BIT(1) |
> > > BIT(3))
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_VPPSYS0 (GENMASK(2,
> > > 0) | GENMASK(8, 6) | \
> > > + GENMASK(12,
> > > 10) | GENMASK(21, 19) | \
> > > + BIT(31))
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_VDOSYS0 (GENMASK(5,
> > > 3) | BIT(9) | \
> > > + GENMASK(14,
> > > 13) | GENMASK(21, 17) | \
> > > + BIT(30))
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_VPPSYS1 GENMASK(8,
> > > 5)
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_VENC (BIT(9) |
> > > BIT(11))
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_VENC_CORE1 (BIT(10) |
> > > BIT(12))
> > > +#define
> > > MT8195_TOP_AXI_PROT_EN_MM_VDEC0 BIT(13)
> > > +#define
> > > MT8195_TOP_AXI_PROT_EN_MM_VDEC1 BIT(14)
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_VDOSYS1_2ND BIT(22)
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_VPPSYS1_2ND BIT(23)
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_CAM_2ND BIT(24)
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_IMG_2ND BIT(25)
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_VENC_2ND BIT(26)
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_WPESYS BIT(27)
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_VDEC0_2ND BIT(28)
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_VDEC1_2ND BIT(29)
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_VDOSYS0_2ND GENMASK(29,
> > > 22)
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_VDOSYS1 GENMASK(31,
> > > 30)
> >
> > There's significant overlap within this block. This means when the
> > base
> > VDOSYS0 power domain is on, all the overlapped protection bits get
> > turned
> > off. I'm not sure that's correct.
> >
> > Same goes for IMG, which overlaps with IPE.
> >
>
> Because the timing of enable & disable protection are different, we
> duplicate some control bit in different power domain.
>
> For example: IMG & IPE are parent and child relation, so IMG must power
> on before IPE, IPE must power off before IMG.
> We want to clear some bits (protection disable) when power on IMG and
> set some bits (protection enable) when power off IPE.
Could you add that as a comment? Otherwise it just looks weird.
And if some change related to the power sequencing order resulted
in the system hanging, we might not spot it so easily.
Thanks
ChenYu
> > > +#define
> > > MT8195_TOP_AXI_PROT_EN_MM_2_VPPSYS0_2ND (GENMASK(7,
> > > 0) | GENMASK(18, 11))
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_2_VENC BIT(2)
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_2_VENC_CORE1 (BIT(3) |
> > > BIT(15))
> > > +#define
> > > MT8195_TOP_AXI_PROT_EN_MM_2_CAM (BIT(5) |
> > > BIT(17))
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_2_VPPSYS1 (GENMASK(7,
> > > 6) | BIT(18))
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_2_VPPSYS0 (GENMASK(9,
> > > 8) | GENMASK(22, 21) | BIT(24))
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_2_VDOSYS1 BIT(10)
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_2_VDEC2_2ND BIT(12)
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_2_VDEC0_2ND BIT(13)
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_2_WPESYS_2ND BIT(14)
> > > +#define
> > > MT8195_TOP_AXI_PROT_EN_MM_2_IMG BIT(16)
> > > +#define
> > > MT8195_TOP_AXI_PROT_EN_MM_2_IPE BIT(16)
> >
> > And here, IMG and IPE are the same.
> >
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_2_VDEC2 BIT(21)
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_2_VDEC0 BIT(22)
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_2_VDOSYS0 BIT(23)
> > > +#define MT8195_TOP_AXI_PROT_EN_MM_2_WPESYS GENMASK(24,
> > > 23)
> > > +#define MT8195_TOP_AXI_PROT_EN_VDNR_1_EPD_TX BIT(1)
> > > +#define MT8195_TOP_AXI_PROT_EN_VDNR_1_DP_TX BIT(2)
> > > +#define
> > > MT8195_TOP_AXI_PROT_EN_VDNR_PCIE_MAC_P0 (BIT(11) |
> > > BIT(28))
> > > +#define
> > > MT8195_TOP_AXI_PROT_EN_VDNR_PCIE_MAC_P1 (BIT(12) |
> > > BIT(29))
> > > +#define MT8195_TOP_AXI_PROT_EN_VDNR_1_PCIE_MAC_P0 BIT(13)
> > > +#define MT8195_TOP_AXI_PROT_EN_VDNR_1_PCIE_MAC_P1 BIT(14)
> > > +#define MT8195_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_MFG1 (BIT(17) |
> > > BIT(19))
> > > +#define MT8195_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_VPPSYS0 BIT(20)
> > > +#define MT8195_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_VDOSYS0 BIT(21)
> > > +#define MT8195_TOP_AXI_PROT_EN_VDNR_2_NNA0 BIT(25)
> > > +#define MT8195_TOP_AXI_PROT_EN_VDNR_2_NNA1 BIT(26)
> > > +#define MT8195_TOP_AXI_PROT_EN_VDNR_2_NNA GENMASK(26,
> > > 25)
> > > +
> >
> > All these MT8195_TOP_AXI_PROT_EN_* bit offsets aren't documented.
> > Besides
> > the huge overlap above, it seems NNA also includes NNA0 and NNA1.
> >
> >
> > Regards
> > ChenYu
> >
>
> The detail of MT8195_TOP_AXI_PROT_EN_* bit is related to the bus
> design, so we don't descript the detail in datasheet.
>
> I will remove the unused power domain and data (like NNA) because these
> are not used in 8195 chrome project.
>
> Best Regards,
> Chun-Jie
>
> >
> > > #define MT8192_TOP_AXI_PROT_EN_STA1 0x228
> > > #define MT8192_TOP_AXI_PROT_EN_1_STA1 0x258
> > > #define MT8192_TOP_AXI_PROT_EN_SET 0x2a0
> > > --
> > > 2.18.0
> > > _______________________________________________
> > > Linux-mediatek mailing list
> > > Linux-mediatek at lists.infradead.org
> > >
> https://urldefense.com/v3/__http://lists.infradead.org/mailman/listinfo/linux-mediatek__;!!CTRNKA9wMg0ARbw!3jALcSgob2IQknQnQlIPVKd79QdKmXI1Y9X7kaQ2KR8AYdyP0V8Km3u_Cfq8VPMJ4-zn$
> > >
More information about the linux-arm-kernel
mailing list